• Genomics & Informatics
• /
• 제11권4호
• /
• pp.277-281
• /
• 2013

RNA analysis has become a reliable method of body fluid identification for forensic use. Previously, we developed a combination of four multiplex quantitative PCR (qRT-PCR) probes to discriminate four different body fluids (blood, semen, saliva, and vaginal secretion). While those makers successfully identified most body fluid samples, there were some cases of false positive and negative identification. To improve the accuracy of the identification further, we tried to use multiple markers per body fluid and adopted the NanoString nCounter system instead of a multiplex qRT-PCR system. After measuring tens of RNA markers, we evaluated the accuracy of each marker for body fluid identification. For body fluids, such as blood and semen, each body fluid-specific marker was accurate enough for perfect identification. However, for saliva and vaginal secretion, no single marker was perfect. Thus, we designed a logistic regression model with multiple markers for saliva and vaginal secretion and achieved almost perfect identification. In conclusion, the NanoString nCounter is an efficient platform for measuring multiple RNA markers per body fluid and will be useful for forensic RNA analysis.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.172-172
• /
• 2010

$MgB_2$ doped with $TiO_2$ was prepared by the in-situ solid state reaction to study the effects of $TiO_2$ dopant on the flux pinning behavior of $MgB_2$ superconductor. From the field-cooled and the zero-field-cooled temperature dependences of magnetization, the realms of vortex-glass and vortex-liquid states of $TiO_2$-doped $MgB_2$ were determined in the H-T diagram (the temperature dependence of upper critical magnetic field and irreversibility line). The critical current density was estimated from the width of hysteresis loops in the framework of Beam's model at different temperatures. The results indicate that nano-scale $TiO_2$ inclusions play a role of the effective pinning centers and lead to the enhanced upper critical field and critical current density. It is suggested that the grain-boundary pinning mechanism is realized in $TiO_2$-doped $MgB_2$ superconductor.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.147.1-147.1
• /
• 2008

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.269-270
• /
• 2009

The biased vertical alignment (BVA) liquid crystal (LC) mode shows a has a distinct advantage of lower manufacture cost due to the elimination of a lithographic process step to form either ITO-patterning or protrusions on the color-filter substrates. However, those devices have complex voltage conditions which is the respective induce voltage on common electrode, pixel electrode and bias electrode when positive and negative frame. In order to overcome the complex voltage condition, the pretilt angles is controlled by photo polymerization of the UV-curable reactive mesogen (RM). According to our studies, voltages to the cell are critical to achieve an optimized surface-modified quality BVA (Q-BVA) mode which provides the well defined reorientation of the LCs with respect to an electric field.

• Nutrition Research and Practice
• /
• 제7권4호
• /
• pp.309-314
• /
• 2013

This study was conducted to investigate the relationship among the current status of calcium intake from milk and milk products, physical growth and bone mineral density in 664 male and female middle school and high school students aged 15-17 years. In the study, the current status of calcium intake from milk and milk products was analyzed, and the height, body composition, and bone mineral density of the right heel bone (calcaneus) were measured. The daily calcium intake of milk and milk products was calculated as the 'dairy equivalent of calcium', which is the calcium content in 200 mL of white milk. The cutoffs of tertiles of the dairy equivalent of calcium were calculated and then the subjects were categorized into 3 groups according to the tertiles, Q1 group (lower intake group), Q2 group (middle intake group) and Q3 group (upper intake group). The daily calcium intake of milk and milk products in Q1, Q2 and Q3 groups was 16.2 mg, 99.7 mg, and 284.0 mg, respectively, and the ratio of milk and milk product consumption to the daily total calcium intake was 5.4%, 27.4%, and 49.7%, respectively. The ratio of total calcium intake to the daily recommended intake in study subjects was 30.5% in Q1, 42.3% in Q2, and 60.7% in Q3, with significant differences (P < 0.05). Height, body weight, BMI, and % of body fat in three tertile groups (Q1, Q2 and Q3) were not significantly different. However, the T scores for bone mineral density in female students in three tertile groups (Q1, Q2 and Q3) was significantly different (P < 0.05). The study showed that the intake of milk and milk products in adolescents, particularly in girls, can improve the bone mineral density without increasing body weight, and thus confirmed that milk intake is important in adolescence.

• Transactions on Electrical and Electronic Materials
• /
• 제7권1호
• /
• pp.42-50
• /
• 2006

Co-Fe-Al-O nano-granular thin films with high electrical resistivity, fabricated by radio frequency magnetron sputtering under an $Ar+O_2$ atmosphere, are found to show good soft magnetic properties in the GHz frequency range. The real part value of the relative permeability is 260 at low frequencies and this value is maintained up to the GHz frequency range. A non-integrated type noise filter on a coplanar waveguide transmission line is demonstrated by using the Co-Fe-Al-O nano-granular thin film with the dimensions of $4\;mm(l){\times}4\;mm(w){\times}0.1\;{\mu}m(t)$. The insertion loss is very low being less than 0.3 dB and this low value is maintained up to 2 GHz. At a ferromagnetic resonance frequency of 3.3 GHz, the degree of noise suppression is measured to be 3 dB. This level of noise attenuation is small for real applications, but there is much room for further improvement by increasing the magnetic volume and integrating the magnetic thin film into the CPW transmission line.

