• Nuclear Engineering and Technology
• /
• v.45 no.6
• /
• pp.821-826
• /
• 2013

In the present study, the effects of various heat treatments on the microstructure and mechanical properties of dual phase ODS steels were investigated to enhance the high strength at elevated temperature. Dual phase ODS steels have been designed by the control of ferrite and austenite formers, i.e., Cr, W and Ni, C in Fe-based alloys. The ODS steels were fabricated by mechanical alloying and a hot isostatic pressing process. Heat treatments, including hot rolling-tempering and normalizing-tempering with air- and furnace-cooling, were carefully carried out. It was revealed that the grain size and oxide distributions of the ODS steels can be changed by heat treatment, which significantly affected the strengths at elevated temperature. Therefore, the high temperature strength of dual phase ODS steel can be enhanced by a proper heat treatment process with a good combination of ferrite grains, nano-oxide particles, and grain boundary sliding.

• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.4
• /
• pp.219-224
• /
• 2006

Silver paste with low sintered temperature has been developed in order to apply electronic parts, such as bus electrode, address electrode in PDP (Plasma Display Panel) with large screen area. In this study, nano-sized silver particles with 10-30 nm were synthesized from silver nitrate ($AgNO_3$) solution by chemical reduction method and silver paste with low sintered temperature was prepared by mixing silver nanoparticles, conventional silver powder with the particle size 1.6 um and Pb-free frit. Conductive thick film from silver paste was fabricated by screen printing on alumina substrate. After firing at $540^{\circ}C$, the cross section and surface morphology of the thick films were analyzed by FE-SEM. Also, the sheet resistivity of the fired thick films was measured using the four-point technique.

• Journal of the Korean Ceramic Society
• /
• v.49 no.1
• /
• pp.118-123
• /
• 2012

GDC20($Ce_{0.8}Gd_{0.2}O_{1.9}$) powder was synthesized from Ce and Gd nitrate solutions using ammonium carbonate($(NH_4)_2CO_3$) as a precipitant. Attrition-milling of the powder, which had been calcined at $700^{\circ}C$ for 4 h, decreased an average particle size of 2.2 ${\mu}m$ to 0.5 ${\mu}m$. The milled powder consisted of nano-sized spherical primary particles. Due to the excellent sinterability of the powder, sintering of the powder compacts for 4 h showed relative densities of 80% at 1000 $^{\circ}C$ and 96.5% at $1200^{\circ}C$, respectively. Densification was found to almost complete at $1300^{\circ}C$, resulting in a dense and homogeneous microstructure with a relative density of 99.5%. The grains of ~0.2 ${\mu}m$ in size at $1200^{\circ}C$ grew to ~1 ${\mu}m$ in size at $1300^{\circ}C$ as a result of a rapid grain growth.

• Journal of the Korean Ceramic Society
• /
• v.48 no.6
• /
• pp.516-519
• /
• 2011

Indium tin oxide (ITO) coatings were made using an ITO slurry and an ITO sol. This was achieved by dispersing nanosized ITO powder in a mixed solvent without any dispersant and developing an adhesive ITO sol from indium acetate and tin tetrachloride in a mixture of DMF and n-butanol. Coating was carried out in one step by spin coating an ITO slurry, which was then followed by an ITO sol over it. Here, the sol penetrates into the nano ITO particle layers to make them adhere to each other as well as to a glass substrate. This is then followed by sintering at 500$^{\circ}C$ for 1 h to produce a uniform film consisting of ITO particles of about 50 nm and 10 nm. ITO films were obtained with sheet resistances from 450 to 1500 ohm/${\Box}$ by varying spin speed and concentration. Transmittance is higher than 90% at 550 nm.

• Journal of the Korean Ceramic Society
• /
• v.51 no.3
• /
• pp.224-230
• /
• 2014

Nano-sized gadolinium-doped ceria (GDC)/nickel particle-dispersed $La_ySr_{1-y}Ti_{1-x}Fe_xO_3$ (LSFTO)-based composite solid oxide fuel cell anodes were fabricated by an infiltration method and the effects of the GDC/Ni nanoparticles on the anode polarization resistance and cell performance were investigated in terms of the infiltration time and nickel content. The anodic polarization resistance of the LSFTO anode was significantly enhanced by GDC and/or Ni infiltration and it decreased with increasing infiltration time and Ni content, respectively. It is believed that the observed phenomena are associated with enhancement of the ionic conductivity and catalytic activity in the nanocomposite anodes by the addition of GDC and Ni. Power densities of cells with the LSFTO and LSFTO-GDC/Ni nanocomposite anodes were 150 and $300mW/cm^2$ at $800^{\circ}C$, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.4
• /
• pp.247-249
• /
• 2016

