• Journal of Korean Society of Steel Construction
• /
• v.15 no.3
• /
• pp.291-298
• /
• 2003

Recently, as the size of buildings structure becomes large increases, their mat area of building structure is supported or by an inhomogeneous foundation. This paper presents a vibration analysis on thick plates subjected to in-plane force is presented in this paper. The rectangular plate is isotropic, homogeneous, and composed of a linearly elastic material. A vibration analysis of the rectangular thick plate iwas done by useing ofarectangular finite element with 8 nodes and 9 nodes. In this study, the foundation was idealized as a Pasternak foundation model. A Pasternak foundation haves a shear layer on Winkler's model, which idealizes the foundation as a vertical spring. In order tTo analysze the vibration of a plate supported on by an inhomogeneous Pasternak foundation, the value of the Winkler foundation parameter of the central and border zones of the plate awere chosen as WFP1 and WFP2. (fFigure 4.). The Winkler foundation parameter of WFP1 and WFP2 is varied from 0 to 10, $10^2$, and $10^3$ and the shear foundation parameters is were 0, 5, and 10. The ratio of the in-plane force to the critical load iwas applied as 0.4 to 0.8

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.107-117
• /
• 2014

This study tests homogeneity and performs multiple comparison analysis among treatment levels of each factor group through t-test by materials and analysis of variance by structural type and service period. For that descriptive statistical analysis is performed for static and dynamic response characteristics and their ratios of calculated versus measured values based on a good many safety assessment reports for bridges. Homogeneity and post hoc test based on descriptive statistical analysis provide the measures for homogeneity identification among comparison groups in addition to the statistical reference values such as central tendency, variation and shape. This study is expected to be valuable for structural integrity assessment and design by comparing the measured and calculated values with the reference values for the homogeneous group identified, which can help the engineers review the adequacy of the values and put the group database to practical use.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.5
• /
• pp.410-418
• /
• 2006

Sexual maturity and growth characteristics of Octopus minor were investigated in 796 individuals from mud flats in Goorori, Muan-Goon, Korea. Gonadosomatic index (GSI) peaked between June and July in females and between November and January in males. The discrepancy in the index peaks between females and males might result from the earlier sexual maturation of males. The sex ratio was biased toward females (68%) in April and toward males (78%) in September, although the differences were not significant (p>0.05). In females, about 50% of individuals with a mantle length of 70.6 mm were sexually mature versus 100% of individuals with mantle lengths over 80 mm. In females, fecundity was also related to size, ranging from 44 eggs in individuals with a mantle length of 54 mm to 179 eggs in the female with a mantle length of 100.5 mm. The relationship between mantle length (ML) an body weight (BW) was BW=0.008 ML$^{2.2797}$ (n=389, r$^2$=0.83, p<0.01) in males and BW=0.029 ML$^{2.2797}$ (n=407, r$^2$=0.74, p<0.01) in females. Analysis of co-variation showed that the difference in the slopes of the two regression lines was significant (p<0.01). Analysis of mantle length-frequency for each month revealed 1 to 3 normal distribution modes. The growth parameters obtained by fitting the modal progression to the seasonalized von Bertalanffy growth function (VBGF) were ML$\infty$= 112.38 mm, K=1.9, C=0.90, and WP=0.1. The results indicate that the seasonal growth oscillation of the stock is very strong and winter is the season when growth is the slowest.

