• 제목/요약/키워드: Nanofiltration Membrane

검색결과 192건 처리시간 0.022초

Separation performances of a nanofiltration membrane for chlorides, nitrates and sulfates aqueous solutions

  • Wang, Da-Xin;Su, Meng;Wang, Xiao-Lin
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
    • /
    • pp.155-160
    • /
    • 2004
  • Permeation experiments of a commercial nanofiltration membrane (nominated as ESNA 1) were carried out with aqueous solutions of various single salts, that is, five chlorides (NH$_4$Cl, NaCl, KCl, MgCl$_2$ and $CaCl_2$), three nitrates $(NaNo_3,\;Mg(No_3)_2\;and\;Ca(NO_3)_2)\;and\;three\;sulfates\;((NH_4)_2SO_4,\;Na_2SO_4\;and\;MgSO_4)$. The experimental results showed that (1) the permeate volume flux of the ESNA 1 membrane increased and decreased with the growth of the applied pressure and the feed concentration of salts, respectively. The real rejection of ESNA 1 membrane to most single salts increased with the growth of the permeate volume flux. (2) The reflection coefficients of ESNA 1 membrane to chlorides, nitrates and sulfates are 0.97, 0.96 and 0.99, respectively. The solute permeability of most salts except for magnesium and calcium salts increased with the growth of feed concentration. (3) The sequence of the rejections of ESNA 1 membrane to anions is $R({SO_4}^{2-})>R(CI)>R(NO_3)$ at the same feed concentration. While the sequence of the rejections to cations is cataloged into two cases: $R(Na^+)>R(K^+)>R(Mg^{2+})>R(Ca^{2+})$ at the concentration of 10 mol/$m^3$ and $R(Mg^{2+})>R(Ca^{2+})>R(Na^+)>R(K^+)$ at the concentration of 100 mol/$m^3$. The separation capability of a NF membrane is usually affected by the electrostatic effect and the steric-hindrance effect. In this case, the electrostatic effect is the major factor at low concentration and the steric-hindrance effect is the major factor at high concentration. Both the specific sorption and the hydration also reasonably influenced the separation performance of NF membrane to salts.

  • PDF

Nanofiltration을 이용한 염료폐수처리와 농축특성 (The Characteristics of Treatment and Concentration of Dye Manufacturing Wastewater using Nanofiltration)

  • 변기수;고상열;노수홍;이종철
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1995년도 추계 총회 및 학술발표회
    • /
    • pp.38-40
    • /
    • 1995
  • 분리막공정을 폐수처리에 적용시 적용되는 각 폐수의 특성과 조건에 따라 공정의 안정성 및 경제성에 많은 영향을 받게 된다. 특히 폐수에 대한 농축도는 공정의 경제성과 밀접한 관계를 갖고 있는 중요한 인자이다. 폐수중에 염류 및 난분해성 유기물의 농도가 높을 경우 최종 처리수의 양을 줄이지 않으면 추가로 농축수에 대한 처리비용이 증가하기 때문에 폐수에 대한 분리막의 농축특성을 실험을 통하여 충분히 고려하여야 한다. 난분해성 폐수의 일종인 염료폐수는 고농도의 유기물과 높은 염류를 함유하고 있어 분리막공정을 이용하여 처리시 농축도의 증가와 함께 폐수의 특성변화로 막의 성질을 변화시킬 수도 있다. 더불어 과포화된 무기이온성분에 의하여 막표면에 scale을 유발시킬 수 있으므로 농축에 따른 적절한 무기이온성분의 제거는 농축도를 높이는 중요한 인자라고 볼 수 있다. 본 연구에서는 2가 이온에 대한 선택적 배제가 가능한 nanfiltration계열의 분리막을 이용하여 염료폐수를 대상으로 처리효율, cold crystallization공정을 응용한 농축실험 및 세척효과에 관하여 연구하였다.

