• Journal of the Korean Society of Safety
• /
• v.35 no.2
• /
• pp.100-110
• /
• 2020

Recently, the frequency of typhoon and torrential rain due to climate change is increasing. In addition, the upsurge in the complexity of urban sewer network and impervious surfaces area aggravates the inland flooding damage. In response to these worsening situations, the central and local governments are conducting R&D tasks related to predict and mitigate the flood risk. Researches on the analysis of inundation in urban areas have been implemented through various ways, and the common features were to evaluate the accuracy and justification of the model by comparing the model results with the actual inundation data. However, the evaluation procesure using available urban flooding data are not consistent, and if there are no quantitative urban inundation data, verification has to be performed by using press releases, public complaints, or photos of inundation occurring through 'CCTV'. Because theses materials are not quantitative, there is a problem of low reliability. Therefore, this study intends to develop a comparative analysis procedure on the quantitative degree and applicability of the verifiable inundation data, and a systematic framework for the performance assessment of urban flood analysis model was proposed. This would contribute to the standardization of the evaluation and verification procedure for urban flooding modelling.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.4
• /
• pp.432-438
• /
• 2015

This study examined the antimicrobial, antioxidant, and tyrosinase inhibitory activities of bioactive compounds extracted from two starfish, Asterina pectinifera and Asterias amurensis, using solvent extraction after $Protamex^{TM}$ hydrolysis. Methanol and acetone fractions collected by stepwise extraction from specimens were subjected to silica gel column chromatography (SGCC) (200 mesh and 400 mesh), followed by high-performance liquid chromatography (HPLC). Two fractions (7:3 and 5:5 chloroform : methanol ratio, v/v) eluted using silica gel column chromatography from the two starfishes showed higher antimicrobial activity against Propionibacterium acnes and dermatophyte fungi (Epidermophyton floccosum, Microsporum audouinii, Trichophyton ferrugineum, Trichophyton mentagrophytes, and Trichophyton rubrum), antioxidant activity ($EDA_{50}$, mg/mL), and tyrosinase inhibitory activity compared to the other fractions. The final fractions obtained from Asterina pectinifera (RT 7.53, 8.93, and 10.48 min) and Asterias amurensis (RT 5.02 min) by SGCC (400 mesh) and HPLC from two SGCC fractions (200 mesh) showed 8.94 and 15.59 mg/mL antioxidant activity ($EDA_{50}$) and 46.89 and 40.19 % tyrosinase inhibitory activity, respectively. Extracts from starfishes are potential cosmetic basic material.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.32 no.1
• /
• pp.41-48
• /
• 2016

Mealworms, Tenebrio molitor (Coleoptera: Tenebrionidae), are widely used as food sourcefor animal rearing as well as human diet. Conventionally, mealworms raised on wheat bran. In this study, we investigated the effects of brewer's spent grain (BSG) on the growth of mealworm larvae to reduce the rearing cost. We prepared five different diets with various BSG content, 0, 10, 30, 50, and 70% of heated air dried BSG with wheat bran. We compared survivorship, larval weight, developmental duration, pupation rate, and pupal weight of five different groups of T. molitor raised on these five diets. The larval survivorships were almost similar with the control group except a group with 70% of BSG. For the larval weight, groups with 30% and 50% of BSG gained more weight than that with control treatment, 0% of BSG. For the developmental period, the groups with 30% of BSG took less time compared to the control group. In all treatment groups, more than 90% of pupation rate were observed. Especially, the group with 30% of BSG showed highest pupation rate among the five groups. Wheat bran with 30~50% of BSG was the optimal diet for successive insect rearing among the five diet treatments. Based on this study, we concluded that adding BSG to wheat bran helps to improve the quality of T. molitor and to reduce the rearing period.

• Food Science of Animal Resources
• /
• v.36 no.4
• /
• pp.516-522
• /
• 2016

Goat milk is highly nutritious and is consumed in many countries, but the development of functional foods from goat milk has been slow compared to that for other types of milk. The aim of this study was to develop a goat milk protein hydrolysate (GMPH) with enhanced digestibility and better hypoallergenic properties in comparison with other protein sources such as ovalbumin and soy protein. Goat milk protein was digested with four commercial food-grade proteases (separately) under various conditions to achieve the best hydrolysis of α_s -casein and β-lactoglobulin. It was shown that treatment with alcalase (0.4%, 60℃ for 30 min) effectively degraded these two proteins, as determined by SDS-PAGE, measurement of nonprotein nitrogen content, and reverse-phase high-performance liquid chromatography. Hydrolysis with alcalase resulted in a significant decrease in β-lactoglobulin concentration (almost to nil) and a ~40% reduction in the level of α_s-casein. Quantification of histamine and TNF-α released from HMC-1 cells (human mast cell line) showed that the GMPH did not induce an allergic response when compared to the control. Hence, the GMPH may be useful for development of novel foods for infants, the elderly, and convalescent patients, to replace cow milk.

