• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.533-536
• /
• 2008

Hopum is a new japonica rice cultivar developed from the cross between Milyang165 and F1 crossing Milyang165 and Iksan438 at Department of Rice and Winter Cereal Crop, NICS, RDA, in 2006. This cultivar has a short grain shape and about 141 days growth duration from direct seeding to harvesting in the southern plain including Chungcheong province. This cultivar has short culm and spikelet number per panicle is similar to that of Nampyeongbyeo, while filled grain rate is lower than standard variety. This cultivar has medium size of brown rice and shows moderate resistance to leaf blast, to bacterial blight pathogens of $K_1$, $K_2$ and $K_3$ and stripe virus disease but susceptible to major virus diseases and insect pests. The milled kernel of Hopum is translucent with non-glutinous endosperm. Protein and amylose content of Hopum is about 6.5% and 18.7%, respectively. This cultivar has better palatability of cooked rice than Chucheongbyeo harvested in Gyeongki province. Its milling recovery (76.8%) and percentage of perfect-shaped milled rice (94.7%) were higher than Nampyeongbyeo. The milled rice yield of Hopum was 5.83 MT/ha (15% higher than Juan) under wet-direct seeding, 5.66 MT/ha (8% higher than Juan) under dry-direct seeding, and 6.00 MT/ha (8% higher than Nampyeong) under ordinary transplanting cultivation. "Hopum" would be adaptable for ordinary transplanting and direct seeding in the southern plain including Chungcheong province.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.297-303
• /
• 2018

With the changing trend of the building construction to high rising and large scaling, the underground structure has been increased, and its usage also increased and variety. Hence, to protect the underground structure against underground water, various water proofing methods has been developed. Among the many water proofing methods, the combined water proofing method using both asphalt seal and sheet has been widely used to secure the sufficient performance and decrease the construction failure. However, during the summer period of extremely high temperature conditions, the asphalt sealing materials were separated and leaked into the structure. Therefore, the aim of the research is to provide the quality standard of asphalt sealing material based on the various temperature changes depending on seasons. According to the experimental results, the temperature of the sealing materials applied on the slab was increased up to $54^{\circ}C$ which was $3^{\circ}C$ higher than the structure temperature of $51^{\circ}C$. Based on the melting test for asphalt sealing materials applied on the outside wall of the structure, in the case of water-dispersing typed materials showed significant melting down due to its slow evaporation and low viscosity. Furthermore, from the accelerated test conducted indoor conditions, a solvent-type and water-dispersing typed materials showed significant melting down due to their low viscosity and melting point in ambient conditions. Based on these results, viscosity and melting point are found as the important factors on asphalt sealing materials' quality, and it is necessary to designate the quantitative level of the viscosity and melting point for quality control.

• The Korean Journal of Archival Studies
• /
• no.25
• /
• pp.3-46
• /
• 2010

Digital records management is one whole system in which many social and technical elements are interacting. To maintain the trustworthiness, the repository needs periodical audit and certification. Thus, individual electronic records management agency needs toolkit that can be used to self-evaluate their trustworthiness continuously, and self-assess their atmosphere and system to recognize deficiencies. The purpose of this study is development of self-certification toolkit for repositories, which synthesized and analysed such four international standard and best practices as OAIS Reference Model(ISO 14721), TRAC, DRAMBORA, and the assessment report conducted and published by TNA/UKDA, as well as MoRe2 and current national laws and standards. As this paper describes and demonstrate the development process and the framework of this self-certification toolkit, other electronic records management agencies could follow the process and develop their own toolkit reflecting their situation, and utilize the self-assessment results in-house. As a result of this research, 12 areas for assessment were set, which include (organizational) operation management, classification system and master data management, acquisition, registration and description, storage and preservation, disposal, services, providing finding aids, system management, access control and security, monitoring/audit trail/statistics, and risk management. In each 12 area, the process map or functional charts were drawn and business functions were analyzed, and 54 'evaluation criteria', consisted of main business functional unit in each area were drawn. Under each 'evaluation criteria', 208 'specific evaluation criteria', which supposed to be implementable, measurable, and provable for self-evaluation in each area, were drawn. The audit and certification toolkit developed by this research could be used by digital repositories to conduct periodical self-assessment of the organization, which would be used to supplement any found deficiencies and be used to reflect the organizational development strategy.

