• Korean Journal of Medicinal Crop Science
• /
• v.19 no.1
• /
• pp.47-53
• /
• 2011

HACCP methodology was applied in the post-harvest processing and storage of domestic medicinal produces. Particularly in terms of mold and mycotoxin contamination, candidate critical control points (CCP) in the conventional practice in Korean farms were selected and monitored by comparing with on the standard guided processing and storage. When each processing of Angelicae Gigantis Radix were assessed for their safety, the drying steps such as the sun drying or the thermal drying depending on each farm made differences in mold contamination. Moreover, the storage conditions before or after the processing were another critical determinant in the fungal contamination. In other words, storage under $4{\circ}C$ rather than at room temperature was favorable for reducing mold growth in the harvested crops. Occurrence rate of Aflatoxin $B_1 \;(AFB_1)$ in Angelicae Gigantis Radix were 12.8%, but amount of $AFB_1$ in all the collected samples were below 10 ppb regulatory limit allowed in Korea. However, for a few samples of Angelicae Gigantis Radix, still relatively high levels of total amount of the major aflatoxins (aflatoxin $B_1\; +\; B_2\; +\; G_1\; +\; G_2$) were observed around 0.18~49.94 ppb, which is not regulated presently in Korea. It thus can be suggested that post-harvest processing and storage of Korean medicinal crops need further investigation and monitoring to establish the Good Agricultural Practice (GAP), particularly to minimize microbial risk including mold and mycotoxin contamination under the changing climate. Additionally, it is also warranted for new enacting of regulatory limits for total aflatoxins in the medicinal crops.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.685-691
• /
• 2007

In this paper through Honan high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21 cm to 40 cm diminishing to a gentle straight line, distortion of X axis varies 14 cm to 29 cm. Through a revision, the deviation value between the coordinates were 6 mm to 9 mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey (10 cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.287-293
• /
• 2018

It is prerequisite to generate epipolar resampled images by reducing the y-parallax for accurate and efficient processing of satellite stereo images. Minimizing y-parallax requires the accurate sensor modeling that is carried out with ground control points. However, the approach is not feasible over inaccessible areas where control points cannot be easily acquired. For the case, a relative orientation can be utilized only with conjugate points, but its accuracy for satellite sensor should be studied because the sensor has different geometry compared to well-known frame type cameras. Therefore, we carried out the bias-compensation of RPCs (Rational Polynomial Coefficients) without any ground control points to study its precision and effects on the y-parallax in epipolar resampled images. The conjugate points were generated with stereo image matching with outlier removals. RPCs compensation was performed based on the affine and polynomial models. We analyzed the reprojection error of the compensated RPCs and the y-parallax in the resampled images. Experimental result showed one-pixel level of y-parallax for Kompsat-3 stereo data.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.747-754
• /
• 2010

The objective of this study is improve the technology by various testing devices for measuring degree of compaction. The methods for quality control for compaction are very various. But, normally the specifications have provided PBT(Plate Bearing Test) method when inspector tested quality control. In spite of the PBT has a few weak points to reduce process and cost. In order to improve quality control method, analyzed in-situ test results between PBT and other devices.(LWDT and Geogauge).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.273-282
• /
• 2005

A rapidly developed satellite technology is used in comprehensive fields such as spatial data aquisition and applications. Especially a GPS positioning is expected to reinvigorate at the national reference system changes to ITRF (International Terrain Reference Frame). Currently the National Geographic Information Institute (NGII) issues a triangulation point coordinate by separating old and new coordinates and in the year of 2007 it will be scheduled to be changed ITRF. The triangulation point coordinate in Cheju area causes some problems due to the difference original observation and re-observation. Thus in this study a GPS observation is conducted after re-organizing geodetic network based on 1st and 2nd order triangulation in order to check the current triangulation points in Cheju area. After the GPS observation data analysis, stable points were extracted, proposed a geodetic network and its application.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.667-670
• /
• 2005

