• Membrane and Water Treatment
• /
• 제5권4호
• /
• pp.235-250
• /
• 2014

The impacts of membrane degradation due to chlorine attack on the rejection of inorganic salts and trace organic contaminants by nanofiltration (NF) and reverse osmosis (RO) membranes were investigated in this study. The rejection of trace contaminants was examined at environmentally relevant concentrations. Changes in the membrane surface morphology were observed as a result of chlorine exposure. A small increase in rejection was consistently observed with all four membranes selected in this study after being exposed to a low concentration of hypochlorite (100 ppm). In contrast, a higher concentration of hypochlorite (i.e., 2000 ppm) could be detrimental to the membrane separation capacity. Membranes with severe chlorine impact showed a considerable decrease in rejection over filtration time, possibly due to rearrangement of the polyamide chains under the influence of chlorine degradation and filtration pressure. The reported results indicate that loose NF membranes are more sensitive to chlorine exposure than RO membranes. The impact of hypochlorite exposure (both positive and negative) on rejection is dependent on the strength of the hypochlorite solution and is more significant for the neutral carbamazepine compound than the negatively charged sulfamethoxazole.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권4호
• /
• pp.313-318
• /
• 2006

A two-stage process of nanofiltration and water-splitting electrodialysis was investigated for lactic acid recovery from fermentation broth. In this process, sodium lactate is isolated from fermentation broth in the first stage of nanofiltration by using an NTR-729HF membrane, and then is converted to lactic acid in the second stage by water-splitting electrodialysis. To determine the optimal operating conditions for nanofiltration, the effects of pressure, lactate concentration, pH, and known added impurities were studied. Lactate rejection was less than 5%, magnesium rejection approximated 45%, and calcium rejection was at 40%. In subsequent water-splitting electrodialysis, both the sodium lactate conversion to lactic acid and sodium hydroxide recovery, were about 95%, with a power requirement of $0.9{\sim}1.0\; kWh$ per kg of lactate.

• 멤브레인
• /
• 제29권6호
• /
• pp.348-354
• /
• 2019

최근 유기용매나노분리막(OSN) 기술의 응용분야가 확대되고 있으며 그에 따른 분리막 성능향상이 요구되고 있다. 본 연구에서는 박막복합막 형태의 OSN 분리막을 제조하여 용매의 투과성능을 측정하였다. 먼저 비용매상전이법(NIPS)을 활용하여 한외여과막 지지체를 제조하였고, 지지체의 성능을 최적화하기 위해 고분자(PSf or PES)와 기공형성제(PVP or Pluronic F-127)의 종류 및 조성의 영향을 확인하였다. 지지체 표면에 MPD와 TMC 단량체를 계면중합하여 폴리아미드 박막을 형성하였다. 제막된 박막복합막 OSN 분리막의 용매투과성능과 배제율을 측정하여 평가하였다. OSN 지지체로는 PSf 대비 PES 지지체의 성능이 안정적이었으며 Pluronic F-127보다 PVP를 도프용액에 첨가하였을 때 성능이 더 향상되었다. 기존 TMC-MPD 반응을 활용하여 박막복합막을 제조하였을 때 Acetonitrile 용매의 투과성능이 EtOH보다 월등히 높은 것을 확인할 수 있었다.

• 멤브레인
• /
• 제23권1호
• /
• pp.92-99
• /
• 2013

본 연구는 인쇄회로기판(PCB) 제조 시 에칭공정에서 발생되는 구리이온($Cu^{+2}$)을 고농도로 함유한 황산 폐에칭액을 NF 막분리법을 사용하여 에칭액 회수와 구리이온 처리를 효율적으로 수행하기 위한 NF 막여과 공정의 운전 조건을 설정하기 위한 기본 자료를 확보하는데 있다. 이를 위해 미국 Koch사의 SelRO MPS-34 4040 NF 막을 대상으로 구리이온을 고농도(5~25 g/L)로 함유한 모의 황산 폐에칭액의 회분식(dead-end) 나노여과 실험을 수행하여 투과 플럭스와 구리이온의 총괄 배제도를 측정하였다. 이 결과 황산용액에의 막 보관기간이 길수록, 황산용액의 pH가 낮을수록 황산에 의한 NF 막의 손상이 더 크게 발생하여 순수 투과 플러스가 증가하였다. 황산 폐에칭액의 투과 플럭스는 황산용액 내 구리이온의 농도가 증가할수록 막 표면에의 구리이온 농축(농도분극)의 증가에 따라 감소하였으며, 구리이온의 배제도는 구리이온의 농도가 높을수록, pH가 낮을수록, 황산용액 내의 막 보관기간이 길수록 낮아져 초기 37%에서 최소 15% 수준으로까지 감소하였다.

