• 제목/요약/키워드: Narrow Channel Effect

검색결과 71건 처리시간 0.026초

정상염수(定常塩水)쐐기에 있어서의 계면저항계수(界面低抗係數)의 평가(評價) (Interfacial Friction Factor in Arrested Saline Wedge)

  • 이문옥;무로타 아키라
    • 대한토목학회논문집
    • /
    • 제9권1호
    • /
    • pp.53-62
    • /
    • 1989
  • 점변일차원이층류(漸變一次元二層流)모델로서의 염수(塩水)쐐기형상(形狀)의 계산(計算)을 행함에 있어서 필요(必要)한 계면저항계수(界面低抗係數)의 평가수단(評價手段)에 대(對)하여 논(論)한다. 예(例)를 들면, 폭(幅)이 좁은 실험수로(實驗水路)에서 얻어진 염수(塩水)쐐기의 형상(形狀)에 의해 계면저항계수(界面低抗係數)를 역산(逆算)하는 경우는 실제(實際)의 하천(河川)에서는 무시(無視)할 수 있는 수로(水路)의 측벽(側壁)의 영향(影響)을 보정(補正)하지 않으면 안된다. 본연구(本硏究)에서는 이러한 점(點)을 고려(考慮), 정상(定常) 염수(塩水)쐐기의 형상(形狀) 및 계면저항계수(界面低抗係數)에 미치는 수로(水路)의 측벽(側壁)의 영향(影響)을 밝힌다.

  • PDF

장애물 주위의 비뉴턴 유체의 유동특성에 관한 수치적 연구 (NUMERICAL STUDY ON THE CHARACTERISTICS OF NON-NEWTONIAN FLUID FLOW OVER OBSTACLE)

  • 김형민
    • 한국전산유체공학회지
    • /
    • 제19권4호
    • /
    • pp.61-67
    • /
    • 2014
  • Since the most of the existing non-Newtonian models are not adequate to apply to the lattmce Boltzmann method, it is a challenging task from both the theoretical and the numerical points of view. In this research the hydro-kinetic model was modified and applied to the 3-D moving sphere in the circular channel flow and the characteristics of the shear thinning effect by the HK-model was evaluated and the condition of ${\Gamma}$ in the model was suggested for the stable simulation to generate non-trivial prediction in three dimension strong shear flows. On the wall boundaries of circular channel the curved wall surface treatment with constant velocity condition was applied and the bounceback condition was applied on the sphere wall to simulate the relative motion of the sphere. The condition is adequate at the less blockage than 0.7 but It may need to apply a multi-scale concept of grid refinement at the narrow flow region. to obtain the stable numerical results.

다치 직교 PRS 신호에 대한 잡음과 간섭 및 캐리어 옵셋의 영향 (The Effects of Noise, Interference, and Carrier Offset on Multi-Level QPRS Signals)

  • 이광렬;조성준
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
    • /
    • pp.869-873
    • /
    • 1987
  • In this study, we have examined the multi-level QPRS system in point of error rate, which requires narrow bandwidth and has Little ISI. The generalized error rate equations of multi-level QPRS signal have been derived in the presence of Gaussian noise and co-channel CW interference. And the error rate performance of 9, 49, 225 QPRS system is investigated as parameters of carrier power-to-noise power, carrier power-to -interference power. Also, we have investigated the effect of carrier offset.

  • PDF

$\mu$ SMES 마그네트용 모델 코일의 ?치 특성 (Quench Characteristic of the Model Coil for a $\mu$ SMES Magnet)

  • 김해종;성기철;조전욱;김석환;이언용;권영길;류강식;류경우
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제3권2호
    • /
    • pp.5-9
    • /
    • 2001
  • For the development of a small-sized superconducting magnetic energy storage($\mu$SMES) system we designed, fabricated and tested a model coil consisting of five coils with different features. e.g. winding tensions. bore diameters and materials. cooling channels. The results show that even in the highly pre-stressed small coil the quench currents of the coils are degraded to about 70% of their coils critical current. The quench currents of the coils with natrow cooling channels are two times as high as that of the coil without spacers. The test results also indicate that the usual training effect depends on the winding tensions of the coils according to materials of the bobbin.