• Journal of the Korean Chemical Society
• /
• v.46 no.6
• /
• pp.528-534
• /
• 2002

We have studied to find the optimum electrolyte that satisfied high ionic conductivity, large elec-trochemical window, etc in Li-ion battery. And also studied were the effect of a passive film on carbon anode surface,which is formed by solvent decomposition during the initial charge process. Electrochemical properties of the passive film formed on carbon anode surface investigated and explained as the volumetric ratio of the mixed solvents. The results of scanning electron microscopy, chronopotentiometry, cyclic voltammetry, impedance spectroscopy revealed that the electrochemical properties of the passive film were varied with the ionic conductivity of the electrolyte including the mixed solvents.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.450-458
• /
• 2017

This paper presents dynamic modelling and simulation study on attitude/altitude control of an insect-mimicking flapping micro aerial vehicle during hovering. Mathematical modelling consists of three parts: simplified flapping kinematics, flapping-wing aerodynamics, and six degree of freedom dynamics. Attitude stabilization is accomplished through linear quadratic regulator based on the linearized model of the time-varying nonlinear system, and altitude control is designed in the outer loop using PID control. The performance of the proposed controller is verified through numerical simulation where attitude stabilization and altitude control is done for hovering. In addition, it is confirmed that the attitude channel by periodic control is marginally stable against periodic pitching moment caused by flapping.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.220-224
• /
• 2014

The tire tread is contacted with road surface directly. It gives significant effect on the breaking conditions, traction, noise and so on. The tread having grooves with complex geometry is molded by shaping process. The flow behavior of tread rubber in a mold affects the quality of the tread and it leads to the running performance of automobile. In this study, the flow behavior of rubber in shaping process has been investigated by computer simulation. The objective of flow simulation is the design of tread shape based on the contact of rubber on the mold surface and flow behavior of rubber. Different sequences of contact of rubber on the mold surface and flow behavior of rubber are observed according to the shape of tread on the mold surface. It was verified that the shape of tread gives significant effect on the flow behavior of rubber. Different flow behaviors of rubber and sequential contact of rubber to the mold surface were observed according to the shape of tread on the mold surface. Therefore, we have identified that the shape of tread give a change in the flow behavior of rubber.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.31-41
• /
• 2006

Internet access from mobile phones over cellular networks suffer from severe bandwidth limitations and high bit error rates over wireless access links. Tailoring TCP connections to best fit the characteristics of this bottleneck link is thus very important for overall performance improvement. In this work, we propose a simple algorithm in deciding the optimal TCP segment size to maximize the utilization of the bottleneck wireless TCP connection for mobile contents server access, taking the dynamic TCP window variation into account. The proposed algorithm can be used when the product of the access rate and the propagation time is not large. With some numerical examples, it is shown that the optimal TCP segment size becomes a constant value when the TCP window size exceeds a threshold. One can set the maximum segment size of a wireless TCP connection to this optimal segment size for mobile contents server access for maximum efficiency on the expensive wireless link.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.32 no.2
• /
• pp.69-79
• /
• 2016

Distillers dried grain (DDG) and makgeolli spent grain (MSG) are agricultural byproducts to produce alcoholic beverage. However, they are known to contain enough nutrients. Mealworm is a promising insect resource for an animal feed ingredient as well as alternative human food. With low cost, DDG and MSG were investigated as a feed ingredient for rearing high quality mealworms. DDG and MSG were mixed with wheat bran and compared to control feed (only wheat bran) for its effects on larval survivorship, larval weight, duration for developmental period, pupation rate, and pupal weight. When DDG added, larval survivorship was reduced to 50~70% compared to the control group. Larvae fed on DDG were heavier from third to sixth week. Especially, larvae with 50% DDG were 28% heavier than the control group at the third week. For the larval period, the 50% DDG group was 11% less than that for the control. The pupal weight for the 30% DDG group was 7% heavier than that for the control group. Pupation rates for all the DDG groups were higher than 90%. When compared to the control, larval survivorship for the 70% MSG group was low, but the 50% and 70% MSG groups were high during the seventh and eighth weeks because of delayed development. After the eighth week, larvae with 70% MSG showed the highest larval weight increase as 9~18% compared to the control group. Except 70% MSG group, all of MSG groups showed more than 90% pupation rates. We confirmed that adding 30~50% of DDG or MSG to conventional wheat bran have a strong potential to replace the conventional wheat bran insect feed for quality insect production.

• Fire Science and Engineering
• /
• v.31 no.4
• /
• pp.43-51
• /
• 2017

In this study, new design fire curves were suggested for the utilization in fire simulations. Numerical simulations with the Fire Dynamics Simulator (FDS) were performed for the n-octane and n-heptane pool fires in the ISO 9705 compartment to evaluate the prediction performance of the previous quadratic, exponential design fire curves and newly suggested ones. The numerical results were compared with the experimental temperature and concentrations of $O_2$ and $CO_2$. The numerical results with the previous quadratic and exponential curves showed slow increase and decrease trend than experiments. However, the numerical results with the newly suggested 2 design fire curves showed more similar variation trend in temperature, $O_2$ and $CO_2$ concentrations than the quadratic and exponential curves. It was found that the newly suggested design fire curves can be possibly used in the numerical simulation of fires in a practical respect.