• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.2
• /
• pp.73-80
• /
• 2014

A camera module that gathers visual information via aerial observation reconnaissance is equipped inside a gimbal structure. This gimbal structure system must reduce dynamic responses in order to obtain clear images under all circumstances. Among many design specifications for this system, there is MIL-STD-810G as a shock standard. This specification indicates a limitation of the acceleration of the camera module under a base shock excitation on the gimbal structure. The satisfaction of this condition can usually be proved by experiment, because it includes bearings and dynamic isolators made of rubber. Numerical analysis must be proposed for design improvement of the gimbal structure. To achieve this goal, transient response analysis for the base shock excitation was performed using the finite element method. Experimental results were compared with numerical solutions and it is shown that the present method is useful.

• Journal of the Korean Society for Heat Treatment
• /
• v.30 no.5
• /
• pp.187-196
• /
• 2017

High temperature flow behaviors of AISI 4340 steel were investigated using isothermal compression tests under the temperature range from 850 to $1100^{\circ}C$ and a strain rate from 0.01 to $10s^{-1}$. The flow stress decreased with increasing compression temperature and decreasing strain rate. The dynamic softening related to the dynamic recrystallization was observed during hot deformation. The constitutive model based on Arrheniustyped equation with the Zener-Hollomon parameter was used to simulate the hot deformation behavior of AISI 4340 steel. The modification of the Zener-Hollomon parameter and lnA parameter resulted in the improvement of the calculation accuracy of the proposed constitutive model compared with the experimental flow curves. In addition, the process map of AISI 4340 steel was proposed. The instable process condition for hot deformation was predicted and its reliability was verified with the experimental observation.

• Journal of Technology Innovation
• /
• v.20 no.2
• /
• pp.75-107
• /
• 2012

Previous researches on technological innovation have several limitations such as lack of general mechanism for technological innovation(inputs, throughputs and outputs of technological innovation), large company oriented studies, and ignoring importance of technology management capabilities. So, this study suggested a new model using resource-based theory and system theory, and empirically applied that to SMEs. Structural equation model analysis by using 223 SMEs in Daegu region provided a support for most of hypotheses. Research results showed that all of factors on technological innovation were significantly and positively related with each other: inputs(R&D leadership, innovation strategy, R&D investment, R&D human resource management, external network), throughputs(portfolio management, project management, technology commercialization) and output(technological innovation). In case of technological innovation inputs, R&D leadership influenced on innovation strategy positively and significantly. And R&D leadership and innovation strategy had positive and significant effects on R&D investment, R&D human resource management and external network. R&D human resource management and external network exerted positive and significant influences on technological innovation throughputs such as portfolio management and project management. But R&D investment did not significant impacts on technological innovation throughputs. Among technological innovation throughputs, both portfolio management and project management had positive and significant effect on technology commercialization. In addition, technology commercialization acted positively and significantly technological innovation output. This study suggests necessary of efforts to implement innovation strategy and manage R&D human resource effectively based on CEO's innovativeness and entrepreneurship. Also, if SMEs want to develop technology and commercialize it, they have to cooperate with external technology resources and informations. Research results revealed that proper level of R&D investment, internal and external communication, information sharing, and learning and cooperative culture were very important for improvement of technological innovation performance in SMEs. Especially, this research suggested that if SMEs manage technological innovation process effectively based on resource-based and system approaches, then they can overcome their resource limitations and gain high technological innovation performance. Also, useful policy support for technological innovation of central or regional government by this research model is important factor for SMEs' technological innovation performance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05a
• /
• pp.162-164
• /
• 2002

The luminance and discharge characteristics of ac PDP are significantly affected by $H_2O$ or a small amount of residual gas in ac PDP. These residual gases such as $H_2O$, Air, CO and $CO_2$ can be contained in the manufacturing or discharge process. By high temperature annealing, this impurity gas can be decreased. The sample exhausted at high temperature showed better discharge characteristics than those exhausted in $25^{\circ}C$. As a result, the high temperature exhaust causes lower discharge voltage and shorter aging time.

• Journal of Korea Technology Innovation Society
• /
• v.17 no.4
• /
• pp.733-762
• /
• 2014

The government mandates that national research facilities & equipments through R&D business budget should be registered on the National Science and Technology Information Service (NTIS) for the purpose of the efficient use of the research facilities & equipments. This study is to contribute to the national policies on the efficient management of the research facilities & equipments by recognition methodology with the university's members and analysis of the impact factors of the universities' registration process improvement through the Define level and Measure level of the Six Sigma DAMIC. The survey and interview were conducted on research directors, professors joining university administration, graduate students, researchers, and staffs of A University. The findings are the lack of understanding specific steps and life-cycle management of research facilities & equipments. It is necessary to collect suggestions from universities and pursue policies considered the unique characteristics of the university for advanced operating and maximizing use of university's national research facilities & equipments. Research facilities & equipments enrollment compliance rate and registration accuracy were selected as CTQ-Y through the Six Sigma. 72 potential cause variables were derived through Process Map and C & E Diagram. 13 variables were determined as core potential factors through the X-Y Matrix and Pareto Chart. Research institutions should maximize utilization of research facilities & equipments through deriving a potential variables of the process improvements and designing a detail improvements based on the characteristics of each institutions.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.2
• /
• pp.430-456
• /
• 2009

