• 제목/요약/키워드: Nano-particle solution

검색결과 195건 처리시간 0.031초

수열합성을 이용한 나노분말 합성 및 연료감응태양전지 응용 (Synthesis of Nanopowders by Hydrothermal Method and their Application to Dye-sentisized Solar Cell Materials)

  • 임진영;안정석;안중호
    • 한국분말재료학회지
    • /
    • 제25권4호
    • /
    • pp.309-315
    • /
    • 2018
  • In the present work, we synthesize nano-sized ZnO, $SnO_2$, and $TiO_2$ powders by hydrothermal reaction using metal chlorides. We also examine the energy-storage characteristics of the resulting materials to evaluate the potential application of these powders to dye-sensitized solar cells. The control of processing parameters such as pressure, temperature, and the concentration of aqueous solution results in the formation of a variety of powder morphologies with different sizes. Nano-rod, nano-flower, and spherical powders are easily formed with the present method. Heat treatment after the hydrothermal reaction usually increases the size of the powder. At temperatures above $1000^{\circ}C$, a complete collapse of the shape occurs. With regard to the capacity of DSSC materials, the hydrothermally synthesized $TiO_2$ results in the highest current density of $9.1mA/cm^2$ among the examined oxides. This is attributed to the fine particle size and morphology with large specific surface area.

Phosphate removing by graphene oxide in aqueous solution

  • Jun, Tae-Sung;Park, No-Hyung;So, Dea-Sup;Lee, Joon-Woo;Shim, Kwang Bo;Ham, Heon
    • 한국결정성장학회지
    • /
    • 제23권6호
    • /
    • pp.325-328
    • /
    • 2013
  • Phosphate has been removed in waste water by chemically synthesized graphene oxide. Removing efficiency of phosphate was investigated using phosphate dispersion aqueous solution, and 70 % of phosphate was removed in phosphate dispersion solution by chemically synthesized graphene oxide solution. Removing efficiency of phosphate was increased from 70 % to 80 % with assistant of iron nano-particle in chemically synthesized graphene oxide solution. Phosphate removing capacity was up to 89.37 mg/g at initial phosphate concentration of 100 mg/l and temperature of 303 K. The Freundlich was applied to describe the equilibrium isotherms and the isotherm constants were determined.

Willemite 분말의 저온합성 (Low Temperature Synthesis of Willemite Powder)

  • 손세구;이지현;이정미;김영도
    • 한국세라믹학회지
    • /
    • 제45권7호
    • /
    • pp.401-404
    • /
    • 2008
  • Willemite ($Zn_2SiO_4$) are a wide range of applications such as a phosphor host and an important crystalline phase in glass ceramics, electrical insulators, glazes, and pigments. In this study, Willemite precursors were synthesized with zinc silicate gels from mixture of zinc nitrate solution and various sodium silicate solution by the geopolymer technique. To examine the crystallization behavior, precursors were have been monitored by the XRD. A pure willemite phase was obtained at $900^{\circ}C$. TEM investigations revealed that the sample with 50 nm particle size was obtained via heat-treated at $900^{\circ}C$ for W-3.

STUDIES FOR THE CHARACTER OF THE POROUS SILICA CONTAINING THE NANO-SIZED TIO$_2$, PARTICLE IN THE PORE.

  • Jhun, Hyun-pyo;Kong, Woo-sik;Lee, Kyoung-chul
    • 대한화장품학회지
    • /
    • 제24권3호
    • /
    • pp.59-64
    • /
    • 1998
  • In order to lower porosity of the porous silica, titanium alkoxide solution was filled in the pore of silica in the heating-vacuum condition. The specific surface area of modified samples was decreased effectively from 900 m$^2$/g to 100 m$^2$/g. (The aggregation phenomena in modified samples were improved fairly.) Samples were heated at 600 , and then the titanium alkoxide in the pore was decomposed completely to titanium oxide from TGA-DTA measurement. From SEM result, it was evident that titanium oxide did not coat the surface of the silica. The modified samples were analyzed using SEM, DTA-TGA, BET, and UV-visible spectrometer.

