• 한국안전학회지
• /
• 제27권6호
• /
• pp.64-69
• /
• 2012

The purpose of this study is to suggest new safety technical standards to improve the safety in the incineration process. Firstly, we analyzed the major accidents occurred in the incineration process since 1996 and proposed 4 articles which is required to be added newly to the existing KOSHA GUIDE. Secondly, we also performed the HAZOP study for each study node and also suggested 3 articles. Finally, we analyzed recommendations commented for PSM reports which have been submitted from the enterprise located in Honam province since 2005 and proposed 2 articles as well. We understand that all 9 articles proposed above, should be added to the KOSHA GUIDE in order to improve the safety in the incineration process and to prevent the major fire and explosion accidents in the design stage.

• 한국산업보건학회지
• /
• 제30권4호
• /
• pp.394-404
• /
• 2020

Objectives: The aims of this study are to derive the characteristics of diesel exhaust gas emissions generated during vehicle checking in the garage of fire stations and of the related improvement plans for proper air quality management. Methods: The researcher measured changes in the air quality inside garages according to the operating conditions of the exhaust facility and before and after vehicle checking at three fire stations. Results: During the checking of fire engines, a large volume of hazardous substances exceeding management standards were generated, and improvement of the discharge facilities was required for proper air quality management. Conclusions: It is necessary to study the hazard evaluation of firefighters' exposure to exhaust gas, to operate exhaust gas ventilation facilities, and to prepare technical standards for proper indoor air quality management.

• 한국산업보건학회지
• /
• 제23권4호
• /
• pp.384-392
• /
• 2013

Objective: This study inspected incident cases, legal control levels, and GHS(Globally Harmonized System of Classification and Labeling of Chemicals) classification results of strong acids such as hydrogen fluoride, hydrogen chloride, nitric acid, and sulfuric acid, which have been responsible for many recent chemical accidents. As a result, it is deemed necessary for legal control levels of these strong acids to be revised and GHS classification be managed nation-wide. Methods: This study inspected incident cases and legal control levels for strong acids such as hydrogen fluoride, hydrogen chloride, nitric acid, and sulfuric acid. The study analyzed and compared chemical information status and GHS classification results. Results: There were 76 domestic incidents involving strongly acidic hazardous materials over the five years between 2007 and 2011. They include 37 leakage incidents(46.7%) within a workplace, 30 leakage incidents(39.5%) during transportation, and nine leakage incidents(13.8%) following an explosion. The strongly acidic materials in question are defined and controlled as toxic chemicals according to the classes of Substances Requiring Preparation for Accidents, Managed Hazardous Substance, Hazardous Chemical(corrosive) as set forth under the Enforcement Decree of the Toxic Chemicals Control Act and Rules on Occupational Safety and Health Standards of Occupational Safety and Health Act. Among them, nitric acid is solely controlled as a class 6 hazardous material, oxidizing liquid, under the Hazardous Chemicals Control Act. The classification results of the EU ECHA(European Chemicals Agency) CLP(Commission Regulation(EC) No. 790/2009 of 10 August 2009, for the purposes of its adaptation to technical and scientific progress, Regulation(EC) No 1272/2008 of the European Parliament and of the Council on classification, labeling and packaging of substances and mixtures) and NIER (National Institute of Environmental Research) are almost identical for the three chemicals, with the exception of sulfuric acid. Much of the classification information of NITE (National Institute of Technology and Evaluation) and KOSHA(Korea Occupational Safety and Health Agency, KOSHA) is the same. NIER provides 12(41.4%) out of 29 classifications, as does KOSHA.

