• Journal of Microbiology and Biotechnology
• /
• 제33권5호
• /
• pp.698-705
• /
• 2023

Rapid diagnosis of methicillin-resistant Staphylococcus aureus (MRSA) is essential for guiding clinical treatment and preventing the spread of MRSA infections. Herein, we present a simple and rapid MRSA screening test based on the aggregation effect of mannose-binding lectin (MBL)-conjugated gold nanoparticles (AuNP), called the MRSA probe. Recombinant MBL protein is a member of the lectin family and part of the innate immune system. It can recognize wall teichoic acid (WTA) on the membrane of MRSA more specifically than that of methicillin-sensitive Staphylococcus aureus (MSSA) under optimized salt conditions. Thus, the MRSA probe can selectively bind to MRSA, and the aggregation of the probes on the surface of the target bacteria can be detected and analyzed by the naked eye within 5 min. To demonstrate the suitability of the method for real-world application, we tested 40 clinical S. aureus isolates (including 20 MRSA specimens) and recorded a sensitivity of 100%. In conclusion, the MRSA probe-based screening test with its excellent sensitivity has the potential for successful application in the microbiology laboratory.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제33권6호
• /
• pp.694-700
• /
• 2007

It is a gel type high functional toothpaste containing vitamin C, E, propolis extract and the rest of herb with a nanoemulsion state. Vitamin C, E is known as the material with an eminent anti-oxidation effect. Propolis is known as the material with an antimicrobial and anti-inflammatory effect. We have been succeeding in making nanoemulsion of vitamin C, E and propolis through the high pressure homogenizer using stable oil and lecithin and the gel type high functional tooth paste were made from nanoemulsion of vitamin C, E and propolis. We observed the process of wound protecting effect and cure effect for a wound of soft tissue, gingival tissue and mucous membrane showing ulcer and inflammation in oral cavity after applying a gel type high functional toothpaste to patient. As a result, the wound were healed very fast and any side effects were not shown. We confirmed that a gel type high functional toothpaste with nanoemulsion of vitamin C, E and propolis extract has good effect not only for wound healing but also for treatment of ulcer-like lesion in oral cavity. So we report our cases with review of literatures.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권2호
• /
• pp.113-118
• /
• 2008

Temporomandibular joint disorder (TMD) can induce severe pain but, its pathogenic mechanisms remain poorly understood. In this study, we analyzed proteomes of human synovial fluid in the superior joint space in the patients with TMD, which is obtained during the treatment arthrocentesis. We've got this result that one of the spots was consistently down-regulated in synovial fluid of patients with TMD from analysis of protein pattern. Its molecular weight was estimated to be 33 kDa. Synoviolin was identified in our proteomics analysis of LC/MS/MS. This protein was recently reported as one of the proteins that might affect rheumatoid arthritis (RA). Synoviolin that might be associated with RA was detected in synovial fluid of patients with TMD. We can conclude that synoviolin might be involved not only in the pathogenesis of RA but also in TMD. In result, synoviolin might be involved in the pathogenesis of TMD and can be candidates as new therapeutic targets of TMD or early detection biomarkers.

• 폴리머
• /
• 제36권2호
• /
• pp.196-201
• /
• 2012

전기방사는 휘발성 용매에 녹아있는 다양한 물질들을 마이크로 크기의 섬유로 제조하는데 사용되고 있다. 이번 연구에서는 물을 용매로 사용하여 pullulan을 전기 방사하였다. 부드러운 섬유를 얻기 위하여 pullulan 농도와 전압을 최적의 조건으로 설정하였다. Pullulan 농도는 pullulan 용액의 점도와 표면 장력에 큰 영향을 받는다. Bead 형태의 pullulan 전기방사 섬유는 5 wt%이하의 농도에서 얻어진다. Pullulan 용액의 농도가 10 wt%로 유지되고, 전압이 15 kV에 고정되었을 때, pullulan 섬유의 평균 직경은 200 nm로 감소하였다. Pullulan electrospun 섬유는 높은 용해도, 유연성, 부드러움과 강한 접착성을 보여준다.

• 멤브레인
• /
• 제22권1호
• /
• pp.54-61
• /
• 2012

VOCs의 분리 및 회수를 위해 PEI 고분자를 이용하여 상분리법으로 중공사 지지체 분리막을 제조하였고 PDMS 고분자를 코팅하여 PEI-PDMS 중공사 복합막을 제조하였다. 제조된 기체 분리막의 특성을 알아보기 위하여 산소와 질소를 이용하여 순수 기체 투과도를 측정하였으며, xylene, ethyl benzene, toluene, cyclohexane을 이용하여 stage cut과 feed 농도 변화에 따른 투과성능을 측정하였다. 또한 VOCs에 대한 내용매성을 알아보기 위하여 DMA을 이용하여 용매 함침 시간에 따른 stress-strain 특성을 알아보았다. 산소와 질소의 순수 투과도는 각각 63 GPU와 30 GPU를 나타내었고, stage cut이 증가할수록 permeate VOCs 농도는 감소하는 경향을 나타내었다. Recovery efficiency의 경우 permeate 농도와는 반대로 state cut이 증가할수록 증가하는 경향을 나타내었다. DMA 인장 테스트 결과 stress는 11.93 MPa, strain은 13.52%로 측정되었다.