  • PDF

액상환원법(液相還元法)에 의한 백금(白金) 나노분말(粉末) 제조(製造) (Preparation of Nano-sized Pt Powders by Solution-phase Reduction)

  • 김철주;윤호성;조성욱;손정수
    • 자원리싸이클링
    • /
    • 제16권5호
    • /
    • pp.36-40
    • /
    • 2007
  • 백금은 물리화학적 특성에 기인하여 많은 분야에서 중요한 역할을 하고 있으며, 이러한 분야에서는 아주 미세한 백금의 사용을 요구하고 있다. 그러므로 본 연구에서는 액상에서 환원제를 사용하여 백금염을 환원시킴으로서 나노크기의 백금을 제조하는 방법에 대하여 알아보았다. 수용액상에서 C14TABr과 $H_2[PtCl_6]$ 상호작용은 $[C1_4TA]_2[PtCl_6]$의 유기백금염 화합물을 형성한다. 단분산 나노 백금입자를 얻기 위해서는 $C1_4TABr$$H_2[PtCl_6]$ 농도가 각각 cmc와 0.32 mM 이상이 되어야 한다. $H_2[PtCl_6]$와 C14TABr 농도가 증가함에 따라 백금입자 크기가 증가하였으며, 백금입자의 형태는 C14RABr농도 증가에 따라 제어가 가능하였다.

분무열분해 공정에 의한 코발트 산화물 나노 분체 제조에 미치는 노즐 팁 크기의 영향 (Effect of Nozzle Tip Size on the Preparation of Nano-Sized Cobalt Oxide Powder by Spray Pyrolysis Process)

  • 김동희;유재근
    • 자원리싸이클링
    • /
    • 제25권6호
    • /
    • pp.41-49
    • /
    • 2016
  • 본 연구에서는 코발트 염화물($CoCl_2$) 용액을 원료로 하여 분무열분해 반응에 의하여 평균입도 50 nm 이하의 코발트 산화물($Co_3O_4$) 분말을 제조하였으며 원료용액이 분사되는 노즐 팁의 크기 변화에 따른 입자들의 특성 변화를 파악하였다. 노즐 팁의 크기가 1 mm인 경우에는 형성된 대부분의 액적형태는 구형을 이루고 있으며 표면은 매우 치밀한 조직을 나타내고 있음을 알 수 있었다. 최종 형성된 입자들의 평균입도는 20 ~ 30 nm이었다. 노즐 팁의 크기가 2 mm인 경우에는 형성된 액적형태는 일부는 구형을 이루고 있었지만 상당 부분은 심하게 분열된 형태를 나타내고 있었다. 노즐 팁 크기가 5 mm인 경우에는 구형을 이루는 액적형태는 거의 존재하지 않았으며 거의 대부분 심하게 분열된 상태를 나타내고 있었다. 액적형태의 표면조직은 다른 노즐 팁 경우에 비하여 치밀함이 크게 감소하였다. 형성된 입자들의 평균입도는 약 25 nm이었다. 노즐 팁 크기가 1 mm로부터 2 mm 및 3 mm로 증가함에 따라 XRD 피크들의 강도는 거의 변화가 없는 반면 노즐 팁 크기가 5 mm로 증가되는 경우에는 피크의 강도가 현저히 감소하게 되었다. 노즐 팁 크기가 1 mm로부터 2 mm 로 증가함에 따라 입자들의 비표면적은 감소하였으며 5 mm로 증가되는 경우에는 비표면적이 현저히 증가하였다.

평판디스플레이 세정 용 Quartz 메가소닉 시스템 (Quartz Megasonic System for Cleaning Flat Panel Display)

  • 김현세;이양래;임의수
    • 한국정밀공학회지
    • /
    • 제31권12호
    • /
    • pp.1107-1113
    • /
    • 2014
  • In this article, the megasonic cleaning system for cleaning micro/nano particles from flat panel display (FPD) surfaces was developed. A piezoelectric actuator and a waveguide were designed by finite element method (FEM) analysis. The calculated peak frequency value of the quartz waveguide was 1002 kHz, which agreed well with the measured value of 1003 kHz. The average acoustic pressure of the megasonic cleaning system was 43.1 kPa, which is three times greater than that of the conventional type of 13.9 kPa. Particle removal efficiency (PRE) tests were performed, and the cleaning efficiency of the developed system was proven to be 99%. The power consumption of the developed system was 64% lower than that of the commercial system. These results show that the developed megasonic cleaning system can be an effective solution in particle removing from FPD substrate with higher energy efficiency and lower chemical and ultra pure water (UPW) consumption.

