• Applied Science and Convergence Technology
• /
• 제24권5호
• /
• pp.184-189
• /
• 2015

We report a simple way to enhance the size gradient of an imprinted nanopattern through oxygen plasma etching under a nonuniform magnetic field. A sample substrate was placed next to a magnet, and then a nonuniform magnetic field condition was formed around the sample. Using oxygen plasma etching, a line pattern having an initial width of 273 nm was gradually modified from 248 nm at one end to 182 nm at the other end. Controlling the arrangement of the magnet and sample, we could induce a triangular shape size gradient. We verified that the gradually modified nanopatterns we produced are applicable to continual optical property control, showing a possibility to be utilized for optical components such as gratings and polarizers.

• 한국전기전자재료학회논문지
• /
• 제32권5호
• /
• pp.357-360
• /
• 2019

We demonstrate an alignment technology using an imprinting process on an inorganic NiOx film. The aligned nanopattern was fabricated on a silicon wafer by laser interference lithography. The aligned nano pattern was then imprinted onto the sol-gel driven NiOx film using an imprinting process at an annealing temperature of $150^{\circ}C$. After the imprinting process, parallel grooves had been formed on the NiOx film. Atomic force microscopy and water contact angle measurements were performed to confirm the parallel groove on the NiOx film. The grooves caused liquid crystal alignment through geometric restriction, similar to grooves formed by the rubbing process on polyimide. The liquid crystal cell exhibited a pretilt angle of $0.2^{\circ}$, which demonstrated homogeneous alignment.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2008년도 추계학술발표대회 및 제15회 신소재 심포지엄
• /
• pp.5.1-5.1
• /
• 2008

• 한국광학회지
• /
• 제35권1호
• /
• pp.24-29
• /
• 2024

본 연구에서는 나노패턴된 금속(Ag)-유전체(PDMS) 다층 기반의 쌍곡선 메타구조를 제안하고 영상 소자용 적외선 차단 필터의 성능에 대해 보고한다. 사각형 모양의 Ag 나노 패턴의 크기와 Ag 나노 패턴을 둘러싼 PDMS의 두께를 최적화함으로써, 제안된 IR 차단 필터가 0.70-1.01 ㎛ 파장 대역의 빛을 99% 차단하면서도 가시광 영역에서 94% 이상의 높은 투과율을 나타냄을 보였다. 차단 파장 대역은 쌍곡선 메타구조의 epsilon-near-zero 파장보다 긴 파장 영역에서 시작하여 Ag 나노 패턴에 의한 플라즈모닉 흡수가 강한 지점에서 끝나게 된다. 근적외선 차단 대역보다 긴 파장 영역에서는 수평으로 인접한 Ag 나노패턴들 사이의 플라즈모닉 커플링 효과로 다시 투과도가 증가됨을 알 수 있다. 이러한 메타구조체는 적외선 차단 필터의 성능을 향상시킬 수 있을 뿐만 아니라 공정 단순화를 통해 초박형 제조가 가능하여, 다양한 평면 광학 및 집적광학 부품들에 적용될 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.933-934
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.427-428
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.111-112
• /
• 2008

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.509-509
• /
• 2011

Superhydrophobic surfaces on alloyed steels were fabricated with a non-conventional method of plasma etching and subsequent water immersion procedure. High aspect ratio nanopatterns of nanoflake or nano-needle were created on the steels with various Cr content in its composition. With CF4 plasma treatment in radio-frequence chemical vapor deposition (r.-f. CVD) method, steel surfaces were etched and fluorinated by CF4 plasma, which induced the nanopattern evolution through the water immersion process. It was found that fluorine ion played a role as a catalyst to form nanopatterns in water elucidated with XPS and TEM analysis. The hierarchical patterns in micro- and nano scale leads to superhydrophobic properties on the surfaces by deposition of a hydrophobic coating with a-C:H:Si:O film deposited with a gas precursor of hexamethlydisiloxane (HMDSO) with its lower surface energy of 24.2 mN/m, similar to that of curticular wax covering lotus surfaces. Since this method is based on plasma dry etching & coating, precise patterning of surface texturing would be potential on steel or metal surfaces. Patterned hydrophobic steel surfaces were demonstrated by mimicking the Robinia pseudoacacia or acacia leaf, on which water was collected from the humid air using a patterned hydrophobicity on the steels. It is expected that this facile, non-toxic and fast technique would accelerate the large-scale production of superhydrophobic engineering materials with industrial applications.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.114-114
• /
• 2016

임플란트로 널리 사용되고 있는 타이타늄 금속 표면을 처리하여 골융합 접촉 면적을 증가시키기 위한 다양한 방법들이 사용되고 있다. 본 연구에서는 마이크로 단위의 거칠기가 형성된 표면에 나노패턴화된 나노 거칠기를 전기화학적으로 형성시키는 방식(ENF: Electrochemical Nanopattern Formation)을 소개한다. SLA 표면처리 된 임플란트 표면에 100nm 수준의 나노패턴화된 그릿을 기존의 마이크로 그릿의 손상 없이 고르게 형성시켜 표면적을 극대화 할 수 있다. 이를 임플란트의 새로운 표면처리기술로 응용하기 위하여 기존의 표면처리기술과 비교분석하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.250-250
• /
• 2009

The fabricated the nanostructural patterns on the surface of SiN antireflection layer of polycrystalline Si solar cell using anodic aluminum oxide (AAO) masks in an inductively coupled plasma(ICP) etching process. The AAO nanopattern mask has the hole size of about 70~75nm and lattice constant of 100~120nm. The transferred nano-patterns were observed by the scanning electron microscope (SEM). The voltage of patterned Si solar cell enhanced.