• 한국미생물·생명공학회지
• /
• 제27권4호
• /
• pp.320-326
• /
• 1999

The effects of operating pressure, lactate concentration, impurities, and pH on solution flux and lactate rejection in nanofiltration were investigated with model sodium lactate solutions (lactate 10~200g/L) as a model system. In the tested range of pressure(80~140 psig), the solution flux was observed to be proportional to the operating pressure and the rejection of lactate increased only slightly with the pressure. Both of the flux and the rejection decreased with lactate concentration, while the recovery rate of lactate increased. The effects of glucose and yeast extract as impurities on lactate rejection were negligible, but the flux decreased significantly with the addition of yeast extract. At low lactate concentrations, the rejection of lactate increased with pH due to the increased repulsion (Donnan exclusion effect) between lactate ions and membrane surface. But, at high lactate concentrations, the donnan effect was observed to be overwhelmed by the effect of sodium ions added to adjust the pH, and the rejection of lactate decreased with pH. When fermentation broth containing about 89g/L of lactate was nanofiltered, the flux and the rejection of lactate were 2.8L/$m^2$h and 5%, respectively at 120psig. Both of them were slightly lower than those with model solutions. The recovery rate was 2.6mol/$m^2$h.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 추계 총회 및 학술발표회
• /
• pp.111-115
• /
• 2002

No Abstract, See Full Text

• Environmental Engineering Research
• /
• 제17권4호
• /
• pp.185-190
• /
• 2012

Rejection characteristics of perchlorate ($ClO_4^-$) were examined for commercially available reverse osmosis (RO) and nanofiltration (NF) membranes. A bench-scale dead-end stirred-cell filtration system was employed to determine the toxic ion rejection and the membrane flux. Model water solutions were used to prepare $ClO_4^-$ solutions (approximately, $1,000{\mu}g/L$) in the presence of background salts (NaCl, $Na_2SO_4$, and $CaCl_2$) at various pH values (3.5, 7, and 9.5) and solution ionic strengths (0.001, 0.01, and 0.01 M NaCl) in the presence of natural organic matter (NOM). Rejection by the membranes increased with increasing solution pH owing to increasingly negative membrane charge. In addition, the rejection of the target ion by the membranes increased with increasing solution ionic strength. The rejection of $ClO_4^-$ was consistently higher for the RO membrane than for the NF membrane and $ClO_4^-$ rejection followed the order $CaCl_2$ < NaCl < $Na_2SO_4$ at conditions of constant pH and ionic strength for both the RO and NF membranes. The possible influence of NOM on $ClO_4^-$ rejection by the membranes was also explored.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 추계 총회 및 학술발표회
• /
• pp.128-131
• /
• 2003

• Membrane and Water Treatment
• /
• 제5권2호
• /
• pp.123-146
• /
• 2014

Safe water has becoming a competitive resource in many parts of the world due to increasing population, prolonged droughts, climate change etc. The development of economical and stable materials and methods for providing the fresh water in adequate amounts is the need of the water industry. Nanomaterials have unique characteristics e.g., large surface areas, size, shape, and dimensions etc. that make them particularly attractive for removing various contaminants from polluted waters. Nanotechnology based multifunctional and highly efficient membrane processes are providing affordable solutions in the new era that do not rely on large infrastructures or centralizes systems. The objective of the current study is to review the possible applications of the membrane based nanomaterials/composites for the removal of various contaminations from polluted waters. The article will briefly overview the availability and practice of different nanomaterials based membranes for removal of bacteria and viruses, organic compounds and inorganic solutes etc. present in surface water, ground water, seawater and/or industrial water. Finally, recommendations are made based on the current practices of nanofiltration membranes in water industry for a stand-alone membrane filtration system in removing various types of contaminants from polluted waters.

• Membrane and Water Treatment
• /
• 제7권3호
• /
• pp.193-207
• /
• 2016

Boron is one of the most problematic inorganic pollutants and is difficult to remove in water. Strict standards have been imposed for boron content in water because of their high toxicity at high concentrations. Technologies using membrane processes such as reverse osmosis (RO) and nanofiltration (NF) have increasingly been employed in many industrial sectors. In this work, removal of boron from model water solutions was investigated using polyamide reverse osmosis and nanofiltration membranes. RO-AG, RO-SG, NF-90 and NF-HL membranes were used to reduce the boron from model water at different operational conditions. To understand the boron separation properties a characterization of the four membranes was performed by determining the pure water permeability, surface charge and molecular weight cut-off. Thereafter, the effect of feed pressure, concentration, ionic strength, nature of ions in solution and pH on the rejection of boron were studied. The rejection of boron can reach up to 90% for the three membranes AG, SG and NF-90 at pH = 11. The Spiegler-Kedem model was applied to experimental results to determine the reflection coefficient of the membrane ${\sigma}$ and the solute permeability $P_s$.