• 한국자기학회지
• /
• 제8권3호
• /
• pp.131-137
• /
• 1998

동시진공증착한 Ag-Co합금박막의 두께에 따르는 미세구조 및 거대자기저항의 거동의 변화를 연구하였다. 증착된 상태에서 40 at.%Co 합금의 200nm두께에서 최대 24%의 자기저항을 얻었다. 합금박막의 두께가 감소함에 따라, 특히 50NM 이하에서 비저항이 급격하게 증가되었고, 비저항 차 및 자기저항은 감소하였다. 비저항의 증가는 주로 표면저항의 증가가 주도하였다. 고분해능 T뜨을 사용하여 두께 감소에 따르는 합금박막의 미세구조 변화를 분석한 결과, 첫째 aG 및 cO 입자의 크기가 감소하며, 둘째 Co 및 Ag간의 상호 고용도가 증가되며, 섯째 Co입자의 형성비의 변화가 확인되었다. 이러한 미세구조적 변화는 자성체 입자의 자기모멘트, 자기이방성 등의 가지 상태의 변화를 가져오게 되어 자기저항에 영향을 끼치는 것으로 분석된다. 따라서 50nm 이하에서 거대자기저항의 감소는 표면에서의 스핀전도에 의한 형상 뿐만 아니라 미세구조의 면화도 크게 기여하는 것으로 보인다.

• 한국재료학회지
• /
• 제19권9호
• /
• pp.468-472
• /
• 2009

The silver nanofluids were synthesized by the pulsed wire evaporation (PWE) method in a liquid-gas mixture. The size and microstructure of nanoparticles in the deionized water were investigated by a particle size analyzer (PSA), transmission electron microscope (TEM), and scanning electron microscope (SEM). Also, the synthesized nanofluids were investigated in order to assess the stability of dispersion of nanofluid by the zetapotential analyzer and dispersion stability analyzer. The results showed that the spherical silver nanoparticle formed in the deionized water and mean particle size was about 50 nm. Also, when explosion times were in the range of 20$\sim$200 times, the absolute value of zeta potential was less than -27 mV and the dispersion stability characteristic of low concentration silver nanofluid was better than the high concentration silver nanofluid by turbiscan.

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.70-76
• /
• 2017

To synthesize copper nanoparticle a thermal decomposition was adopted. And to solve the problem of surface oxidation of the synthesized copper powder an electroless Ag plating method was used. The size and shape of synthesized Cu nanoparticle were affected by the size of copper oxalate used as a precursor, reaction solvent, reaction temperature and amount of reducing agent. Especially reaction solvent is dominant factor to control shape of Cu nano-particle which can have the shapes of sphere, polygon and rod. In case of glycerol, it produced spherical shape of about 500 nm in size. Poly ethylene produced uniform polygonal shape in about 700 nm and ethylene glycol produced both of polygon and rod having size range between 500 and 1500 nm. The silver coated copper powder showed a high electrical conductivity.

• 공업화학
• /
• 제18권1호
• /
• pp.17-23
• /
• 2007

제지용 무기안료에 항균기능과 광촉매 탈취기능을 부여하기 위해 hybridization system을 이용하여 Ag 용액과 $TiO_2$로 표면 개질 처리하여 기능성 무기안료를 제조하고, 이를 이용하여 항균 및 탈취 기능을 갖는 특수지를 제조한 후 내항균 특성을 평가하였다. 내항균 평가로는 균의 생성여부를 눈으로 직접 확인 할 수 있는 halo test법, 균들의 생육 저하효과를 확인하는 방법인 inhibition growth test와 정균감소법을 사용하였다. 또한 제조된 항균기능성 특수지를 벽지용도로 적용하고자 하였으며, 내항균 평가 시 항균벽지 주위로 선명한 클리어 존이 형성되어 균의 성장 억제를 육안으로 확인할 수 있었다. 항균 및 탈취기능을 지니는 특수지의 휘발성 유기화합물 분해능 평가를 위한 benzene의 광촉매 분해 효율실험에서 반응시간 80min 동안 45~50%의 제거효율을 보였으며, 반응시간 30 min 정도에서 분해효율이 90% 이상 도달함을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.502-502
• /
• 2007

Current thin film process using memory device fabrication process use expensive processes such as manufacturing of photo mask, coating of photo resist, exposure, development, and etching. However, direct printing technology has the merits about simple and cost effective processes because inks are directly injective without mask. And also, this technology has the advantage about fabrication of fine pattern line on various substrates such as PCB, FCPB, glass, polymer and so on. In this work, we have fabricated the fine and thick metal pattern line for the electronic circuit board using metal ink contains Ag nano-particles. Metal lines are fabricated by two types of printing methods. One is a conventional printing method which is able to quick fabrication of fine pattern line, but has various difficulties about thick and high resolution DPI(Dot per Inch) pattern lines because of bulge and piling up phenomenon. Another(Second) methods is sequential printing method which has a various merits of fabrication for fine, thick and high resolution pattern lines without bulge. In this work, conductivities of metal pattern line are investigated with respect to printing methods and pattern thickness. As a result, conductivity of thick pattern is about several un.