TiO2 입자 크기 및 구조가 시멘트 페이스트 광촉매 효과에 미치는 영향 (Influence of TiO2 Particle Size and Structure on its Photocatalytic Effect in Cement Paste)

  • 유준성;서형원;배성철
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2020년도 가을 학술논문 발표대회
    • /
    • pp.85-86
    • /
    • 2020
  • With the increasing importance of environmental issues, the cementitious materials with self-cleaning or photocatalytic properties by introducing TiO2 materials have been gaining a lot of attention. In this work, the influence of TiO2 particle size and structure on its photocatalytic effect in cement paste was investigated. The degradation of methylene blue solution was used as the parameter for evaluating the photocatalytic effect of micro-TiO2 (m-TiO2), nano-TiO2 (n-TiO2), and TiO2 nanotube (TNT). Moreover, the effect of these three TiO2 materials on the cement hydration products was characterized by X-ray diffraction (XRD) and thermgravimetric analysis (TG). According to the results, it can be found that all of the TiO2 materials promoted the formation of hydration products, especially TNT. On the other hand, the m-TiO2 exhibited a better photocatalytic effect compared to other materials.

  • PDF

감마선 조사기술을 이용한 미량원소 비료 나노제제 제조 (Preparation of a Nanosized Micro Element Fertilizer Formulation by using Gamma-irradiation Technique)

  • 박해준;김화정
    • 방사선산업학회지
    • /
    • 제4권4호
    • /
    • pp.347-352
    • /
    • 2010
  • In this study, we addressed a novel nanosized curdlan-silica complex, which is curdlan bound to silica, for the development of a sustain-releasing micro element fertilizer formulation. The complex was obtained as follow steps; First, Curdlan polymer, sodium silicate ($Na_2SiO_3$) and isopropyl alcohol were dissolved in DDW. Next the resultant solution was irradiated by $^{60}Co$ gamma-irradiator (150 TBq of capacity; ACEL, Canada). Then $MgSO_4$ was treated with the resultant solution. The obtained colloidal solution was dried by freeze dryer. Finally, we obtained a novel nanosized curdlan-silica formulation containing $MgSO_4$ from the colloidal solution. The morphology of the complex was characterized by using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The nanosized curdlan-silica complex has a particle size ranging from 20 to 80 nm and high stability. Our results suggested that the nano-complex can be applicable to use in various sustain-releasing formulation for pesticide delivery system (PDS).

초미세입자 제거를 위한 나노세라믹 필터의 성능 평가 (Performance of Nano Ceramic Filter for the Removal of Ultra Fine Particles)

  • 김종원;안영철;이병권;정현재
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.751-756
    • /
    • 2009
  • In the perspective of saving energy in buildings, the high performance of insulation and air tightness for improving the heating and the cooling efficiency, has brought economically positive effects. However, these building energy saving technologies cause the lack of ventilation, which is the direct cause of increasing the indoor contaminants, and is also very harmful to the residents, because they spend over 90% of their time indoors. Therefore, the ventilation is important to keep the indoor environment clean and it can also save the energy consumption. In this study, a HEPA type nano ceramic filter is designed as a passive ventilation system to collect airborne particles and to supply fresh outdoor air. The double layer filter, which has $30{\mu}m$ in diameter at the conditions of 10wt% of concentration and 3kV/cm of the electric intensity, is produced by electrospinning. The filtration coating technology is confirmed in the solution with $SiO_2$ nano particles using polymer nano fibers. Also double layer filters are coated with $SiO_2$ nano particles and finally the porous construction materials are made by sintering in the electric furnace at $200{\sim}1400^{\circ}C$. The efficiency is measured 96.67% at the particle size of $0.31{\mu}m$, which is slightly lower than HEPA filter. However the efficiency is turned out to be sufficient.

  • PDF