• Journal of Fashion Business
• /
• v.21 no.5
• /
• pp.91-108
• /
• 2017

Interests in 3D virtual clothing technology and its application in online shopping malls are increasing with the advent of the Fourth Industrial Revolution. Most studies on 3D virtual clothing, however, are focused on observing drapes or ease of virtual clothing depending on fabric properties of representative clothing items. Therefore, the purpose of this study is: first, to determine if current input of typical material characteristics in 3D CLO are sufficient to formulate virtual skirts with different front and back silhouettes; second, to determine if subjective appearance evaluation matched physical shape characteristics of those skirts. In this study, appearances of typical cotton, wool, silk, rayon, and polyester skirts with different front and back pattern were compared between actual and virtual clothing depending on fabric materials. Subjective appearance evaluation was conducted by 7 experts regarding similarity between actual and virtual clothing with a 5-point scale. For objective evaluation of the both types of skirt shape, degree of roundness at the cross section, displacement of side seam, position of back waistline, and the number of folds at the skirt back were observed. In the case of cotton and wool, not the subjective appearance evaluation as well as shape characteristics of virtual skirts were well matched to the actual shape of skirts with a few material inputs. However, current material inputs for silk, rayon and polyester were insufficient to cover material differences in formation of virtual skirts with different front and back silhouettes.

• Journal of Information Technology Services
• /
• v.16 no.3
• /
• pp.17-45
• /
• 2017

Health Information Exchange (HIE) is expected to improve the quality and efficiency of care by allowing providers online access to healthcare information generated by other providers at the point of care. However, the adoption of the technology in Korea has been slow since its pilot program in 2007~2010 at Seoul National University Bundang Hospital. The objective of this study was to survey stakeholders on the incentive program for the facilitation of HIE adoption. We surveyed 39 experts representing 6 categories of stakeholders-provider, insurer, government, information service firms, customers, and medical informatics experts for the interviews. Interview questions included program objectives, program participation requirements, incentive payment method, and administrative burden for program participation. Experts indicated that the quality of care was the most important value the program should aim to achieve through the HIE adoption. They suggested that the requirements and administrative burden for participation should be kept at minimum to recruit a large number of providers to the program, which is an indicator of program success. Experts were divided on the payment method whether the incentive should be paid as a part of the fee payment scheme operated by the National Health Insurance (NHI) or should be a payment made independent of the NHI. The source of the divide was conflict of interest among stakeholders as to who pays for the program, and the insurer and consumer groups were against the NHI taking the financial burden. It appeared to be the most significant factor for the successful program launching to resolve the gap in perceptions about benefits of the technology among stakeholders and to win the willingness to pay for the program.

• Journal of Nutrition and Health
• /
• v.46 no.6
• /
• pp.552-559
• /
• 2013

This study is conducted in order to investigate the prevalence of vitamin mineral (VM) supplement use and its related factors among Korean adolescents. Using a cross-sectional study design, information was obtained by questionnaires from adolescents selected by stratified sampling in large, small and middle-size cities, as well as rural areas of the whole country, followed by convenience sampling. The total number of participants in this study was 1,407 adolescents ($15.2{\pm}1.6$ years) attending middle or high schools, chosen from various cities and rural areas in Korea. The prevalence of VM supplement use was 65.5%, and there was no significant difference between the genders. City dwellers took VM supplements more frequently than those adolescents from rural areas (p < 0.01). The VM supplement users tended to have higher family income, parents' academic background, and socioeconomic status, respectively (p < 0.001). The greater part of VM supplement users replied that they acquired their nutritional information from their parents, relatives and friends, while many nonusers replied that they did it from school classes (p < 0.05). Compared to nonusers, VM supplement users had greater 'self concern about health' (p < 0.05), 'parents' concern about child's health, growth, and nutritional intake' (p < 0.001), and 'parents' concern about child's grade point' (p < 0.01). However, there was no significant difference between users and nonusers when it came to 'self perception of body shape' or 'BMI'. In addition, users significantly had greater nutritional beliefs concerning VM supplements than nonusers (p < 0.001). These results showed that VM supplement use has been common among adolescents in Korea, and supplement use of subjects has been related with various factors. Among them, it was shown that especially parents great influence the use of VM supplements by adolescents. Thus, not only education for adolescents, but also that for parents is needed to help adolescents take VM supplements properly.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.3
• /
• pp.62-69
• /
• 2014

This paper presents a preliminary study of a convergent divergent nozzle in an afterburning turbofan engine of a supersonic aircraft engine. In order to design a convergent divergent nozzle, cycle model of a low bypass afterburning turbofan engine of which thrust class is 29,000 lbf at a sea level static condition is established. The cycle analysis at the design point is conducted by Gasturb 12 software and one dimensional gas properties at a downstream direction of the turbine are obtained. The dimension and configuration of an model turbofan engine are derived from take-off operation with wet reheat condition. The off-design cycle calculation is conducted at the all flight envelope on the maximum flight Mach number of 2.0 and maximum flight altitude of 15,000 m.