Ground control points(GCPs) can be extracted from SAR data given precise orbit for DTM generation using optic images and other SAR data. In this study, we extract GCPs from ERS SAR data and SRTM DEM. Although it is very difficult to identify GCPs in ERS SAR image, the geometry of optic image and other SAR data are able to be corrected and more precise DTM can be constructed from stereo optic images. Twenty GCPs were obtained from the ERS SAR data with precise Delft orbit information. After the correction was applied, the mean values of planimetric distance errors of the GCPs were 3.7m, 12.1 and -0.8m with standard deviations of 19.9m, 18.1, and 7.8m in geocentric X, Y, and Z coordinates, respectively. The geometries of SPOT stereo pair were corrected by 13 GCPs, and r.m.s. errors were 405m, 705m and 8.6m in northing, easting and height direction, respectively. And the geometries of RADARS AT stereo pair were corrected by 12 GCPs, and r.m.s. errors were 804m, 7.9m and 6.9m in northing, easting and height direction, respectively. DTMs, through a method of area based matching with pyramid images, were generated by SPOT stereo images and RADARS AT stereo images. Comparison between points of the obtained DTMs and points estimated from a national 1 :5,000 digital map was performed. For DTM by SPOT stereo images, the mean values of distance errors in northing, easting and height direction were respectively -7.6m, 9.6m and -3.1m with standard deviations of 9.1m, 12.0m and 9.1m. For DTM by RADARSAT stereo images, the mean values of distance errors in northing, easting and height direction were respectively -7.6m, 9.6m and -3.1m with standard deviations of 9.1m, 12.0m and 9.1m. These results met the accuracy of DTED level 2

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.3 s.303
• /
• pp.25-32
• /
• 2005

PLC is the most widely utilized among many sorts of existing controller for the design of process control system, and study about a PLC language is performed actively. In this paper, we proposed the method that we increase an output points when increased of the output machine which is going to control it in the FA design that used PLC. Output point is going to be extended with 2-3 points in the state that cannot equip output unit in basic base any more. Then an extension base, a power supply, an extension cable and an output unit must be equipped particularly. Then a cost must be added very much. This paper propose the method which extended an output in a small quantity. We designed the expansion unit that received the points of output unit and decoded the signal and the program module that finally extended output points by encoding and decoding, and we confirmed his feasibility through a experiment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.91-98
• /
• 2016

In order to apply Kriging methods for geostatistics of spatial data, an estimation of spatial coherency functions is required priorly based on the spatial distance between measurement points. In the study, the typical coherency functions, such as semi-variogram, homeogram, and covariance function, were estimated using the national geoid model. The test area consisting of 2°×2° and the Unified Control Points (UCPs) within the area were chosen as sampling measurements of the geoid. Based on the distance between the control points, a total of 100 sampling points were grouped into distinct pairs and assigned into a bin. Empirical values, which were calculated with each of the spatial coherency functions, resulted out as a wave model of a semi-variogram for the best quality of fit. Both of homeogram and covariance functions were better fitted into the exponential model. In the future, the methods of various Kriging and the functions of estimated spatial coherency need to be studied to verify the prediction accuracy and to calculate the Mean Squared Prediction Error (MSPE).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.1
• /
• pp.19-27
• /
• 2014

Kompsat-3 is an optical high-resolution earth observation satellite launched in May 2012. In addition to its 0.7m spatial resolution, Kompsat-3 is capable of in-track stereo acquisition enabling quality Digital Elevation Model(DEM) generation. Typical DEM generation procedure requires accurate control points well-distributed over the entire image region. But we often face difficult situations especially when the area of interests is oversea or inaccessible area. One solution to this is to use existing geospatial data even though they only cover a part of the image. This paper aimed to assess accuracy of DEM from Kompsat-3 with different scenarios including no control point, Rational Polynomial Coefficients(RPC) relative adjustment, and RPC adjustment with control points. Experiments were carried out for Kompsat-3 stereo data in USA. We used Digital Orthophoto Quadrangle(DOQ) and Shuttle Radar Topography Mission(SRTM) as control points sources. The generated DEMs are compared to a LiDAR DEM for accuracy assessment. The test results showed that the relative RPC adjustment significantly improved DEM accuracy without any control point. And comparable DEM could be derived from single control point from DOQ and SRTM, showing 7 meters of mean elevation error.

• Journal of Korean Clinical Nursing Research
• /
• v.18 no.3
• /
• pp.381-390
• /
• 2012

Purpose: This study was conducted to examine the effects of simulation-based infection control training on the ICU nurses' perception, clinical performance, and self-efficacy of infection control. Methods: Thirty-eight nurses were assigned into two groups using a career stratified randomization. In the experimental group, the subjects received a simulation-based infection control training, whereas the control group participated in a conventional lecture-based training. Two weeks after the completion of the training sessions, the participants were evaluated for perception, clinical performance, and self-efficacy regarding the infection control. Results: The experimental group that received simulation-based infection control training showed an improvement in perceiving the infection control compared to that of the control group, but the difference was not statistically significant. In terms of the clinical performance, the experimental group and the control group scored $26.05{\pm}3.22$ and $18.53{\pm}3.37$ points respectively, demonstrating a statistical significance (p<.001). There was no significant difference between the two groups in regards to the self-efficacy. Conclusion: The developed simulation-based infection control training showed positive effects in improving clinical performance of infection control over conventional lecture-based training, confirming that a simulation-based training is an effective method in advancing the practical performance of ICU nurses.