• 제목/요약/키워드: Nanotubes

검색결과 1,989건 처리시간 0.033초

경계윤활 영역에서 다중벽 탄소나노튜브의 윤활 특성 (Tribological Performance of Multi-Walled Carbon Nanotubes in Mineral Oils under Boundary Lubricated Sliding)

  • 백승현;이규선;윤도경;이영제
    • Tribology and Lubricants
    • /
    • 제21권6호
    • /
    • pp.263-267
    • /
    • 2005
  • The tribological performance of multi-walled carbon nanotubes (MWNT) in mineral oils is investigated at ambient temperature. The frictional forces, wear amounts and cycles to scuffing of the oils with nanotubes and without those were measured using the ball-on-disk tester. It was found that there were little differences in the frictional forces and wear amounts of two oils. However, the scuffing times of oils with nanotubes were much longer than those of oils without nanotubes in sliding tests. The nanotubes were very effective on maintaining the oil gap and protecting the surfaces in boundary lubricated sliding.

Fabrication and Properties of Under Gate Field Emitter Array for Back Light Unit in LCD

  • Jung, Yong-Jun;Park, Jae-Hong;Jeong, Jin-Soo;Nam, Joong-Woo;Berdinsky, Alexander S.;Yoo, Ji-Beom;Park, Chong-Yun
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
    • /
    • pp.1530-1533
    • /
    • 2005
  • We investigated under-gate type carbon nanotube field emitter arrays (FEAs) for back light unit (BLU) in liquid crystal display (LCD). Gate oxide was formed by wet etching of ITO coated glass substrate instead of depositing $SiO_2$ on the glass substrate. Wet etching is easer and simpler than depositing and etching of thick gate oxide to isolate the gate metal from cathode electrode in triode. Field emission characteristic s of triode structure were measured. The maximum current density of 92.5 ${\mu}A/cm^2$ was when the gate and anode voltage was 95 and 2500 V, respectively at the anode-cathode spacing of 1500 ${\mu}m$.

  • PDF

The Effect of Catalysts on the Growth Characteristic of Carbon Nanotubes

  • Lee, Tae-Young;Han, Jae-Hee;Choi, Sun-Hong;Yoo, Ji-Beom;Park, Chong-Yun;Jung, Tae-Won;Yu, Se-Gi;Yi, Whi-Kun;Kim, Jong-Min
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2002년도 International Meeting on Information Display
    • /
    • pp.666-669
    • /
    • 2002
  • Vertically aligned carbon nanotubes (CNTs) have been produced using various type of plasma enhanced chemical vapor deposition (PECVD). Catalysts such as Ni, Co, and Fe are used for growth of CNTs. To explain the effect of catalysts on the growth characteristics of CNTs, carbon species of $C_2H_2$ was observed in different catalysts using optical emission spectroscopy (OES) with theoretical calculation on the surface reaction in different catalysts.

  • PDF

Improvement Field Emission Uniformity in Carbon Nanotube Composite using Zinc Nano-Fillers

  • Jeon, Sung-Yun;Park, Jae-Hong;Lee, Jong-Hak;Shin, Jun-Ho;Park, Sung-Min;Prashant, Alegaonkar;Yoo, Ji-Beom
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
    • /
    • pp.772-774
    • /
    • 2007
  • The improvement in the field emission parameters, luminescent uniformity, degradation rate and half life has been observed for the thin-multi wall carbon nanotube (t-MWCNT) composite, after incorporating the Zn nanoparticles. The Zn nanoparticles $(diameter\;{\sim}\;100\;{\pm}15\;nm)$ has been incorporated to synthesize the Zn-t-MWCNT composite.

  • PDF

탄소나노튜브 복합체의 기술동향 (Technical Status of Carbon Nanotubes Composites)

  • 이종일;정희태
    • Korean Chemical Engineering Research
    • /
    • 제46권1호
    • /
    • pp.7-14
    • /
    • 2008
  • 탄소나노튜브는 전기적, 기계적, 열적 특성면에서 모두 탁월한 물성을 나타냄에 따라 복합체 분야에서 가장 이상적인 나노충전재료로 여겨지고 있다. 그에 따라 탄소나노튜브 복합체는 전도성재료, 고강도 경량 특성의 구조재료, 다기능 복합재료 등의 응용에 있어서 그 활용도가 높아지고 있다. 본 총설에서는 탄소나노튜브의 제조방법, 개질, 탄소나노튜브 복합체의 다양한 특성 및 응용 분야에 대한 최근 연구 동향을 설명하고 탄소나노튜브 복합체 상업화에 있어서 앞으로 나아갈 방향에 대하여 다룬다.

Fluorescent Magnetic Silica Nanotubes with High Photostability Prepared by the Conventional Reverse Micro-Emulsion Method

  • Zhang, Yuhai;Son, Sang Jun
    • Bulletin of the Korean Chemical Society
    • /
    • 제33권12호
    • /
    • pp.4165-4168
    • /
    • 2012
  • Magnetic fluorescent silica nanotubes were fabricated using reverse micro-emulsions coupled with conventional sol-gel methods. Anodic aluminum oxide templates were used to separate spatially the magnetic and the fluorescent moieties on individual nanotubes and so prevent quenching of the fluorescence. C18 and fluorescent layers were deposited sequentially on silica. Magnetism was then obtained by the introduction of pre-made magnetic nanoparticles inside the nanotubes. The photo- and chemical stabilities of nanotubes were demonstrated through dye release and photobleaching tests. The produced nanotubes did not show fluorescence quenching upon the addition of the nanoparticles, an advantage over conventional spherical fluorescent magnetic nanoparticles. High photostability of nanotubes, magnetism and biocompatiblily make them potentially useful in bioanalysis.