• Korean Journal of Heritage: History & Science
• /
• v.44 no.4
• /
• pp.56-69
• /
• 2011

A Gamsil is an ritual instrument which enshrine the ancestral tablets of four lines from late great-great-grandfather and grandmother to late father and mother. This has their soul. Juja's "Garye" informs its structure pattern. It is placed in Sadang and takes the form of a perfectly square box. It partitions four rooms and enshrine an ancestral tablet room by room. They get the ancestral tablets line up from west to east. And they also enshrine the ancestral tablets without his descendant together in Gamsil. A Gamsil is a space to enshrine the ancestral tablets and to place an order within a family. A social status and A family economic power become a standard in making and managing Sadang. Kingdom in Joseon period limited the ancestral tablets considering of his degree of official rank which descendant enshrined. A official servant can be stable economically in getting a stipend and build sadang in the house. While household a little in economic enshrine the ancestral tablets at a Gamsil placed at the a space of private home. His personal circumstances make size and pattern, place change in relation to Gamsil. A Gamsil looks like house in structure and pattern. It has the immortality of the soul. And it changed from a table size to a ancestral tablet size. This Gamsil is comfortable to move and is made considering of the width and height of household. The transition of Gamsil means institutions is in close to a family economic power in social change. Kingdom in Joseon early period makes a policy of a Gamyo's build and an ancestral enshrine in basement of Juja's "Garye". The transition of Gamsil gave a common people limitted socially and institutionally the service of late four lines. Most of people enshrine the ancestral tablets of their four lines in approaching of in the late of Joseon Dinasty. They compromise on their reality and cause. The transition of Gamsil implied many different things in social ; the authenticity search and a dignity expression of his family, the foundation for the diffusion of an ancestral service, a space sharing with ancestor and descendent, the increment of a family economic power etc.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.128-159
• /
• 2010

In this study, the progress of domestic cultural properties designation, the changes and problems in classification were examined, and the relationship among Traditional Pal-kyung, Dongcheon-gukok, and Modern Pal-kyung were investigated targeting total of 68 cases of state-designated cultural properties of scenic sites in order to show that the traditional significance and value are being inherited today. The major results of this study are as follows. First, increase in scenic site designations with historical, cultural, and scenic characteristics can be viewed as an active intent to embrace the concepts such as cultural utilities, historical characteristics, literary value, and ideological backgrounds, which were specified as the basis for designation in the early Cultural Property Protection Law. Accordingly, it is very encouraging that the concept of cultural attractions such as traditional gardens and observatory points are regarded as an important standard for designation of scenic sites. Second, as for the classification of scenic sites per type, it was found that 'places with excellent natural scenery' were 44.16%(30 cases), followed by 'famous buildings or gardens and places with important legend' occupying 30.9%(21 cases), 'places with famous scenery' occupying 13.2%(9 cases), 'places with outstanding historical cultural and scenic value' that occupying 10.3%(7 cases), and 'animal and vegetation habitat with beautiful scenery' (1 case). Third, according to the current classification standards for scenic sites, there were only 7 cases which could be classified into Pal-kyungs(Famous 8 Sceneries) and 3 cases classified into Dongcheon(beautiful scenery surrounded by mountains and rivers), but there was no Gugok(beautiful valleys). Consequently, in terms of external appearance, the scenic sites among the total scenic sites that could be classified into Palkyung and Gugok were only 14.7%(10 cases). Fourth, the traditional scenic sites based on literal references and Internet analysis occupied 67.7%(46 cases), which were found to be scenic sites related to the traditional Pal-kyung among which 38 cases(55.9% of 46 cases) were included based on the scenery and 8 cases(11.8% of 46 cases) were included due to the scenery at the time. Fifth, there were 8(11.8%) scenic sites which were related to Dongcheon, and 4 cases(5.9%) related to Gugok. Also, it was found that total of 40(48.9%) scenic sites designated as modern scenic sites were playing the role of local scenic sites, and they were used as the tourism advertising contents. Sixth, it was identified that there were 62 cases(91.2%) of scenic sites in total related to traditional and modern Pal-kyung or Dongcheon-gugok, and unlike explicit classifications, most of the designated scenic sites were found to be deeply connected with the historical and cultural significance contained in the scenaries.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.172-193
• /
• 2013