• Advances in nano research
• /
• 제7권6호
• /
• pp.443-457
• /
• 2019

In this investigation, dynamic and bending behaviors of isolated protein microtubules are analyzed. Microtubules (MTs) can be considered as bio-composite structures that are elements of the cytoskeleton in eukaryotic cells and posses considerable roles in cellular activities. They have higher mechanical characteristics such as superior flexibility and stiffness. In the modeling purpose of microtubules according to a hollow beam element, a novel single variable sinusoidal beam model is proposed with the conjunction of modified strain gradient theory. The advantage of this model is found in its new displacement field involving only one unknown as the Euler-Bernoulli beam theory, which is even less than the Timoshenko beam theory. The equations of motion are constructed by considering Hamilton's principle. The obtained results are validated by comparing them with those given based on higher shear deformation beam theory containing a higher number of variables. A parametric investigation is established to examine the impacts of shear deformation, length scale coefficient, aspect ratio and shear modulus ratio on dynamic and bending behaviors of microtubules. It is remarked that when length scale coefficients are almost identical of the outer diameter of MTs, microstructure-dependent behavior becomes more important.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.394-394
• /
• 2009

Water solubility of conjugated polymers may offer many applications. Potential applications of water-soluble conjugated polymers include the polymer light-emitting diode and new materials for nano and micro hollow-capsules, and bio- or chemo-sensors. We synthesized neutral polyfluorenes containing bromo-alkyl groups by the palladium catalyzed Suzuki coupling reaction. Bromo-alkyl side groups in neutral polyfluorenes were quaternized by tri-methyl amine solution. The electrochemical and optical properties of water-soluble conjugated polymers are discussed. This novel synthesized water-soluble conjugated polymers were used as a interfacial dipole layer between active layer and metal cathode in polymer solar cell for enhancement of open-circuit voltage (Voc), which is one of the most critical factors in determining device characteristics. We also investigated the device performance of polymer solar cell with different metal cathode such as Al, Ag, Au and Cu. In polymer solar cell, novel cationic water-soluble conjugated polymers were inserted between active layer and high-work function cathode (Al, Ag, Au and Cu).

• 대한금속재료학회지
• /
• 제50권11호
• /
• pp.829-838
• /
• 2012

The microstructure, chemical composition, and lead isotope ratio of the Buddhist bell of Yongmoon Mountain Sangwonsa temple, which was selected as one of the three great bells of Korea by Japanese historians, were analyzed in order to estimate the origin of the material and the time of casting. The microstructure of the temple bell was composed of a copper matrix phase with ${\alpha}$, a face centered cubit lattice structure, a ${\delta}$ phase with $Cu_{41}$ $(Sn,Ag,Sb)_{11}$ as the chemical structural formula, dispersed lead and $Cu_2S$ particles, and locally agglomerated fine particles. Through analysis of the chemical composition of the bell, a criterion (Pb: 0-3.0 wt%, Sn: 10-15 wt%) for distinguishing the bells of the Shilla dynasty from the bells of the Koryo Chosun dynasty is proposed. Examining the lead isotope ratio of $^{207}Pb/^{206}Pb$ and $^{208}Pb/^{206}Pb$ of the Buddhist bell of Sangwonsa temple proved that the bell was fabricated using raw materials in South Korea, which led to the conclusion that the bell was cast in Korea and the top board of the bell has been damaged by an unknown individual. The criteria of distinguishing the bells from the Shilla dynasty from the bells of the Koryo Chosun dynasty presented for the first time in this research is expected to aid in identifying and estimating the previously unclear production years of other bells.

• 한국결정성장학회지
• /
• 제14권4호
• /
• pp.160-168
• /
• 2004

We investigate the effects of solutal convection on the crystal growth rate in a horizontal configuration for diffusive-convection conditions and purely diffusion conditions achievable in a low gravity environment for a nonlinear thermal gradient. It is concluded that the solutally-driven convection due to the disparity in the molecular weights of the component A $(Hg_2Br_2)$ and B (CO) is stronger than thermally-driven convection for both the nonlinear and the linear thermal profiles, corresponding to $Gr_t= 8.5{\times}10^3,\; Gr_s = 1.05{\times}10^5$. For both solutal and thermal convection processes, the growth rates for the linear thermal profile (conducting walls) are greater than for the nonlinear case. With the temperature humps, there are found to be observed in undersaturation for diffusive-convection processes ranging from $D_{AB}$ = 0.087 to 0.87. For the vertical configurations, the diffusion mode is so much dominated that the growth rate and interfacial distribution is nearly regardless of the gravitational accelerations. Also, the diffusion mode is predominant over the convection for the gravity levels less than 0.1 $g_0$ for the horizontally oriented configuration.

• 한국결정성장학회지
• /
• 제14권6호
• /
• pp.281-289
• /
• 2004

The temperature hump is found to be most efficient in suppressing parasitic nucleation. With the temperature humps, there are found to be observed in undersaturations along the transport path for convective-diffusive processes ranging from $D_{AB}$ = 0.0584 $\textrm{cm}^2$/s to 0.584 $\textrm{cm}^2$/s, axial positions from 0 to 7.5 cm. With decreasing Ar = 5 to 3.5, the temperature difference is increased because of the imposed nonlinear temperature profile but the rate is decreased. For 2 $\leq$ Ar $\leq$ 3.5, the rate is increased with the aspect ratio as well as the temperature difference. Such an occurrence of a critical aspect ratio is likely to be due to the effect of sidewall and much small temperature difference. The rate is decreased exponentially with the aspect ratio for 2 $\leq$ Ar $\leq$ 10. Also, the rate is exponentially decreased with partial pressure of component B, P for 1 $\leq$ P $\leq$ 100 Torr.$ B/ $\leq$ 100 Torr.