  • PDF

염색폐수처리를 위한 막분리공정의 문제점

  • 노수홍;안승호;최광호;민병렬
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1992년도 추계 총회 및 학술발표회
    • /
    • pp.76-76
    • /
    • 1992
  • 본 연구의 목적은 국내 섬유산업에서 문제시되는 염색폐수처리에 막분리공정의 적용가능성과 문제점을 실험실규모와 pilot 규모의 실험을 통하여 규명하는 것이다. 염색폐수는 섬유의 가공공정에 따라 염료, 분산제, 정염제, 반응제 등 다양한 유기물질과 무기염을 함유하며 온도가 10-90$\circ$C로 높은 것이 특징이다. 본 연구에서는 2종류의 Nanofiltration: NF40, XU45; 두종류의 복합막; BW30, SW30HR; 2종류의 Cellulose Acetate 비대칭막의 평막 Sample을 사용하여 합성염색폐수의 배제율과 압력변화에 따른 투과수에 미치는 영향을 조사하였다. 실제 혼합염색폐수의 처리는 2개의 2.5"$\times$ 40" Nanofiltration 모듈을 장착한 Pilot 장치를 염색단지 종합처리장에 설치하여 3개월에 걸쳐 시행하였다. 현재까지 얻어진 실험결과에 의하면 전처리공정의 효율롸를 통해 부유물질에 의한 Fouling을 최소화하고 폐수의 성분분석과 사용된 막의 표면분석을 통한 체계적인 조사가 필요하다. 염색폐수처리에 막분리공정이 기존처리방법과 비교하여 경제성을 가지려면 효율적인 막세척방법을 개발하여 투과율의 감소를 최소화시켜야 한다.

  • PDF

NF막에 의한 다양한 염료용액의 막분리 특성 (Study on the Nanofiltration of Various Dye Solutions)

  • 양정목;김탁현;박철환;김지형;김상용
    • 청정기술
    • /
    • 제10권1호
    • /
    • pp.37-45
    • /
    • 2004
  • 본 연구는 섬유산업에서 많이 사용되고 있는 주요염료인 분산성, 반응성, 산성염료를 대상으로 일반적인 수질오염항목인 COD, T-N, TOC, color, SS, TDS, conductivity 등을 분석하여 각각의 염료용액의 성상을 비교 분석하였고, NF막을 투과시켰을 경우 투과 flux와 배제율이 염료용액 종류에 따라서 어떻게 다른 양상을 나타내는지를 연구하였다. 결과적으로, 염료종류별 화학적 성질 및 구조적인 차이에 의하여 염료용액의 용해도 및 유기물부하 등이 달라짐을 알 수 있었고, 특히, 분산성 염료와 반응성염료는 이들 화학적 성질의 차이가 매우 현격하게 달라서 투과 flux 감소현상과 유기물, color, 부유물 및 용존 고형물, 이온성 물질 등의 배제율이 다른 양상을 보임을 알 수 있었다. 반응성염료 용액은 분산성염료 용액에 비하여 투과 flux는 높지만, TDS의 배제율이 낮은 반면, 분산성염료 용액은 부유성 고형물 농도가 높아 투과 flux가 낮고, 유기물질의 배제율이 낮은 특성을 나타낸다.

  • PDF

다단 나노여과 공정에서 고농도 geosmin 및 2-Methylisoborneol (MIB)의 제거특성 (Rejection property of geosmin and 2-Methylisoborneol (MIB) with high concentration level at multi stage nanofiltration (NF) membrane system)

  • 유영범;최양훈;김동진;권순범;김충환
    • 상하수도학회지
    • /
    • 제28권4호
    • /
    • pp.397-409
    • /
    • 2014
  • Algal problem in drinking water treatment is being gradually increased by causing deterioration of water supplies therefore, especially taste and odor compounds such as geosmin and 2-MIB occur mainly aesthetic problem by its unpleasant effects resulting in the subsequent onset of complaints from drinking water consumer. Recently, geosmin and 2-MIB are detected frequently at abnormally high concentration level. However, conventional water treatment without advanced water treatment processes such as adsorption and oxidation process, cannot remove these two compounds efficiently. Moreover, it is known that the advanced treatment processes i.e. adsorption and oxidation have also several limits to the removal of geosmin and 2-MIB. Therefore, the purpose of this study was not only to evaluate full scale nanofiltration membrane system with $300m^3/day$ of permeate capacity and 90% of recovery on the removal of geosmin and 2-MIB in spiked natural raw water sources at high feed concentration with a range of approximately 500 to 2,500 ng/L, but also to observe rejection property of the compounds within multi stage NF membrane system. Rejection rate of geosmin and 2-MIB by NF membrane process was 96% that is 4% of passage regardless of the feed water concentration which indicates NF membrane system with an operational values suggested in this research can be employed in drinking water treatment plant to control geosmin and 2-MIB of high concentration. But, according to results of regression analysis in this study it is recommended that feed water concentration of geosmin and 2-MIB would not exceed 220 and 300 ng/L respectively which is not to be perceived in drinking tap water. Also it suggests that the removal rate might be depended on an operating conditions such as feed water characteristics and membrane flux. When each stage of NF membrane system was evaluated relatively higher removal rate was observed at the conditions that is lower flux, higher DOC and TDS, i.e., $2^{nd}$ stage NF membrane systems, possibly due to an interaction mechanisms between compounds and cake layer on the membrane surfaces.