This study examines the production techniques and raw materials shown in the Korean dried-lacquer statues of Buddha through a careful observation of the Seated Dried-lacquer Bodhisattva Statue from the late Goryeo Dynasty which is currently possessed by Okura Museum of Art in Tokyo. As a method of study, the X-ray data and the results from a field survey were combined to analyze the production techniques and the characteristics of raw materials. Based on this analysis, a hypothesis was established on the production process and verified through a reenactment of the actual production process. Then, the characteristics of the techniques applied to each process and the raw materials were recorded in detail. Specifically, the dried lacquer techniques and the raw materials were estimated based on the results of naked-eye observation in comparison with the literature, especially the records of "Xiu Shi Lu" written by Huang Cheng of the Ming Dynasty which is considered as 'the textbook of lacquer techniques.' The raw materials used in the production of the traditional Korean lacquerware inlaid with mother-of-pearl were also referenced. As a result, it was found that the features of production techniques and the raw materials found in the Statue at Okura Museum of Art have many similarities with those of the Seated Dried-lacquer Statue of Lohan (Arhat) from Yuanfu 2 Nian Ming (1098) of the Song Dynasty which is currently at the Honolulu Museum of Art. In particular, the similarities include that the interior of the statue being vacant because the clay and the wood core were not replaced after being removed from the prototype, that the complete form was made in the clay forming stage to apply the lacquer with baste fiber fabric, that the clay and the wood core were removed through the bottom of the statue, and that the modeling stage was omitted and the final coat over the statue is very thin. Additionally, decorating with ornaments like Bobal and Youngrak made of plastic material was a technique widely popular in the Song Dynasty, suggesting that the Seated Dried-lacquer Bodhisattva Statue in Okura Museum of Art was greatly affected by the production techniques of the Dried-lacquer Buddha Statue from the Song Dynasty. There is no precise record on the origin and history of the Korean Dried-lacquer Buddha Statues and the number of existing works is also very limited. Even the records in "Xuanhe Fengshi Gaoli Tujing" that tells us about the origin of the Dried-lacquer Buddha Statue from the Yuan Feng Period (1078~1085) do not indicate the time of transmission. It is also difficult to trace the clear route of transmission of production techniques through existing Dried-lacquer Buddha Statues. Fortunately, this study could at least reveal that the existing Dried-lacquer Buddha Statues of Korea, including the one at Okura Museum of Art, have applied the production techniques rather differently from those used in the production of Japanese Datsukatsu Dried-lacquer Buddha Statues that have been known as the standard rule in making dried-lacquer statues of Buddha for a long time.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.329-358
• /
• 2005

The Three storied Stone pagoda in Gameunsa Temple site, one of the early staged stone pagodas, has been known as a standard for Silla stone pagodas. A stone pagoda is not only a stone art work and but also a stone structure. Most studies and investigation of the stone pagoda has done mainly based on style and chronological research according to an art historical view. However, there is not an attempt to research the stone pagoda as a stone architecture. Most Korean experts at the stone pagoda has art history in their background. Engineers who can understand the structure of the stone pagoda are very limited. More architectural and engineering approach is need to research not only art historial understanding but also safety as a structure. We can find many technical know-how from our ancestors who made stone pagodas. 1. To reduce any deformation such as relaxation and sinking of BuJae which is caused by a heavy load, the BuJae (consist of a foundation stone and lower stereobates) should be enlarged. 2. A special construction method for connection between Myonsuk and Tangjoo was invented. This unique method is not used any longer after the Three storied Stone pagoda in Gameunsa Temple site. 3. The upper BuJae and the lower BuJae are missed each other by making a difference of Okgaesuk and Okgaebatchim in size. It is done for a distribution of perpendicular load and a prevention for relaxation of BuJae. 4. The center of gravity in the BuJae is located to the center of the stone pagoda by trimming the upper surface of the Okgaebatchim into a convex shape. The man who made stone pagodas had excellent knowledge on the engineering and techniques to understand the structure of the stone pagodas. We can confirm it as follows: the enlarged BuJae, dislocated connection between upper Bujae and lower BuJae, and moving the center of gravity close to the center of the stone pagoda.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.243-280
• /
• 2006

At the Bujang-ri Site, Seosan, South Chungcheong Province, around 220 archaeological features, including semi-subterranean houses and pits of Bronze Age and semi-subterranean houses, pits, and burials of Baekje period had been identified and investigated. In Particular, mound burials No. 5 of 13 of Baekje mound burials yielding a gilt-bronze cap along with other valuable artifacts drew international scholarly attention. The gilt-bronze cap from the mound burial No. 5 is a significant archaeological data not only in the study of Baekje archaeology but also in the study of international affairs and exchange at that time. At the time of exposure, the gilt-bronze cap was already broken into a number of pieces and seriously damaged by corrosion, and hardening and urethane foam were necessary in the process of collecting its pieces. Ahead of main conservational treatments on cap, X-ray photograph and CT(computerizes tomography) were taken in order to examine interior structure of the cap and to decide appropriate treatments. In the five layers identified in the profile of cap, a textile layer was set between a metal and a layerof bark of paper birch for avoiding direct contact of the metal and the bark of paper birch. Analyses were executed for examining textile layer and a layer of fibroid material. According to microscopic analysis, while the textile layer consisted of the simplest plain fabric with one fold among three kinds of textile structures, the layer of fibroid material was mixed with two or three kinds of fibers. A comparative analysis with standard sample using FT-IR (Fourier Transform Infrared Spectroscopy) announced that both textiles and fabrics were hemp. Analysis of kind of the paper birch resulted in barks of paper birch with 15 fold. A metallographic microscope, SEM, and WDS were used for the analysis of microscopic structures of plated metal pieces. While amalgam plating was treated as a plating method, the thickness of the plated layer, a barometer of plating technique, was ranged from $1.72{\mu}m$ to $8.67{\mu}m$. The degree of purity of gold (Au) used in plating was 98% in average, and less than 1% of silver (Ag) was included.