• 한국산업보건학회지
• /
• 제31권4호
• /
• pp.521-530
• /
• 2021

Objectives: This was to examine and explore the elements of Size Korea 6th 3D head anthropometric database and to provide basic information for the selection of respirators in Korea. Methods: This was a pilot study for the first year of work in a two-year-project initiated at KOSHA in 2021. 3D head dimensions data were obtained from the Size Korea Center managing the Size Korea 6th 3D national anthropometry survey databases. The 3D head dimensions data, including 45 dimensions, were used in line with ISO standards (e.g., ISO/TS 16976-2) for examinations, comparisons, statistical analyses, etc. Results: A total of 3,088 subjects were finally determined in this study. The main features were: Male subjects were 52.5%; the highest age group was 15-29 at 36.7%; unhealthy weight group based on BMI was 31.7%; and survey area was the capital region. For the 6th 3D head dimensions data with 45 items, the means and standard deviations for 'Face length' were 115.9±7.5 cm for males and 107.3±6.9 cm for females respectively while those for 'Face width' item were not available since there was no such item in the data. Numerous findings were discussed accordingly. Conclusions: This study showed that there were likely requirements for improvements in the 6th 3D head anthropometric data as follows: Standardization of Korean and English terms; addition of head dimensions items missed in the Size Korea survey; and reliability of generalizability for subjects, suggesting that the study results can be used for further studies or improvement of respirator selection in Korea.

• Journal of Radiation Protection and Research
• /
• 제45권2호
• /
• pp.88-94
• /
• 2020

Background: The International Commission on Radiological Protection (ICRP) has recently published report series on the occupational intakes of radionuclides (OIR) for internal dosimetry of radiation workers. In this study, the optimized monitoring program including the monitoring interval and the minimum detectable activity (MDA) of major radionuclides was suggested to perform the routine individual monitoring of internal exposure based on the ICRP OIR. Materials and Methods: The derived recording levels and the critical monitoring quantities were reviewed from international standards or guidelines by the International Atomic Energy Agency (IAEA), the International Organization for Standardization (ISO), and the European Radiation Dosimetry Group (EURADOS). The OIR data viewer provided by ICRP was used to evaluate the monitoring intervals and the MDA, which are derived from the reference bioassay functions and the dose coefficients. Results and Discussion: The optimal monitoring intervals were determined taking account of two requirement conditions on the potential intake underestimation and the MDA values. The MDA requirement values of the selected radionuclides were calculated based on the committed effective dose from 0.1 mSv to 5 mSv. The optimized routine individual monitoring program was suggested including the optimal monitoring intervals and the MDA requirements. The optimal MDA values were evaluated based on the committed effective dose of 0.1 mSv. However, the MDA can be adjusted considering the practical operation of the routine individual monitoring program in the nuclear facilities. Conclusion: The monitoring intervals and the MDA as crucial factors for the routine monitoring were described to suggest the optimized routine individual monitoring program of the occupational intakes. Further study on the alpha/beta-emitting radionuclides as well as short lived gamma-emitting nuclides will be necessary in the future.

• 한국안전학회지
• /
• 제36권4호
• /
• pp.37-46
• /
• 2021

According to the Korean Statistical Information Service, the number of fatal occupational accidents per 100,000 workers is the highest in Korea, among all the OECD countries. The safety of construction workers is managed by the construction technology promotion act (CTPA) and the occupational safety and health act (OHSA). A review of the current safety management laws is required to improve them for the construction industry, where the numbers of accidents and deaths are constantly increasing. Accordingly, the aim of this study was to identify the problems in unclear business areas through comparison and analysis of the CTPA and OHSA guidelines and establish effective site-dependent construction safety management plans. The overlapping safety and health management terms and tasks of organizations were derived along with identifying the overlapping items of the safety management and hazard and risk prevention plans. Based on these results, several improvements for the design stage, safety cost, and safety education have been suggested in this paper. In addition, an improved model based on the integration and an optimized compromise between these two laws for safety management in areas where many accidents have occurred in recent years has been reported here.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.2079-2087
• /
• 2017

As the number of tall buildings is increasing, the high-speed lift is necessary in the modern world. Therefore, the further considerations for associated safety devices of lifts were required by the International Standards. In order to stop the moving of cage and keep it, the lifts have to be provided with means that can detect the unintended car movement. Therefore, the International Standard Safety Rules for the construction and installation of lifts had been revised. This paper describes the operation principles of the Rope Brake to fit the Unintended Car Movement Protection (UCMP) means required by the International Standards. This paper confirmed that the performance of these devices was suitable in the scope of the safety standards. This paper also analyzed that the shocks on working of these devices in a car would be dangerous to each passenger differently. Thus, this paper proposes a new design that the circuit diagram of the Unintended Car Movement Protection systems should be improved from the existing design to solve these internal shock problems. So, it is expected to protect passengers from the internal shocks by working of Rope Brake due to irrelevant factors.