알코올성 유기용매 재활용을 위한 나노여과막의 제조와 특성평가 (Preparation and Characterization of Nanofiltration Membrane for Recycling Alcoholic Organic Solvent)

  • 김성헌;임광섭;김지현;고형철;남상용
    • 멤브레인
    • /
    • 제31권3호
    • /
    • pp.228-240
    • /
    • 2021
  • 알코올성 용제를 재활용할 수 있는 목적의 유기용제나노여과막(OSN)을 내용제성이 우수한 폴리벤지다졸 고분자를 이용하여 비용매 유도 상분리법을 이용하여 제조하였다. 제조한 나노여과막의 모폴로지와 투과특성을 조절하기 위하여 도프 용액의 농도와 물과 에탄올의 혼합용액인 응고액의 조성을 변화시키면서 제조하였다. α,α'-dibromo-p-xylene (DBX)을 이용하여 가교한 폴리벤지미다졸 분리막은 유기용제나노여과막으로 사용하기에 충분한 기계적 강도와 내용제성을 갖는 것을 확인하였다. 물로만 이루어진 응고조에서 도프용액의 농도가 20%이상인 분리막을 제조하는 경우에 분자량 696.66 g/mol을 가지는 콩고레드에 대한 제거율은 90% 이상을 나타내었고, 투과도는 5 bar의 압력에서 22.5 LMH/bar를 나타내었다. 응고액 조성에 대한 연구를 통해서 응고액 중의 에탄올 농도가 증가할수록 에탄올의 투과도가 증가하는 것을 확인하였다.

New CPS-PPEES blend membranes for CaCl2 and NaCl rejection

  • Chitrakar, Hegde;Arun, M. Isloor;Mahesh, Padaki;Ahmad, Fauzi Ismail;Lau, W.J.
    • Membrane and Water Treatment
    • /
    • 제3권1호
    • /
    • pp.25-34
    • /
    • 2012
  • Carboxylated polysulfone (CPS), poly (1,4-phenylene ether ethersulfone) (PPEES), membranes were prepared and used for the separation of NaCl and $CaCl_2$, in efficient way with less energy consumption. In this work, nanofiltration and reverse osmosis membranes were employed to the salt rejection behavior of the different salt solutions. The influence of applied pressure (1-12 bar), on the membrane performance was assessed. In CM series of membranes, $CM_1$ showed maximum of 97% water uptake and 36% water swelling, whereas, $CM_4$ showed 75% water uptake and 28% water swelling. In RCM series, $RCM_1$ showed 85% water uptake and 32% water swelling whereas, in $RCM_4$ it was 68% for water uptake and 20% for water swelling. Conclusively reverse osmosis membranes gave better rejection whereas nanofiltration membrane showed enhanced flux. CM1 showed 58% of rejection with 12 L/($m^2$ h) flux and $RCM_1$ showed 55% of rejection with 15 L/($m^2$ h) flux for 0.1 wt.% NaCl solution. Whereas, in 0.1 wt.% $CaCl_2$ solution, membrane $CM_1$ showed 78% of rejection with 12 L/($m^2$ h) flux and $RCM_1$ showed 63% rejection with flux of 9 L/($m^2$ h).