• Nano
• /
• 제13권12호
• /
• pp.1850145.1-1850145.8
• /
• 2018

In this study, a double-solvent radiation method is proposed to prepare silver nanoparticles in the pores of metal-organic framework MIL-101(Cr). The results reveal that well-dispersed silver nanoparticles with a diameter of about 2 nm were successfully fabricated in the cages of monodisperse octahedral MIL-101(Cr) with a particle size of about 400 nm. The structure of MIL-101(Cr) was not destroyed during the chemical treatment and irradiation. The resulting Ag/MIL-101 exhibits excellent catalytic performance for the reduction of 4-nitrophenol. This method can be extended to prepare other single or bimetallic components inside porous materials.

• 한국재료학회지
• /
• 제34권7호
• /
• pp.370-376
• /
• 2024

In this study, we report significant improvements in lithium-ion battery anodes cost and performance, by fabricating nano porous silicon (Si) particles from Si wafer sludge using the metal-assisted chemical etching (MACE) process. To solve the problem of volume expansion of Si during alloying/de-alloying with lithium ions, a layer was formed through nitric acid treatment, and Ag particles were removed at the same time. This layer acts as a core-shell structure that suppresses Si volume expansion. Additionally, the specific surface area of Si increased by controlling the etching time, which corresponds to the volume expansion of Si, showing a synergistic effect with the core-shell. This development not only contributes to the development of high-capacity anode materials, but also highlights the possibility of reducing manufacturing costs by utilizing waste Si wafer sludge. In addition, this method enhances the capacity retention rate of lithium-ion batteries by up to 38 %, marking a significant step forward in performance improvements.

• 한국정밀공학회지
• /
• 제31권6호
• /
• pp.491-495
• /
• 2014

We developed a compact high-precision slot-die coating machine for thin-film deposition on a flexible substrate. For smooth and precise coating, air-bearing and linear motor system were employed to minimize velocity ripple. The gap control mechanism is specially designed to have repeatability of gap between nozzle and substrate under 1 ${\mu}m$. Due to extremely precise gap control, the machine can coat thin-films down to 50 nm with $200mm{\times}100mm$ size. A thin film of Ag nano-particle ink is coated for demonstration.

• 한국의류학회지
• /
• 제29권7호
• /
• pp.918-925
• /
• 2005

The following are the results from the infrared body temperature image test to verify the changes in facial temperature according to call duration with a cellular phone. As for the body temperatures, it appears to be the mean value at the upper central point of phone's battery among 7 different points that are measured, and to be the highest at srernocleido-mastoid and scapular trapezius muscle triangle zone$(34.25^{\circ}C\; and\;34.05^{\circ}C\;each)$. The changes of body temperature according to the time duration shows that the body temperature rises according to the length of phone use because of the heat emitted from the battery. As for the temperature changes according to blocking materials, the one without processing appears to be higher in the mean temperature compared to the others that are processed, NSS(Nano Silver Silk) and NSG(Nano Silver Silk Gold) appear to be the lowest in the temperature to show the best blocking property. As for the temperature changes according to measuring points, it appears to be the highest at P4, P5 with all materials, and one with NSG to be the lowest at Pl, P2, P3, and one with NSS to be the lowest at P3, P4, P5, P6, which is due to the thermal conduction of Au and Ag. And the mean temperature at each point appears to be different according to the materials. Therefore, the study conducted with human participants requires a proper particle size of it which would not penetrate cellular tissues and a proper binder and binding treatment for it, to prevent the physical fatigues and the potential diseases. However, it is highly required for back-up researches to verify various aspects in applying nano silver to textile products.

• 대한환경공학회지
• /
• 제27권7호
• /
• pp.771-776
• /
• 2005

최근 항균 성능이 뛰어나면서도 인체에 유해하지 않은 나노 사이즈 은 입자를 이용한 항균 제품 개발 및 연구가 활발히 이루어지고 있음에 따라, 나노 사이즈의 은 입자를 보다 쉬운 방법으로 균일하게 제조하고, 그 특성을 평가하는데 많은 관심이 집중되고 있다. 본 연구에서는 은 이온의 광환원을 통해 나노 은 입자를 $15{\sim}20\;nm$ 크기로 균일하게 제조한 뒤, 나노 은 입자의 농도, pH, 온도가 변화함에 따른 항균 특성을 살펴보고 이를 정량적으로 평가, 은 이온의 항균 특성과 비교하였다. 또한 주사 전자 현미경과 투과 전자 현미경을 통하여 나노 은 입자의 미생물 불활성화 특성을 은 이온의 미생물 불활성화 특성과 비교하였다. 주요 결과로는 나노 은 입자의 항균 효과는 동일한 은 농도를 기준으로 하였을 때 은 이온의 항균 효과에 비하여 약 20배 정도 적은 것을 알 수 있었다. 또한 나노 은 입자의 농도, 온도가 높을수록 항균 성능은 향상됨을 알 수 있었으며 이는 은 이온의 실험 결과와 일치한다. 그러나 나노 은 입자의 항균 성능은 높은 pH에서 향상된 반면, 은 이온의 경우 pH 변화에 따른 항균 성능 변화가 관찰되지 않았다. 나노 은 입자와 은 이온에 의해 불활성화된 미생물을 주사 전자 현미경과 투과 전자 현미경으로 관찰한 결과, 나노 은 입자는 미생물 세포막을 크게 손상시키는 반면, 은 이온은 그렇지 않았다. 은 이온의 경우 은 이온이 미생물 안으로 흡수되어 세포질막을 손상시켜 미생물을 불활성화 시키는 것으로 알 수 있었다.