• Genomics & Informatics
• /
• v.13 no.4
• /
• pp.137-145
• /
• 2015

Selective sweep can cause genetic differentiation across populations, which allows for the identification of possible causative regions/genes underlying important traits. The pig has experienced a long history of allele frequency changes through artificial selection in the domestication process. We obtained an average of 329,482,871 sequence reads for 24 pigs from three pig breeds: Yorkshire (n = 5), Landrace (n = 13), and Duroc (n = 6). An average read depth of 11.7 was obtained using whole-genome resequencing on an Illumina HiSeq2000 platform. In this study, cross-population extended haplotype homozygosity and cross-population composite likelihood ratio tests were implemented to detect genes experiencing positive selection for the genome-wide resequencing data generated from three commercial pig breeds. In our results, 26, 7, and 14 genes from Yorkshire, Landrace, and Duroc, respectively were detected by two kinds of statistical tests. Significant evidence for positive selection was identified on genes ST6GALNAC2 and EPHX1 in Yorkshire, PARK2 in Landrace, and BMP6, SLA-DQA1, and PRKG1 in Duroc. These genes are reportedly relevant to lactation, reproduction, meat quality, and growth traits. To understand how these single nucleotide polymorphisms (SNPs) related positive selection affect protein function, we analyzed the effect of non-synonymous SNPs. Three SNPs (rs324509622, rs80931851, and rs80937718) in the SLA-DQA1 gene were significant in the enrichment tests, indicating strong evidence for positive selection in Duroc. Our analyses identified genes under positive selection for lactation, reproduction, and meat-quality and growth traits in Yorkshire, Landrace, and Duroc, respectively.

• Structural Engineering and Mechanics
• /
• v.59 no.3
• /
• pp.503-526
• /
• 2016

In-plane and out-of-plane free vibration analysis of Timoshenko curved beams is addressed based on the isogeometric method, and an effective scheme to avoid numerical locking in both of the two patterns is proposed in this paper. The isogeometric computational model takes into account the effects of shear deformation, rotary inertia and axis extensibility of curved beams, and is applicable for uniform circular beams, and more complicated variable curvature and cross-section beams as illustrated by numerical examples. Meanwhile, it is shown that, the $C^{p-1}$-continuous NURBS elements remarkably have higher accuracy than the finite elements with the same number of degrees of freedom. Nevertheless, for in-plane or out-of-plane vibration analysis of Timoshenko curved beams, the NURBS-based isogeometric method also exhibits locking effect to some extent. To eliminate numerical locking, the selective reduced one-point integration and $\bar{B}$ projection element based on stiffness ratio is devised to achieve locking free analysis for in-plane and out-of-plane models, respectively. The suggested integral schemes for moderately slender models obtain accurate results in both dominated and non-dominated regions of locking effect. Moreover, this strategy is effective for beam structures with different slenderness. Finally, the influence factors of structural parameters of curved beams on their natural frequency are scrutinized.

• Journal of Integrative Natural Science
• /
• v.1 no.2
• /
• pp.89-114
• /
• 2008

Interrelationship between heavy rainfalls and related with low-level jets(LLJ) is analyzed by using fifty cases of heavy rainfall events occurred over the Korean peninsula from 1992 to 2001. Those cases are classified with four synoptical features. There are 32% chances that the low pressure exist in heavy rainfall over than 150 mm per day case by case. Secondly Changma front and front zone account for 28% of all cases. The ratio of marine tropical boundary type and trough type record 22% and 18% respectively. The moist and warm south-westerly winds associated with low-level jets have been induced convective instability and baroclinic instability. Therefore, heavy rainfall due to the approach of a low pressure occurred at September and before Changma. During the period of Changma, this type has been happened heavy rainfall when low pressure and stationary front has vibrated south and north. Changma type has longer the duration time of precipitation than other types. Third type, located with marine Tropical boundary, have mainly rained in August and September. The last trough case locally downpoured in short time with developing cell. The occurrence low-level jets related to heavy rainfall has increased over 12.5 m/s wind speed. The result is that 43 heavy rainfalls out of 50 cases reach peak at the time of maximum precipitation intensity. Also, the variation of wet number and K-index corresponded with the variation of wind speed. It is found that the number of frequency of low-level jets with southwestward direction has been increased and these jets are mainly passed from the southwest toward to the northeast of the Korean peninsula in that time.

