• 한국전기전자재료학회논문지
• /
• 제21권12호
• /
• pp.1083-1089
• /
• 2008

We studied the dielectric characteristics of low-k SiOCH thin films by Ellipsometry. The SiOCH thin films were prepared by deposition of BTMSM precursors on p-Si wafer by CCP-PECVD method. The nano-porous structural organic/inorganic hybrid-type of SiOCH thin films correlated directly to the formation of low dielectrics close to pore(k=1). The structural groups including highly dense pores in SiOCH thin films originated the anisotropic geometry type of network structure directing to complex refractive characteristics of SiOCH single layer on the p-Si wafer. The linearly polarized beam of Xe-ramp in the range from 190 nm to 2100 nm introduced to the surface of SiOCH thin film, and the reflected beam was Elliptically polarized by complex refractive coefficients of SiOCH dipole groups. The amplitude variation $\Psi$ and phase variation $\Delta$ of the relative reflective coefficients between perpendicular and parallel components to the incident plane were measured by Ellipsometry. The complex optical constants n and k as well as the dielectric constant and thickness of SiOCH thin films were driven by the measured value of $\Psi$ and $\Delta$.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.115-120
• /
• 2008

Use of the carbon nanotube is superior to general powder state materials of mechanical and electrical properties. Because its ratio of diameter and length (aspect ratio) is very large, it has been known as a type of ideal nano-reinforcement material. Based on this advantage, the existing carbon black of semiconductive shield materials used in power cables can acquire excellent properties by using a small amount of carbon nanotubes. Thus, we investigated the thermal properties of the carbon nanotube, such as thermal conductivity, specific heat, and DSC (Differential Scanning Calorimetry). We found that a high thermal resistance level is demonstrated by using a small amount of carbon nanotubes. As a result, this tendency confirms high cross-linking density in a new network in which the carbon nanotube between carbon black constitute molecules shows a bond by similar constructive properties.

• Transactions on Electrical and Electronic Materials
• /
• 제6권4호
• /
• pp.135-139
• /
• 2005

In this paper, negative SU-8 photoresist processed at low temperature is characterized in terms of delamination. Based on a $3^3$ factorial designed experiment, 27 samples are fabricated, and the degree of delamination is measured for each. In addition, nine samples are fabricated for the purpose of verification. Employing the. neural network modeling technique, a process model is established, and response surfaces are generated to investigate degree of delamination associated with three process parameters: post exposure bake (PEB) temperature, PEB time, and exposure energy. From the response surfaces generated, two significant parameters associated with delamination are identified, and their effects on delamination are analyzed. Higher PEB temperature at a fixed PEB time results in a greater degree of delamination. In addition, a higher dose of exposure energy lowers the temperature at which the delamination begins and also results in a larger degree of delamination. These results identify acceptable ranges of the three process variables to avoid delamination of SU-8 film, which in turn might lead to potential defects in MEMS device fabrication.

• Advanced Composite Materials
• /
• 제16권4호
• /
• pp.269-282
• /
• 2007

Fully biodegradable high strength composites or 'advanced green composites' were fabricated using yearly renewable soy protein based resins and high strength liquid crystalline cellulose fibers. For comparison, E-glass and aramid ($Kevlar^{(R)}$) fiber reinforced composites were also prepared using the same modified soy protein resins. The modification of soy protein included forming an interpenetrating network-like (IPN-like) resin with mechanical properties comparable to commonly used epoxy resins. The IPN-like soy protein based resin was further reinforced using nano-clay and microfibrillated cellulose. Fiber/resin interfacial shear strength was characterized using microbond method. Tensile and flexural properties of the composites were characterized as per ASTM standards. A comparison of the tensile and flexural properties of the high strength composites made using the three fibers is presented. The results suggest that these green composites have excellent mechanical properties and can be considered for use in primary structural applications. Although significant additional research is needed in this area, it is clear that advanced green composites will some day replace today's advanced composites made using petroleum based fibers and resins. At the end of their life, the fully sustainable 'advanced green composites' can be easily disposed of or composted without harming the environment, in fact, helping it.

• International journal of advanced smart convergence
• /
• 제5권3호
• /
• pp.61-65
• /
• 2016

In the TV broadcasting, movie production and business the transportation of video between creators (programmers, studios) and distributors (broadcast and cable networks, cable and satellites companies) is still a mix of File Transfer Protocol (FTP), physical delivery, and expensive multicast satellite. Cloud-based file sync-and-share providers like Dropbox and box are playing an increasing role, but the industry's unique demands for speed and multicasting have fueled the growth of IP Video transport. This paper gives a solid grasp of the major elements of IP video technology, including content preparation, system architecture alternatives and network performance management.