나노여과에 의한 중금속 함유 산성 폐에칭액의 재생(I): 상용 나노여과 막의 산 안정성 평가 (Recycling of Acidic Etching Waste Solution Containing Heavy Metals by Nanofiltration (I): Evaluation of Acid Stability of Commercial Nanofiltration Membranes)

  • 염경호;신화섭;진천덕
    • 멤브레인
    • /
    • 제19권4호
    • /
    • pp.317-323
    • /
    • 2009
  • 본 연구는 전자 및 반도체 산업의 각종 에칭공정에서 발생되는 중금속 함유 산성 폐에칭액을 NF 막분리법을 이용하여 에칭액 회수와 중금속 처리를 효율적으로 수행하기 위한 NF 막공정의 운전조건을 설정하기 위한 기본 자료를 확보하는데 있다. 이를 위해 3가지 종류의 상용 NF 막(General Electric Co. Duraslick NF-4040 막, Dow Co. Filmtec LP-4040 막 및 Koch Co. SelRO MPS-34 4040 막)을 대상으로 $Pb^{+2}$ 중금속을 함유한 모의 질산 폐에칭액의 회분식(dead-end) 막여과 실험을 수행하여 폐에칭액의 투과 플럭스와 $Pb^{+2}$ 중금속 이온의 총괄 배제도를 측정하여 폐에칭액 처리에 우수한 NF 막을 선정하였다. 실험결과 질산용액에의 막 보관기간이 길수록, 질산용액의 pH가 낮을수록 산에 의한 막의 손상이 심해졌으며, 질산에 의한 막의 손상은 SelRO MPS-34 4040 < Duraslick NF-4040 < Filmtec LP-4040 막의 순서로 심하게 일어났다. 또한 질산용액에의 막 보관기간이 길수록, 질산용액의 pH가 낮을수록 $Pb^{+2}$ 이온의 배제도가 낮아졌으며, 배제도 값은 Duraslick NF-4040 막의 경우에는 95% 수준의 초기 배제도 값에서 질산용액에의 4달 보관 후에는 20% 수준으로, SelRO MPS-34 4040 막의 경우에는 초기 85% 수준에서 4달 후 65% 수준으로, Filmtec LP-4040 막의 경우에는 초기 90% 수준에서 4달 후 10% 이하 수준으로까지 감소하였다. 3종류의 상용 NF 막 중 내산성 용도로 개발된 SelRO MPS-34 4040 막이 중금속 함유 산성 폐에칭액의 재생에 가장 적합하였다.

분리막을 이용한 무전해 PCB 도금 폐수의 재활용 (Wastewater Recycling from Electroless Printed Circuit Board Plating Process Using Membranes)

  • 이동훈;김래현;정건용
    • 멤브레인
    • /
    • 제13권1호
    • /
    • pp.9-19
    • /
    • 2003
  • 무전해 PCB 도금 공정 수세액을 분리막으로 처리하여 투과수는 공업용수로 재사용하고 유가금속인 금(Au)을 회수하는 방법에 관하여 연구하였다. 역삼투 분리막 테스트 셀을 이용하여 수세액 처리에 적합한 분리막을 선정하였으며 scale-up을 위한 나권형 모듈 투과 실험을 실시하였다. 먼저, (주)새한에서 생산되는 RO-TL(tap water, low pressure), RO-BL(brackish water, low pressure), RO-normal(for water purifier)막으로 투과실험하였으며 그 중 RO-TL막이 soft etching, 촉매 및 Ni 수세액 처리에 우수한 것으로 판명되었다. 따라서 RO-TL막으로 제작한 나권형 가정용 정수기 모듈로 7bar, $25^{\circ}C$에서 scale-up 실험을 수행하였다. Au수세액의 투과 유속은 약 30 LMH로서 가장 높았으나 Au 제거율이 80% 미만이었다. Pd, Ni 및 soft etching 수세액의 투과유속은 각각 약 22, 17, 10 LMH 정도이며 Pd의 제거율은 85% 이상, Ni 및 Cu 제거율은 97% 이상이었다. 또한 Au, Ni 및 Cu 이온이 함유된 수세액 중 유가금속인 Au를 선택적으로 회수하기 위하여 NF막을 사용하였다. Au수세액 중 Ni 및 Cu 이온은 대부분 제거되었으며 투과액 중에 Au이온이 81.9% 존재하였고 계속하여 RO-TL막으로 Au를 농축 회수하였다. 마지막으로 4"직경의 NF 및 RO-TL 나권형 모듈을 연속적으로 사용하여 Au를 효과적으로 회수할 수 있음을 재확인하였다.인하였다.