• Journal of Environmental Science International
• /
• v.27 no.1
• /
• pp.47-53
• /
• 2018

In this study, high-purity silver nanocolloids were synthesized by an electrolytic reaction, and the effect of temperature on the nanocolloid concentration was analyzed by performing the reaction at $70^{\circ}C$ and $90^{\circ}C$. The antibacterial properties of the thus-synthesized silver nanocolloids were also studied. When the synthesis was performed at $90^{\circ}C$, the concentration of silver nanocolloid increased to 14 mg/L after 5 min, 1756 mg/L after 30 min, and 2147 mg/L after 60 min. The concentration of silver nanocolloid synthesized by electrolytic reaction at $70^{\circ}C$ and $90^{\circ}C$ for 60 min was 1,882 mg/L and 2147 mg/L, respectively. The preferred temperature at which the electrolytic synthesis is performed is $70^{\circ}C$ to obtain high concentrations of 1,000 mg/L or more. The antibacterial performance of the thus-synthesized silver nanocolloids was 99.9% for E. coli and 99.5% for Pseudomonas aeruginosa.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2575-2580
• /
• 2010

We present a method for chemically reducing silver alkylcarbamate complex with hydrazine to synthesize silver nanocolloids in an organic solvent using polyvinylpyrrolidone (PVP) as the stabilizer. To determine the optimal conditions for preparing stable silver colloids of controlled size and shape, the silver 2-ethylhexylcarbamate (Ag-EHCB) complex, PVP, hydrazine, and 2-propanol solvent concentrations in the reaction mixture were varied. The initial colloid has a mean particle diameter of 5-80 nm, and it exhibits an absorption band with various shapes in the UV region with a maximum near 420 nm. UV-vis spectroscopy, TEM, and X-ray diffraction techniques were used to investigate the formation and growth process of the metallic silver nanocolloids.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.6
• /
• pp.1277-1279
• /
• 2008

• Bulletin of the Korean Chemical Society
• /
• v.30 no.11
• /
• pp.2669-2674
• /
• 2009

Controlled reduction of silver alkylcarbamate complexes with hydrogen gas was investigated as a facile synthetic method for high concentrations of silver nanocolloids in organic solvent. Polyvinylpyrrolidone (PVP) was used to stabilize the silver colloids obtained from the chemical reduction. To determine optimum conditions for preparation of the stable and controlled silver colloids with the narrowest particle size and distribution, a large number of experiments were carried out involving variations in the concentrations of the silver 2-ethylhexylcarbamate (Ag-EHCB) complex, PVP, and 2-propanol. The initial colloid had a mean particle diameter between 5$\sim$50 nm, as measured by transmission electron microscopy, and exhibited a sharp absorption band in the UV region with a maximum size near 420 nm. After treatment with a reducing agent, the colloids were characterized by ultraviolet-visible spectroscopy, X-ray diffraction, and high-resolution transmission electron microscopy.

• Advances in nano research
• /
• v.3 no.2
• /
• pp.67-79
• /
• 2015

Air stable nanoparticles were prepared from cobalt sulphate using tetra butyl ammonium bromide as surfactant and sodium borohydride as reductant at room temperature. The cobalt nanocolloids in aqueous medium were found to be efficient catalysts for the degradation of toxic organic dyes. Our present study involves degradation of Methylene Blue and Rhodamine-B using cobalt nanoparticles and easy recovery of the catalyst from the system. The recovered nanoparticles could be recycled several times without loss of catalytic activity. Palladium nanoparticles prepared from palladium chloride and the same surfactant were found to degrade the organic dyes effectively but lose their catalytic activity after recovery. The cause of dye colour discharge by nanocolloids has been assigned based on our experimental findings.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.1
• /
• pp.249-251
• /
• 2008

• Bulletin of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.303-304
• /
• 2008

• Smart Structures and Systems
• /
• v.4 no.5
• /
• pp.531-548
• /
• 2008

Recently, dense sensor instrumentation for structural health monitoring has motivated the need for novel passive wireless sensors that do not require a portable power source, such as batteries. Using a layer-by-layer self-assembly process, nano-structured multifunctional carbon nanotube-based thin film sensors of controlled morphology are fabricated. Through judicious selection of polyelectrolytic constituents, specific sensing transduction mechanisms can be encoded within these homogenous thin films. In this study, the thin films are specifically designed to change electrical properties to strain and pH stimulus. Validation of wireless communications is performed using traditional magnetic coil antennas of various turns for passive RFID (radio frequency identification) applications. Preliminary experimental results shown in this study have identified characteristic frequency and bandwidth changes in tandem with varying strain and pH, respectively. Finally, ongoing research is presented on the use of gold nanocolloids and carbon nanotubes during layer-by-layer assembly to fabricate highly conductive coil antennas for wireless communications.

• Journal of Integrative Natural Science
• /
• v.3 no.4
• /
• pp.197-201
• /
• 2010

Dihydrotetraphenylgermole has been synthesized from the reduction of dichlorotetraphenylgermole with lithiumaluminiumhydride. UV-Vis absorption and photoluminescence was measured by using UV-Vis and fluorescence spectroscopy. Nanoparticles of dihydrotetraphenylsilole were synthesized from the mixture solution of water and THF. Photoluminescence behavior of organogermanium nanoparticle was investigated at various water fractions. Critical fraction of water to form organogermanium nanoparticles was 60%. Photoluminescence intensity of organogermanium nanoparticle was increased as the concentration of organogermanium nanocolloids increased. Photoluminescence efficiency of organogermanium nanoparticle at 90% water fraction increased about 100 times compared to that of molecular state.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1252-1256
• /
• 2010

A polyvinylpyrrolidone (PVP)/Ag nanocomposites was prepared by the simultaneous thermal reduction and radical polymerization route. The in situ synthesis of the Ag/PVP nanocomposites is based on the finding that the silver n-propylcarbamate (Ag-PCB) complex can be directly dissolved in the NVP monomer, and decomposed by only heat treatment in the range of 110 to $130^{\circ}C$ to form silver metal. Silver nanoparticles with a narrow size distribution (5 - 40 nm) were obtained, which were well dispersed in the PVP matrix. A successful synthesis of Ag/PVP nanocomposites then proceeded upon heat treatment as low as $110^{\circ}C$. Moreover, important advantages of the in situ synthesis of Ag/PVP composites include that no additives (e.g. solvent, surface-active agent, or reductant of metallic ions) are used, and that the stable silver nanocolloid solution can be directly prepared in high concentration simply by dissolving the Ag/PVP nanocomposites in water or organic solvent.