• 한국안전학회지
• /
• 제28권6호
• /
• pp.90-96
• /
• 2013

Since the last 50 years, the terminology 'risk' has been widely used in general and industrial applications, with different meanings. The different definitions of risk can lead to the different risk assessments and risk management process elements, and the misunderstandings. For the reasons, the ISO(International Standard Organization) has recently defined a new risk concept through the publication of IS0 31000:2009. Although the new concept of risk was globally accepted, it seem to be argued in its definition debate. Thus, this paper reviews the definition and meaning of the concept of risk in terms of risk origin, general and industrial applications, related domestic laws and risk management standards published to improve an understanding of risk concept.

• 한국안전학회지
• /
• 제38권3호
• /
• pp.77-84
• /
• 2023

Welding and cutting, which are representative tasks in handling firearms at industrial sites, are the basis for production and maintenance processes across all industries. They are also essential in the root industry. Specifically, they are widely used in the manufacturing industry, including equipment industries such as shipbuilding, automobiles, and chemicals, and subsequent maintenance work and general facility repair. However, such hot work carries a high fire risk owing to sparks scattering and inadequate management, resulting in a high occurrence of accidents. In response, the government and relevant organizations have recently revised the Occupational Safety and Health Act to prevent accidents during hot work. These revisions impose more stringent regulations than before, which are expected to help prevent actual fire accidents. However, whether the fire observer system, which is the core element of the revision, would be practically applied and maintained is unclear. Therefore, this study compared the fire observer system in the revised Occupational Safety and Health Act with those in the laws and systems of developed countries, conducted interviews with safety and health experts to assess the suitability of the new system for fire observer operations, and improvement plans were derived accordingly. Therefore, the laws and systems of developed countries grant more authority to fire observers compared with those of Korea. Moreover, professional training in handling emergency is required. Interviews with safety and health experts revealed that regardless of company size, the same operating standards were applied, and standards for deploying fire observers in various locations were unclear. Furthermore, there was a lack of professional education and training, and the role and authority of fire observers were limited. These findings revealed a problem in this sector. The results of this study are expected to serve as basic data for establishing a practical system for placing fire observers and supplementing laws, guidelines, and systems for preventing fire accidents.

• 한국산업보건학회지
• /
• 제34권1호
• /
• pp.18-25
• /
• 2024

Objectives: The primary aim of this study is to create an Occupational Safety and Health (OSH) guide for high-risk maintenance tasks, specifically one designed for maintenance work (MW) in the electronics industry. Methods: The methodology involved a literature review, field investigations, and discussions. An initial draft of the OSH guide was created and then refined through consultations with experts possessing extensive experience in MW for electronic processes. Results: Specific MW tasks within electronics processing facilities identified as high-risk by the research were selected. A comprehensive OSH guide for these tasks was developed consisting of approximately 11 to 12 components and encompassing about 20-25 pages. Implementing safety and health measures before, during, and after MW is crucial for the protection of maintenance personnel. The guide is enriched with real-case scenarios of industrial accidents and occupational diseases to enhance maintenance workers' comprehension of the OSH principles. For a clearer understanding of and adherence to the safety protocols, the guide incorporates visual aids, including cartoons and photographs. Conclusions: This OSH guide is designed to ensure the protection of workers involved in maintenance activities in the electronics industry. It aligns with global standards set by the International Organization for Standardization (ISO) and Semiconductor Equipment and Material International (SEMI) to ensure a high level of safety and compliance.