• Journal of Korea Foundry Society
• /
• v.41 no.2
• /
• pp.144-152
• /
• 2021

Based on the analysis of the current state of the world's foundry industry, we looked at the international competitiveness of Korea's foundry industry for the past 20 years. Korea's total foundry production is 2.52 million tons, and the production per company (so-called productivity) is 2,831 tons, which is the eighth largest in the world and down one position for the case of total foundry production, while productivity remains its position compared to three years ago. Korea is the only one of the top 10 foundry to see a decline in production. Similar to the global situation, Korean products consist of 38% of grey csat iron, 31% of ductile cast iron, 15% of aluminum, and 9% of cast steel. In order to obtain statistics on Korea's foundry industry, the survey conducted a service project for approximately nine months from April 2020. Various statistical surveys and sample in-depth surveys by the Korean standard industry class were evaluated for various contents of the domestic casting industry. We also looked at the number of companies, the distribution by region, the number of workers and the percentage of foreigners, and the distribution of each job, as well as the R&D investment status according to the size of the enterprise. Together, sales, exports, sales and various profit ratios were analyzed to measure the earning power of foundry industry. In addition, the classification by grouping the foundry industry according to the process utilized by focusing on each company, and to determine the sales, exports, and yield status for each process was also investigated on the basis. Based on these data, the domestic foundry industry has presented a variety of offers for the following issues for sustainable growth; global ranking, marginal corporate restructuring, training of domestic technical people, differentiated support policies by company size and process.

• (The)Study of the Eastern Classic
• /
• no.69
• /
• pp.451-479
• /
• 2017

The objective of this study is to examine the tasks for listing martial arts of "Muyedobotongji" on the UNESCO Representative List of Intangible Cultural Heritage of Humanity. The conclusions are like below. First, "Muyedobotongji" was published in 1790(14th year of King Jeongjo). The 24 martial arts of "Muyedobotongji" were basically divided into three types like stabbing, chopping & cutting, and hitting. Second, the value of martial arts of "Muyedobotongji" is highly evaluated because it has systematically put together the martial arts of three countries like Korea, China, and Japan of the 18th century, suitable for the actual status of Joseon Dynasty, in the new perspective. The value of "Muyedobotongji" as a Memory of the World is the martial arts book emphasizing the practicality, so that everyone including officers and soldiers could easily learn. Third, the procedure of registering martial arts of "Muyedobotongji" in the UNESCO Representative List of Intangible Cultural Heritage of Humanity has three stages including preparation/submission, screening, and decision, which takes two years. Especially, the screening assistance organization, as an organization under the Intangible Cultural Heritage Convention Intergovernmental Committee is composed of total six countries(one for each area) out of 24 member countries. Fourth, the tasks for listing martial arts of "Muyedobotongji" in the UNESCO Representative List of Intangible Cultural Heritage of Humanity are like following. (1) It would be necessary to conduct a total inspection of the collection of "Muyedobotongji". (2) It would be necessary to designate the martial arts of "Muyedobotongji" as the municipal/provincial/national intangible cultural heritage. (3) It would be needed to standardize the practical martial arts technique/movement of "Muyedobotongji". (4) The historical evidence of martial arts costumes/weapons of "Muyedobotongji" should be studied. (5) A committee for the registration of martial arts of "Muyedobotongji" in the UNESCO Representative List of Intangible Cultural Heritage of Humanity should be organized. (6) There should be a close cooperation system between relevant departments like the World Heritage Team of Cultural Heritage Administration and the Ministry of Foreign Affairs. (7) Domestic/foreign data related to martial arts of "Muyedobotongji" should be comprehensively collected to meet the registration standard of UNESCO. (8) The registration type of Intangible Cultural Heritage of Humanity should be prepared.