• Journal of Fisheries and Marine Sciences Education
• /
• v.6 no.2
• /
• pp.190-197
• /
• 1994

In this paper, 2513 marine casualties occurred in Korean waters, during 1989-1993, were analysed by the Multivariate Data Analysis Method. The main results obtained were as follows : 1. Moat of marine casualties resulted from the human factors such as careless operation and insufficient engine maintenance. Engine trouble accounted for main patten of accidents and great number of accidents occurred in fishing vessels. 2. From the point of view of the damage of human life and properties, accidents took place in cargo ships, passenger ships and tankers were serious, but in fishing vessels, those were not so serious. 3. Grounding, collision mainly resulted from careless operation, however flooding and capsizing were much affected by bad weather and material defect.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.6
• /
• pp.705-712
• /
• 2001

It is of great importance to represent the directional ocean waves in a laboratory basin for hydraulic model tests. The directional ocean waves can be expressed as a linear superposition of a large number of component waves with different frequencies and propagating directions. The aim of the study is to check the wave generating characteristics by serpent-type wave generating system in PKNU (Pukyong National University) which is composed of 10 piston-type wave generators. In the experiment, spatial variation of irregular wave heights and propagating angles are measured in the multi-directional wave maker basin. Target wave directional spectrum is reproduced in the area of multi-directional wave maker basin. The directional spreading of the generated waves varied spacially in the basin. They differed from target spectrum as the measurement point becomes far from the center line normal to the generator face, The effective generation area where that target can be reproduced is limited to the triangular area attached the generator face. According to the results, it is emphasized that the effective experiment area in the basin considered wave generator characteristics should be determined in consideration of experimental conditions including structural shapes, water depth, wave directionality etc.

• Journal of National Security and Military Science
• /
• s.5
• /
• pp.203-239
• /
• 2007

The current problems with the changing nature of the battlefield of the future point up the serious need for more and better research on the nature of effective military leadership. The purpose of this study was to examine effective leadership traits and behaviors of junior officers in combat situation. During times of peace, leader study battles and imagine themselves in all sorts of combat situations while at the same time, they must cope with numerous challenges and fill a variety of roles that they perceive are not battle related. This illustrates one of the fundamental paradoxes of the peacetime environment. Early studies, showing that combat leadership and noncombat leadership needed different talents, produced some clusters of traits which good combat leader were said to possess. Good combat leaders, for example, were described as possessing courage(e.g., bravery, fearlessness, daring, prowess, gallantry, guts, intrepidity, undaunted courage, fighting spirit, aggressive action), personal integrity(e.g., sincerity, flair, calmness, modesty), adaptability(e.g., flexibility, rapidity in action, speedy decision-making, clarity of thought) and so on. Behaviors found to be important in both combat and noncombat situations bore some relation to role requirements common to both situations. Behaviors important in one situation but not the other could be explained in terms of situational differences in role requirements for effective leadership. In order to achieve this purpose, a number of literature reviews were analysed. These results, though obtained in a somewhat rough and ready fashion, were useful not because they pointed to different leaders in war and in peace, but because they showed leaders the different things that were expected of them in different situations. It was also worth knowing how develop combat leadership. While these findings clearly suggest combat and noncombat differences, they do not necessarily confirm the complete study on effective leadership in combat situation. In conclusion, this study would be useful basis for further improvement on effective combat leadership and some further researches were recommended.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.15-23
• /
• 2017

The WGS conversion project of cadastral drawing (promoted by the Ministry of Land) is not able to reflect the cadastral registration due to subtle differences such as area and location. When converting the digital cadastral region to the world geodetic system, the boundary point coordinates must be changed to the legal coordinate units. However, there is a phenomenon that occurs in which the minute area changes do not coincide with the area registered in the cadastral registration when the coordinate unit is changed. In this study, we have developed a method to adjust many parcels collectively by applying a passive fine-tuning method used in cadastral resurvey project to solve these problems. Total 1, total 2+1, interval 1, interval 2+1, etc. were classified based on the number of parcels that need to be considered for the range of adjustment and the area condition. The analysis of the experimental area (after developing SW for comparison of each method) showed that the total 2+1 method is suitable for the location accuracy and the interval 2+1 method is suitable for the temporal efficiency.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.96-104
• /
• 2017

A one-shot system (device) refers to a system that is stored for a long period of time and is then disposed of after a single mission because it is accompanied by a chemical reaction or physical destruction when it operates, such as shells, munitions in a defense weapon system and automobile airbags. Because these systems are primarily related with safety and life, it is required to maintain a high level of storage reliability. Storage reliability is the probability that the system will operate at a particular point in time after storage. Since the stored one-shot system can be confirmed only through inspection, periodic inspection and maintenance should be performed to maintain a high level of storage reliability. Since the one-shot system is characterized by a large loss in the event of a failure, it is necessary to determine an appropriate inspection period to maintain the storage reliability above the reliability goal. In this study, we propose an optimal inspection policy that minimizes the total cost while exceeding the reliability goal that the storage reliability is set in advance for the one-shot system in which periodic inspections are performed. We assume that the failure time is the Weibull distribution. And the cost model is presented considering the existing storage reliability model by Martinez and Kim et al. The cost components to be included in the cost model are the cost of inspection $c_1$, the cost of loss per unit time between failure and detection $c_2$, the cost of minimum repair of the detected breakdown of units $c_3$, and the overhaul cost $c_4$ of $R_s{\leq}R_g$. And in this paper, we will determine the optimal inspection policy to find the inspection period and number of tests that minimize the expected cost per unit time from the finite lifetime to the overhaul. Compare them through numerical examples.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1967-1972
• /
• 2016

This paper defines a distance graph for a hand region in a depth image and proposes an algorithm detecting finger using it. The distance graph is a graph expressing the hand contour with angles and Euclidean distances between the center of palm and the hand contour. Since the distance graph has local maximum at fingertips' position, we can detect finger points and recognize the number of them. The hand contours are always divided into 360 angles and the angles are aligned with the center of the wrist as a starting point. And then the proposed algorithm can well detect fingers without influence of the size and orientation of the hand. Under some limited recognition test conditions, the recognition test's results show that the recognition rate is 100% under 1~3 fingers and 98% under 4~5 fingers and that the failure case can also be recognized by simple conditions to be available to add.