• 동력기계공학회지
• /
• 제14권4호
• /
• pp.50-55
• /
• 2010

In order to investigate tribological effects of nano copper particles impregnated(CuN) on surface polytetrafluoroethylene(PTFE) on sealing wear and an experimental study was carried out to determine the wear behavior of copper nano-particles impregnation two kind thickness in super critical $CO_2$ liquid. Experimental results showed that the friction coefficients of CuN PTFE at the low sliding speed(0.44m/s) and the oil temperature ($60^{\circ}C$) were higher than that of virgin PTFE. And a thin nano copper particles impreganated thickness was formed on the surface in the PTFE and the specimen with this treatment has much better friction properties than the original one. Fortunately, at the high load(80 N) and the oil temperature, the friction coefficient of CuN PTFE was lower than that of virgin PTFE. This evidenced the load carrying capacity of CuN PTFE was much better than that of virgin PTFE under the high load condition(80 N) specially. Therefore, it can be concluded that the friction coefficient variation of CuN PTFE is very small but its wear rate decreases greatly with increase in sliding speed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권8호
• /
• pp.1118-1122
• /
• 2004

The study was conducted to evaluate the effect of chromium nanoparticle (CrNano) on growth, carcass characteristics, pork quality, and tissue chromium in finishing pigs. A total of 100 Duroc$\times$Landrace$\times$Yorkshire barrows (average initial BW of 64.78$\pm$0.83 kg) were divided into 10 pens, 10 pigs per pen. 5 pens of pigs were fed with control diet (corn-soybean meal, 1.05% Lys) and others were fed with control diet addition with 200 $\mu$g/kg Chrome (Cr) from CrNano. During the trial, all pigs were given free access to feed and water. After 35 days trial, 10 pigs from each each treatment (weight similar to average group weight, 91.34$\pm$1.31 kg for control group, and 92.26$\times$0.56 kg for CrNano treated group) were sacrificed to measure carcass characteristics, pork quality, and to collect the samples of longissimus muscle, liver, kidney and heart. The results indicated that the addition of 200 $\mu$g/kg CrNano decreased feed: gain ratio by 3.56% (p<0.05) compared to the control group. Pigs fed CrNano had 14.06% higher (p<0.05) carcass lean percentage, 19.96% (p<0.05) larger longissimus muscle area and 25.53% lower (p<0.05) carcass fat percentage, 18.22% lower (p<0.05) backfat thickness. Drip loss in chops from pigs fed CrNano was decreased by 21.48% (p<0.05) and weights of longissimus muscle and semimembranosus were increased by 16.33% (p<0.05) and 14.87% (p<0.05) respectively. In addition, supplemental CrNano resulted in 184.11% (p<0.05), 144.99% (p<0.05), 88.13% (p<0.05) and 52.60% (p<0.05) increment of Cr concentration in longissimus muscle, liver, kidney and heart, respectively. These results suggest that supplemental CrNano has beneficial effects on carcass characteristics, pork quality and individual skeletal muscle weight, increase tissue chromium concentration in selected muscle and organs.

• 열처리공학회지
• /
• 제32권6호
• /
• pp.270-274
• /
• 2019

In this study, simulation structure analysis was performed for the differential gear system for passenger cars as a prerequisite for the design of the balancing module. The differential gear system was modeled by using CATIA and simulation structure analysis was performed using ANSYS software. The material of the modeled differential gear system uses the mechanical properties of S45C (Q&T). In the structural analysis of the differential gear, the areas where the maximum stress and the maximum strain occurred can be identified. The maximum stress and maximum strain occurred in the pitch circle of the bevel gear. In evaluating the safety factor, it was found that sufficient safety factor was secured. Based on the analysis results for the differential gear, it is expected that it will be a good reference if we design the balancing module device.

• 한국재료학회지
• /
• 제22권2호
• /
• pp.61-65
• /
• 2012

A $Li_2O-2SiO_2$ ($LS_2$) glass was investigated as a lithium-ion conducting oxide glass, which is applicable to a fast ionic conductor even at low temperature due to its high mechanical strength and chemical stability. The $Li_2O-2SiO_2$ glass is likely to be broken into small pieces when quenched; thus, it is difficult to fabricate a specifically sized sample. The production of properly sized glass samples is necessary for device applications. In this study, we applied spark plasma sintering (SPS) to fabricate $LS_2$ glass samples which have a particular size as well as high transparency. The sintered samples, $15mm\phi{\times}2mmT$ in size, ($LS_2$-s) were produced by SPS between $480^{\circ}C$ and $500^{\circ}C$ at 45MPa for 3~5mim, after which the thermal and dielectric properties of the $LS_2$-s samples were compared with those of quenched glass ($LS_2$-q) samples. Thermal behavior, crystalline structure, and electrical conductivity of both samples were analyzed by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and an impedance/gain-phase analyzer, respectively. The results showed that the $LS_2$-s had an amorphous structure, like the $LS_2$-q sample, and that both samples took on the lithium disilicate structure after the heat treatment at $800^{\circ}C$. We observed similar dielectric peaks in both of the samples between room temperature and $700^{\circ}C$. The DC activation energies of the $LS_2$-q and $LS_2$-s samples were $0.48{\pm}0.05eV$ and $0.66{\pm}0.04eV$, while the AC activation energies were $0.48{\pm}0.05eV$ and $0.68{\pm}0.04eV$, respectively.