• Wind and Structures
• /
• v.21 no.3
• /
• pp.353-367
• /
• 2015

As concrete wind-turbine towers are increasingly being used in wind-farm construction, there is a growing need to understand the behavior of concrete wind-turbine towers. In particular, experimental evaluations of concrete wind-turbine towers are necessary to demonstrate the dynamic characteristics and load-carrying capacity of such towers. This paper describes a model test of a prestressed concrete wind-turbine tower that examines the dynamic characteristics and load-carrying performance of the tower. Additionally, a numerical model is presented and used to verify the design approach. The test results indicate that the first natural frequency of the prestressed concrete wind turbine tower is 0.395 Hz which lies between frequencies 1P and 3P (0.25-0.51 Hz). The damper ratio is 3.3%. The maximum concrete compression stresses are less than the concrete design compression strength, the maximum tensile stresses are less than zero and the prestressed strand stresses are less than the design strength under both the serviceability and ultimate limit state loads. The maximum displacement of the tower top are 331 mm and 648 mm for the serviceability limit state and ultimate limit state, respectively, which is less than L/100 = 1000 mm. Compared with traditional tall wind-turbine steel towers, the prestressed concrete tower has better material damping properties, potential lower maintenance cost, and lower construction costs. Thus, the prestressed concrete wind-turbine tower could be an innovative engineering solution for multi-megawatt wind turbine towers, in particular those that are taller than 100 m.

• Journal of the Korean Society for Railway
• /
• v.17 no.4
• /
• pp.260-269
• /
• 2014

Transition tracks are an alternative for enhancing the long-term serviceability and durability of concrete track components in railway bridges. The goal of this paper is to investigate the structural behavior for transition track systems of railway bridge deck ends. In this study, the structural behavior of transition tracks such as the variations in static, dynamic, and fatigue behaviors and dynamic properties (natural frequency and damping ratio) are assessed and compared through performing loading tests and finite element analyses using actual vehicle impact loadings. As a result, it is found that the structural behavior of the transition track system is expected to satisfy the actual vehicle impact loading, and the variation in the neutral axis and dynamic characteristics are not affected by the fatigue loading. Therefore, it is inferred that the structural capacity and long-term durability of the transition track system is proven.

• Plant Journal
• /
• v.12 no.3
• /
• pp.24-31
• /
• 2016

Wind-induced vibration is a phenomenon that a struture is oscillated due to wind force such as buffeting, vortex shedding wake and etc., which is one of important characteristics to be considered for design in case that stack has significant slenderness ratio or low natural frequency. International design standards of stack define several criteria for evaluating the suitability of stack design, which describe the required design considerations for each range of design parameters and provide the instruction to verify the stack design against wind-induced vibration simply. However, there is a limitation that they cannot provide quantitative information in case code requirement cannot be satisfied due to constraints of plant space or economical design. In order to overcome the limiation of code, integrated numerical analysis of computational fluid dynamics, harmonic analysis and finite element analysis were proposed to investigate wind-induced vibration for multiple stacks in actual plant. Simulated results of mutual wake interference effect between adjacent stacks were evaluated and compared to the criteria in international standards.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.12
• /
• pp.502-508
• /
• 2016

An optimized PI controller design method is presented to promote the control performance of an oil cooler system for high precision machine tools. First, a transfer function model of the oil cooler system with a variable rotating speed compressor was obtained by the perturbation method as the first order system with a negligible dead time. Then, the closed-loop control system was described as the second order system with a zero. Its dynamic behaviors are mostly governed by characteristic parameters, the damping ratio, and the natural frequency which is incorporated in PI gains. Next, an optimum integral of the time-weighted absolute error (ITAE) criterion was applied to the second order system. The characteristic parameters can be determined by the given design specifications, percent overshoots and settling times and comparisons with the ITAE criterion. Hence, the PI gains were plainly identified in a deterministic way. Finally, the PI gains were fine-tuned to obtain desirable dynamics in real systems, considering the zero effect and parameter variations. The validity of the proposed method was proven by computer simulations and real experiments for selected cases.