• Coupled systems mechanics
• /
• 제5권4호
• /
• pp.315-327
• /
• 2016

Undergoing large volumetric changes upon incremental environmental stimulation, hydrogels are interesting materials which hold immense potentials for utilization in a wide array of applications in diverse industries. Owing to the large magnitudes of deformation it undergoes, swelling induced instability is a commonly observed sight in all types of gels. In this work, we investigate the instability of photo-thermal sensitive hydrogels, produced by impregnating light absorbing nano-particles into the polymer network of a temperature sensitive hydrogel, such as PNIPAM. Earlier works have shown that by using lights of different intensities, these hydrogels follow different swelling trends. We investigate the possibility of utilizing this fact for remote switching applications. The analysis is built on a thermodynamic framework of inhomogeneous large deformation of hydrogels and implemented via commercial finite element software, ABAQUS. Various examples of swelling induced instabilities, and its corresponding dependence on light intensity, will be investigated. We show that the instabilities that arise have their morphologies dependent on the light intensity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.562-564
• /
• 2001

Transformation of molecular film occurs only usually in air-water interface, 2 dimensions domain's growth and crash are achieved. Organic matter thin film that accumulate molecular film in archaism board only that consist of growth of domain can understand correct special quality of accumulation film supplying information about fine structure and properties of matter of device observing information and so on that is surface forward player and optic enemy using AFM one of SPM application by nano electronics. The stable images are probably due to a strong interaction between the monolayer film and glass substrate. We are unable to obtain molecule resolution in images of the films but did see a marked contrast between images of the bare substrate and those with the network structure film deposited onto it. Formation that prevent when gas phase state and liquid phase state measure but Could know organic matter that molecules form equal and stable film when molecules were not distributed evenly. and accumulated in solid state only.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1618-1620
• /
• 2002

Transformation of molecular film occurs only usually in air-water interface, 2 dimensions domain's growth and crash are achieved. Organic matter thin film that accumulate molecular film in archaism board only that consist of growth of domain can understand correct special quality of accumulation film supplying information about fine structure and properties of matter of device observing information and so on that is surface forward player and optic enemy using AFM one of SPM application by nano electronics. The stable images are probably due to a strong interaction between the monolayer film and glass substrate. We are unable to obtain molecule resolution in images of the films but did see a marked contrast between images of the bare substrate and those with the network structure film deposited onto it. Formation that prevent when gas phase state and liquid phase state measure but Could know organic matter that molecules form equal and stable film when molecules were not distributed evenly, and accumulated in solid state only.

• 한국콘텐츠학회논문지
• /
• 제2권3호
• /
• pp.127-134
• /
• 2002

나노기술은(NT) 정보기술(IT), 바이오기술(BT), 환경기술(ET)과 함께 국가 핵심 전략기술로 부각되고 있으며, 이들 기술을 지원하는 기반기술로 주목받고 있으며, 또한 나노기술에 관한 정보를 체계적으로 수집, 분류, 가공하고 표준화하며, 이를 데이터베이스로 구축하여 효율적으로 확산 유통 시킬 필요성이 강하게 제기되고 있다. 본 연구에서는 보유정보, 인력, 장비 등 나노기술 관련 정보자원 및 연구전문가들의 컨텐츠 및 정보수요의 현황을 파악하고 이를 연구 분석하였으며 체계적이고 국가적인 나노기술정보의 종합지원 시스템 구축을 위한 방향성을 제시하였다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2006년도 가을 학술발표논문집 Vol.33 No.2 (D)
• /
• pp.6-9
• /
• 2006

IEEE 802.15.4는 저전력 무선 개인 네트워크 기술의 표준으로서 USN(ubiquitous sensor network)의 핵심 무선 통신 기술로 각광을 받고 있다. 그러나 IEEE 802.15.4는 제한된 RF 전송범위와 스타 토폴로지를 기반으로 하는 통신 기법만을 제공하고 있으며, 인접한 PAN 간(inter-PAN)의 통신 기술은 정의되어 있지 않다. 이러한 기술상의 제약으로 IEEE 802.15.4는 통신 영역이 매우 제한적이며, 이에 따라 통신시 음영지역이 발생하는 문제점을 가지고 있다. 현재까지 통신영역 확장을 위한 주요 기술적 사항인 효율적인 토폴로지 형성방법, 주소할당 및 라우팅 방법, 인접 네트워크 간의 비콘 충돌 회피 기법 등에 대한 활발한 연구가 진행되어 왔다. 이중 인접한 네트워크간의 비콘 충돌 방지 기법은 IEEE 802.15.4의 네트워크가 비콘에 의해서 관리된다는 점을 고려하였을 때 데이터 전송 및 네트워크 유지를 위해 우선적으로 해결되어야 할 사항이다. 본 연구에서는 제안된 비콘 충돌 회피 기법을 분석하고, 이중 비활성 구간(inactive portion)을 활용한 기법에 대한 구체적인 구현 방안을 제시 하였다. 또한 상용 임베디드 장치인 Nano-24에 설계한 비콘 충돌 회피 기법을 구현하여 동작을 검증, 분석하였다.