  • PDF

TDMA jammer suppression on CDMA overlay

  • 김동구;박형일
    • 한국통신학회논문지
    • /
    • 제21권4호
    • /
    • pp.961-971
    • /
    • 1996
  • The effect of inband TDMA narrow band jammers to DS-CDMA system performance and the suppression techniques are investigated using Monte Carlo simulations. TIA stantard North American Digital Cellular wea used as jammer. Levinson Dubin and conventional recursive least square algorithm were emphasized since these techniques can be implemented with a few DSPs for CDMA application. Two filter structures, i.e., complex suppression filter and real suppression filter in each inphase and quadrature channels, are investigated and their performances are compared. Complex suppression filter with Levinson Durbin algorithm of 20msec updata rate is the most promising with respect to implementation and performance poit of view. Implementation feasibility is discussed and the channel capacity lost by suppression is computed.

  • PDF

잡음이 포함된 여수근해 고해상 에어건 탄성파 탐사자료에 대한 예상 범위에서의 해저면 선정 및 너울영향 보정 사례 (A Case Study of Sea Bottom Detection Within the Expected Range and Swell Effect Correction for the Noisy High-resolution Air-gun Seismic Data Acquired off Yeosu)

  • 이호영
    • 지구물리와물리탐사
    • /
    • 제22권3호
    • /
    • pp.116-131
    • /
    • 2019
  • 고품질의 고해상 해저 탄성파 탐사자료를 얻기 위해서는 해상의 파도가 매우 낮은 환경에서 탐사가 이루어져야 하지만, 약간의 파도가 있는 상태에서 탐사를 수행하는 경우가 많으며 이로 인하여 자료의 품질이 저하된다. 이러한 경우에는 자료처리 과정에서 해저면 신호의 정확한 위치를 파악하여 자동적으로 파도 또는 너울의 영향을 제거함으로써 탄성파 자료의 품질을 향상시킬 수 있다. 그러나 파도의 영향으로 인하여 잡음이 포함되거나 해저면 신호가 약해진 자료에서는 해저면 위치 선정에 오류가 발생하기 쉽다. 이 연구에서는 해저면의 위치를 예상하여 좁은 선정 범위를 설정한 후 이 범위 내에서 해저면의 위치를 선정함으로써 이와 같은 오류를 감소시키는 방법을 사용하였다. 해저면 예상 위치는 다중채널 자료에서 각 채널별로 이전에 선정한 해저면의 위치들을 이용하여 산출하였다. 또한 채널별로 산출한 해저면 예상 위치를 샷모음 내에서 다른 해저면 예상 위치와 비교하여 검증하였다. 이와 같은 방법을 잡음이 포함된 여수근해 8채널 고해상 에어건 탐사자료에 적용한 결과, 해저면 신호 이전의 잡음이나 이후의 강한 반사 신호를 선정하는 오류가 현저하게 감소되었으며, 약 2.5 m의 너울영향을 보정한 고품질의 탄성파 단면도를 제작할 수 있었다.

장거리 공중-지상 채널환경에서 대용량 데이터링크의 수신성능 분석방법 연구 (Research on Performance Analysis for the Long Distance Air-Ground Wideband Common Data Link)

  • 류영재;안재민
    • 한국통신학회논문지
    • /
    • 제42권4호
    • /
    • pp.703-715
    • /
    • 2017
  • 본 논문은 장거리 공중-지상 가시선 링크에서 대용량 영상정보용 데이터링크의 무선채널 특성을 분석하고 공중-지상 채널의 협대역 및 광대역 간섭이 대용량 데이터링크의 수신 신호에 미치는 영향을 수학적으로 분석하는 방법을 제안한다. 제안된 성능분석 방법을 이용하여 통신거리에 따른 수신성능을 분석하였고 지면 반사파의 협대역 및 광대역 간섭에 의해 통신거리가 제한됨을 확인하였다. 또한 수신 안테나를 상향으로 제어하는 방법의 성능분석 결과, 협대역뿐만 아니라 광대역 간섭도 효과적으로 제거함으로써 별도의 등화기를 포함하지 않은 기존 대용량 데이터링크 장비로도 통신거리를 증가시킬 수 있음을 확인하였다.

