• Bulletin of the Korean Chemical Society
• /
• v.33 no.3
• /
• pp.763-769
• /
• 2012

We investigated the width (N) dependence on the magnetization of N-ZSiC NR with electron and hole doping on the basis of systematic DFT calculations. The critical values of the upper and down critical concentration to give the maximum and zero magnetic moment at edge Si/C atoms by electron/hole doping ($x_{up,e}$, $x_{down,e}$, $x_{up,h}$, and $x_{down,h}$) depend on the width of N-ZSiC NR. Moreover, due to $x_{up,e}\;{\neq}\;x_{up,h}$ and $x_{down,e}\;{\neq}\;x_{down,h}$, the electron and hole doping effect are asymmetry, i.e, the critical electron doping value ($x_{down,e}$) is smaller than the critical hole doping value ($x_{down,h}$) and is almost independent of the width of NZSiC NR though the other critical values of the electron and hole doping that influence the magnetization of N-ZSiC NR depend on the width. It was also found that at $x_{down,e}$ or $x_{down,h}$ doping, the N-ZSiC NR turns into unusual non-magnetic metallic state. The magnetic behavior was discussed based on the band structures and projected density of states (PDOS) under the effect of electron/hole doping.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.362-367
• /
• 1999

We intended to make the activated carbon fibers which could separate, remove and recover the volatile organic compounds of benzene, toluene, acetone and methanol. Changing activation temperature and time, large specific surface area and narrow pore distribution could be obtained. The activated carbon fibers have large adsorption capacity and selectivility for those organic compounds. We characterized the adsorption capability of the activated carbon fibers for benzene, toluene, acetone and methanol by BET specific surface area and pore size and micropore volume measurements. In the result of activation, the maximum value of BET specific surface area of the fibers was $1100\m^2$/g at $800^{\circ}C$ for 60 minutes and $K_2$O was reduced actively in this condition. Their average pore size was 5.8~5.9$\AA$. The activated carbon fibers prepared in this work had high adsorption rate to saturation and the selectibility for the above organic compounds. The adsorbed amount of acetone and methanol(diameter of$ 4.3\AA$ and $4.4\AA$ respectively) which are smaller than micropore diameter in size was 43~49%, which was larger value than benzene and toluene(in the same diameter as $5.9\AA$).

• International Journal of Air-Conditioning and Refrigeration
• /
• v.10 no.1
• /
• pp.50-63
• /
• 2002

The Karman boundary-layer has been numerically investigated for the disturbance wave number, wave velocity, azimuth angle and radius (Reynolds number, Re). The disturbed flow over rotating disk can lead to transition at a much lower Re than that of the well-known Type I instability. This early transition is due to the excitation of the Type II. Presented are the neutral stability results concerning these instabilities by solving newly formulated stability equations with consideration of whole convective terms. When the present numerical results are compared with the previously known results, the value of critical Re corresponding to Type I is moved from ${Re}_{c.1}$=285.3 to 270.2 and the value corresponding to Type II from ${Re}_{c.2}$=69.4 to 36.9, respectively. Also, the corresponding wave number is moved fro)m $k_1$=0.378 to 0.386 for Type I; from $k_2$=0.279 to 0.385 for Type II. For Type II, the upped limit of wave number and azimuth angle is $k_u$=0.5872, $\varepsilon_u$=$-17.5^{\circ}$, while its lower limit is near $k_u$=0, $\varepsilon_u$=$-28.4^{\circ}$. This implies that the disturbances will be relatively fast amplified at small Re and within narrow bands of wave number compared with the previous results.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.17 no.1
• /
• pp.19-28
• /
• 1981

Accuracy of the position fix obtained by navigation with Omega in the capacity of worldwide navigation depends on the predicted propagation correction. The authors observe continuously the phase differences of the A-C pair and the A-E pair from April 17 to October 14, 1980, at Busan(35\ulcorner07'. 9N, 129\ulcorner06'. 3E), and analyze the characteristic of daily variation the relation between the theoretical PPC and the measu red PPC to study the accuracy of the position fix. The results are as follows: 1. The results of fourier's analysis for the theoretical PPC and the measured PPC are positive correlation in the coefficients ao, a2, a3 with A-C pair and in the coefficients aO-a3 with A-E pair, and those PPC are apparent to daily periodicity during all measured time. The initial phase is around to 280\ulcorner with A-C pair and 1800 with A-E pair. 2. Daily variatons of the phase difference tend to decrease and the time width to narrow from April toward July, but these variations are opposed to those from July toward October. 3. Mean value of total errors of the position fix by theoretical PPC is 2.67 miles and its standard deviationis O.90miles. 4. Mean value of total errors of the position fix by the measured PPC is 0.63 miles and its standard deviation is 0.217 miles.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.2 s.63
• /
• pp.53-59
• /
• 2005

The effect of pH on the corrosion characteristics in the dissimilar friction welded zone of IN713LC-SCM440 in the loaded torsional stress was studied. The corrosion experiment was performed for 120 hours on the specimens with five steps of pH. The surface corrosion pattern of the SCM440 area showed global corrosion and narrow pitting, which was caused by galvanic corrosion between friction welded IN713LC and SCM440, but corrosion did not proceeded from the IN713LC area. The average relative electrode potential gradually tends to decrease with the elapse of the immersion time in the acidity area. The average corrosion current also gradually tend to decrease The corrosion rate showed a larger value when the average relative electrode potential was higher and the average relative current was lower. The corrosion rate showed a larger value when the average relative electrode potential was higher in the acidity area, and it showed large when the average relative electrode potential was lower in the alkalinity area.