The industrial Technology Development Program enables the recipient to set up technology infrastructure and to facilitate technology diffusion. In return, government charges royalties to the program recipient. However, the current royalty system is not effective form. This study analyzes the various aspects of royalty collection methods applied to the Industrial Technology Development Program and recommends the following: a) to establish a royalty collection system with appropriate charges for both fixed royalties and running royalties, dependent upon type of technology development b) to seek a method to setup different collection periods for industrial categories in consideration of product life cycle c) to review on ownership of intangible property. In addition, in order to manage the entire royalty process effectively, prompt establishment is needed in order for a responsible evaluation institute to create task forces to evaluate technology value, to transfer technology, to support technology commercialization, to collect and manage royalty and expand and report result.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.341-349
• /
• 1999

Ever since the ISO (International Organization for Standardization) established the ISO 9000 Family standard in 1987, many countries have selected this as their national standard and have provided support for its implementation and conducted assessment activities on the results of its implementation. Likewise, certification assessment was first begun in Korea in 1994, with the result that over 7,600 certificates have been issued to domestic enterprises during the past 5 years or so. This is significant not only in the remarkable growth rate in terms of quantity but also in the fact that it has made possible the establishment of a quality system that meets international standards among Korean enterprises. In this article, it will briefly introduce the establishment and certification of the ISO quality system for those organizations that are complying with the quality system as a part of the process of strengthening their quality competitiveness. For those organizations that have already established the quality system and implemented it for years, we will show the direction for continuous quality improvement in order for these organizations not only to fulfill the requirements but to maintain the superiority of the quality system and their management quality. In addition, it will show what preparations are necessary for organizations and certification bodies in order to expand a manufacturing process-oriented quality system to one that is geared to the total management quality.

• Journal of the Korean Ceramic Society
• /
• v.54 no.5
• /
• pp.380-387
• /
• 2017

In this study, unstable CaO was converted into a stable Ca compound by using carbonation in a circulating fluidized bed boiler of fly ash to confirm material usability as cement admixture; also undertaken was carbonation test and mortar to examine chemical and physical change by measuring absorption rate and compressive strength. To investigate the chemical properties of circulating fluidized bed boiler fly ash, XRD and TG-DTA were used to determine how the properties of the reaction product change quantitatively during carbonation. In order to stabilize CaO, carbonation of CaO is considered to be the most desirable process. This is because $CaCO_3$, which is a Ca compound, was produced by carbonate reaction of unstable CaO, and decrease of the absorption rate and improvement of the compressive strength were observed when the carbonated fly ash was replaced with cement.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.655-663
• /
• 2021

This paper aims to develop a conceptual framework for determinants of spillover effects of FDI on technology innovation of Vietnamese enterprises. The research proposes a logistic regression model for assessing how enterprises' ability to implement technological innovation is affected by the presence of FDI enterprises as well as other factors that show the change through the indirect influence of FDI such as the size of the enterprise, the type of enterprise, and the skill level of the labor force or its research and development activities. Five forms of technology innovation are considered: improving production process; product quality improvement; product expansion; expanding business activities into a new field of production; and changing business activities into a new field of production. General Statistics Office of Vietnam provided survey data to collect information from 3,166 enterprises in the manufacturing and processing industry in Hanoi, which were valid for analysis. The results show that all variables of enterprise type, size, R&D, and industry have a positive impact on the selection of one of the innovation forms. Several recommendations are further suggested to take advantage of the positive effects and minimizing the negative effects of FDI for technological innovation of Vietnamese enterprises.

• Journal of Biosystems Engineering
• /
• v.39 no.1
• /
• pp.21-33
• /
• 2014

Background: Significant technological development and changes happened in the tractor industries. Contrariwise, the test procedures of the major standard development organizations (SDO's) remained unchanged or with a little modification over the years, demanding new tractor test standards or improvement of existing ones for tractor performance, safety, and comfort. Purpose: This study focuses on reviewing the research trends regarding performance, safety and comfort evaluation of agricultural tractors. Based on this review, few recommendations were proposed to revise or improve the current test standards. Review: Tractor power take-off power test using the DC electric dynamometer reduced human error in the testing process and increased the accuracy of the test results. GPS signals were used to determine acceleration and converted into torque. High capacity double extended octagonal ring dynamometer has been designed to measure drawbar forces. Numerical optimization methodology has been used to design three-point hitch. Numerous technologies, driving strategies, and transmission characteristics are being considered for reducing emissions of gaseous and particulate pollutants. Engine emission control technology standards need to be revised to meet the exhaust regulations for agricultural tractors. Finite Element Analysis (FEA) program has been used to design Roll-Over Protective Structures (ROPS). Program and methodology has been presented for testing tractor brake systems. Whole-body vibration emission levels have been found to be very dependent upon the nature of field operation performed, and the test track techniques required development/adaptation to improve their suitability during standardized assessment. Emphasizes should be given to improve visibility and thermal environment inside the cab for tractor operator. Tractors need to be evaluated under electromagnetic compatibility test conditions due to large growing of electronic devices. Research trends reviewed in this paper can be considered for possible revision or improvement of tractor performance, safety, and comfort test standards.