COMPARISON OF DRYOUT POWER DATA BETWEEN CANFLEX MK-V AND CANFLEX MK-IV BUNDLE STRINGS IN UNCREPT AND CREPT CHANNELS

  • JUN JI SU;LEUNG L.K.H.
    • Nuclear Engineering and Technology
    • /
    • 제37권6호
    • /
    • pp.565-574
    • /
    • 2005
  • The CANFLEX Mk-V bundle is designed to improve upon the critical heat flux (CHF) characteristics of the CANFLEX Mk-IV bundle. The main difference between these two bundles is an increase in bearing pad height of about 0.3 mm in the CANFLEX Mk-IV bundle. This change in bearing pad height leads to an increase in gap flow at the bottom of the bundle, primarily eliminating the localized narrow-gap effect that limits the CHF of the CANFLEX Mk-IV bundle. The objective of this paper is to examine the effects of bearing pad height and pressure tube creep on the sheath-temperature distribution, dryout power, and dryout location, as observed ken full-scale bundle tests, between CANFLEX Mk-IV and Mk-V bundles In uncrept and crept channels. A comparison of surface-temperature differences between the top and bottom elements of the bundles showed that increasing the bearing pad height has led to a more homogeneous enthalpy distribution in subchannels of the bundle. Initial dryout locations of the CANFLEX Mk-V bundle were mainly observed at the mid-spacer plane of either the $10^{th}$ (about $80\%$) or $11^{th}$ ($20\%$) bundle in the 12-bundle string, as compared to the mid-spacer and downstream-button planes for the CANFLEX Mk-IV bundle. Dryout power and boiling-length-average (BLA) CHF values exhibit consistent trends and little scatter with varying flow conditions for both types of CANFLEX bundles in uncrept and crept channels. An increase in pressure tube creep has led to a reduction in dryout power (about $20\%$ far the $3.3\%$ crept channel and $27\%$ for the $5.1\%$ crept channel as compared to dryout powers for the uncrept channel). Increasing the bearing pad height of the CANFLEX bundle has led to an increase in the dryout power. Overall, the dryout power of the CANFLEX Mk-V bundle is 7 to $10\%$ higher than that of the CANFLEX Mk-IV bundle at the inlet temperature range of interest (i.e., between 243 and $290^{\circ}C$).

동일채널 FM 간섭원에 대한 IBAC DAB 시스템의 혼신 보호비 분석 (Analysis on Protection Ratio of IBAC DAB System for Co-Channel FM Interferer)

  • 정영호;박소라;김건;이현;이수인
    • 방송공학회논문지
    • /
    • 제5권2호
    • /
    • pp.199-210
    • /
    • 2000
  • IBAC(In-Band Adjacent-Channel) 디지털 오디오방송(Digital Audio Broadcasting : DAB) 시스템은 기존 아날로그 라디오방송이 서비스되는 FM 대역(88~108 MHz)에서 CD 음질의 다채널 오디오 및 멀티미디어 데이터 서비스 제공을 목표로 하고 있다. 따라서 기존 아날로그 FM 신호와의 간섭에 따른 혼신 보호비 분석은 두 방식간의 양립성 검증 및 신규 DAB 채널 할당을 위해 반드시 수행되어야 한다. 이를 위해 FM 신호가 DAB 신호에 주는 간섭 영향, DAB 신호가 FM 신호에 주는 간섭 영향, DAB 신호가 DAB 신호에 주는 간섭 영향에 대한 분석이 이루어져야 한다. 본 논문에서는 FM 간섭원에 대한 모델링과 다중경로 페이딩 채널 환경을 고려한 컴퓨터 시뮬레이션을 통하여 상기 간섭조건 중에서 동일채널 FM 간섭원에 대한 IBAC DAB 시스템의 혼신 보호비를 분석하였다. IBAC DAB 시스템은 Eureka 147 시스템에 비해 월등히 높은 수신 감도를 가지며, 1/3 정도 적은 신호 대역폭으로 인해 동일채널 FM 간섭원에 대한 혼신 보호비는 비교적 높은 값을 나타내었다.

  • PDF

이산형 분산 분포를 갖는 DWDM 시스템용 광섬유 케이블 (Discrete Dispersion Distributed Fiber Optimcla Cable for DWDM System)

  • 박의돈;이동욱;박혜영;김대원;정윤철;손현;조영기
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제50권10호
    • /
    • pp.522-531
    • /
    • 2001
  • A large dispersion value in optical fiber cable should be maintained to suppress the nonlinear effect induced distortion for the narrow channel spaced DWDM system while small value of dispersion is needed for high bit rate transmission. To meet these two requirement simultaneously, dispersion distribution control method during the cabling process was exploited. And dispersion distribution cable was fabricated by the way of designing alternation sections in single cable piece with standard single mode fiber(SSMF) and newly developed negative dispersion fiber(NDF). It is shown that the discretely dispersion varying cable along the axis keep the same average dispersion value of an entire cable length as that of nonzero dispersion shifted fiber(NZDSF) with 3.6 ps/km/nm while the local dispersion is around 17 ps/km/nm of absolute value. Moreover, the developed cable had good optical and mechanical properties and the feasibility of this cable for practical use was confirmed.

  • PDF