• Computers and Concrete
• /
• v.21 no.5
• /
• pp.485-493
• /
• 2018

Statistical analysis has found useful application in the design of experiments (DOE) especially optimization of concrete ingredients however, to be able to apply the concept properly using computer aided applications there has to be an upper and lower limits of responses fed to the system. In this study, the production of high-performance steel fiber concrete (HPSFC) at five different fiber addition levels by volume with two aspect ratios of 60 and 83 were studied under two curing methods completely dry cured (DC) and moist cured (MC) conditions. In other words, this study was carried out for those limits based on material properties available in North Cyprus. Specimens utilized were cubes 100 mm size casted and cured for 28 days and tested for compressive strength. Minitab 18 statistical software was utilized for the analysis of results at a 5 per cent level of significance. Experimentally, it was observed that, there was fluctuation in compressive strength results for the two aspect ratios and curing regimes. On the other hand P-value hypothesis evaluation of the response showed that at the stated level of significance, there was a statistically significant difference between dry and moist curing conditions. Upper and lower limit values were proposed for the response to be utilized in DOE for future studies based on these material properties. It was also suggested that for a narrow confidence interval and accuracy of the system, future study should increase the sample size.

• Korean Journal of Materials Research
• /
• v.23 no.6
• /
• pp.322-328
• /
• 2013

The relationship the between electrical properties and surface roughness (Ra) of a wet-etched silicon wafer were studied. Ra was measured by an alpha-step process and atomic force microscopy (AFM) while varying the measuring range $10{\times}10$, $40{\times}40$, and $1000{\times}1000{\mu}m$. The resistivity was measured by assessing the surface resistance using a four-point probe method. The relationship between the resistivity and Ra was explained in terms of the surface roughness. The minimum error value between the experimental and theoretical resistivities was 4.23% when the Ra was in a range of $10{\times}10{\mu}m$ according to AFM measurement. The maximum error value was 14.09% when the Ra was in a range of $40{\times}40{\mu}m$ according to AFM measurement. Thus, the resistivity could be estimated when the Ra was in a narrow range.

• Land and Housing Review
• /
• v.11 no.2
• /
• pp.75-86
• /
• 2020

As the urban regeneration project and the old housing maintenance project are actively progressing in Korea, small-scale building construction is being carried out in downtown areas. Small buildings in the downtown area are constructed on about 4 to 10 floors, and since they are carried out in small units in residential areas, it is difficult to enter large equipment to construct existing piles, and it is more vulnerable to complaints about noise and vibration. in this study, helical piles suitable for urban areas or small sites where it is difficult to enter large equipment, such as noise and vibration. Reliability analysis was performed on the results of the static load tests and dynamic load tests conducted at the LH site and the bearing capacity calculated by the hydrostatic method and the empirical formula (N value). As a result of comparing and analyzing the design formula and the results of static load test and dynamic load tests, the correlation between the design formula of the bored pile (Road bridge design standard) formula using N value and the design formula by the modified Davisson method frequently used by method commonly European helical file practitioners.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.254-260
• /
• 2011

Telemetry link is dynamic communication link that antenna gain and polarization are varying with the movement of the airplane. In this paper we calculated the antenna gain, polarization mismatch using the flight trajectory, motion of the airplane and 3D antenna pattern. And we modeled the multipath environment to the 2-Ray spherical earth reflection geometry, estimated the received signal strength when the narrow beam antenna received the RF signal transmitted from the airplane. Also we performed the flight test and after comparing measured value with the estimated value, we confirmed to almost coincide with each other.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1230-1236
• /
• 2016

This study aims to determine the effect of fly ash with a high replacing ratio of clay on the radiation shielding properties of bricks. Some interaction parameters (mass attenuation coefficients, half value layer, effective atomic number, effective electron density, and absorption efficiency) of clay fly ash bricks were measured with a NaI(Tl) detector at 661.6 keV, 1,173.2 keV, and 1,332.5 keV. For the investigation of their shielding behavior, fly ash bricks were molded using an admixture to clay. A narrow beam transmission geometry condition was used for the measurements. The measured values of these parameters were found in good agreement with the theoretical calculations. The elemental compositions of the clay fly ash bricks were analyzed by using an energy dispersive X-ray fluorescence spectrometer. At selected energies the values of the effective atomic numbers and effective electron densities showed a very modest variation with the composition of the fly ash. This seems to be due to the similarity of their elemental compositions. The obtained results were also compared with concrete, in order to study the effect of fly ash content on the radiation shielding properties of clay fly ash bricks. The clay fly ash bricks showed good shielding properties for moderate energy gamma rays. Therefore, these bricks are feasible and eco-friendly compared with traditional clay bricks used for construction.