In this study, we investigated the color change of the normal light gray granite as the high value color granite. By coating the metal catalyst liquid on the surface of granite stone, the metal particles were penetrated into the granite and the color of granite was changed permanently through the annealing treatment. To increase penetration depth into the granite, we used DC (direct current) bias. Two kinds of bias were used such as DC bias and pulse DC bias. And the penetration time was changed as 30 and 60 min. In all cases, the color granite were successfully obtained. Regardless of the catalyst reaction time, the penetration depth was increased by using the bias treatment. We obtained a penetration depth of 21 mm with the DC pulse bias during 60 min.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.12
• /
• pp.5185-5188
• /
• 2016

Objective: Targeted-drug-delivery based lipid nanoparticles has emerged as a new and effective approach in cancer chemotherapy. Here, we investigated the ability of folate-modified nanostructured lipid carriers (NLCs) to enhance letrozol (LTZ) efficacy in MCF-7 breast cancer cells. Methods: New formulations were evaluated regarding to particle size and scanning electron microscope (SEM) features. Anti-proliferative effects of LTZ loaded nanoparticles were examined by MTT assay. To understand molecular mechanisms of apoptosis and cell cycle progression, flow cytometric assays were applied. Results: Optimum size of nanoparticles was obtained in mean average of $98{\pm}7nm$ with a poly dispersity index (PDI) of 0.165. The IC50 value was achieved for LTZ was $2.2{\pm}0.2{\mu}M$. Folate-NLC-LTZ increased the percentage of apoptotic cells from 24.6% to 42.2% compared LTZ alone (p<0.05). Furthermore, LTZ loaded folate targeted NLCs caused marked accumulation of cells in the subG1 phase. Conclusion: Taken together, our results concluded that folate targeted LTZ can be considered as potential delivery system which may overcome limitations of clinical application of LTZ and improve drug efficacy in tumor tissue.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.538-541
• /
• 2008

The carbon laden suspensions in water with no surfactants have poor stability caused by the hydrophobic layer of particles. In this study, the water-based carbon nano colloide(CNC) was successfully produced using electro-chemical one-step method without agent. The properties of CNC were characterized by using various techniques such as particle size analyzer, TEM, FT-IR, turbidity meter, viscometer, and transient hot-wire method. The average size of the suspended in the CNC was 15 nm in diameter. The thermal conductivity of CNC compared with water was increased up to 14% with 4.2wt% concentration. The CNC was stable over 600hr. The enhanced colloidal stability of CNC may be caused by the chemical structures, such as, hydroxide and carboxyl groups formed in outer atomic layer of carbon, which (i) made the carbon nanofparticles hydrophilic and (ii) prevented the aggregation among nanoparticles.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.423.2-423.2
• /
• 2014

비정질 실리콘 박막 태양전지는 1970년대 중반 개발된 이후 현재까지 지속적으로 연구 개발이 이루어져 왔으며, 대면적의 용이성 및 재료 사용의 효율성 등 산업적 측면에서 많은 장점을 보이고 있다. 하지만, 재료 특유의 무질서(disorder)로 인한 Voc의 한계 및 광 열화 현상 등의 문제점이 극복해야 할 과제로 남아있다. 이를 개선하기 위한 시도 중 하나로 나노입자를 포함한 실리콘 박막 제작을 통해 재료의 무질서도를 낮추고 전기광학적 물성을 개선하는 방법이 제안되고 있다. 본 연구에서는 유도결합 플라즈마(ICP, Inductively coupled plasma)를 사용하여 제작한 실리콘 나노입자 박막으로 비정질 실리콘 박막의 한계를 극복하고자 한다. 실리콘 나노입자를 사용하여 조밀한 박막을 제작하는데 중요한 변수로는 유도결합 플라즈마 반응기 상, 하부의 압력차 및 이로 인한 제트분사의 속력, 그리고 나노 입자의 크기 등이 중요하게 작용한다. 합성된 입자의 크기와 물성의 변화는 유입되는 반응 가스의 양, 공정압력과 파워에 의존한다. 실리콘 나노입자 박막을 다양한 플라즈마 조건에 따라 제작한 후 XRD, Raman, SEM, TEM을 이용하여 물성 변화를 관찰하였으며, 이를 통해 박막태양전지로의 응용 가능성을 제시하고자 한다.

• Macromolecular Research
• /
• v.14 no.6
• /
• pp.646-653
• /
• 2006

Highly hydrophilic, uniform, superparamagnetic and nontoxic maltotrionic acid (MA)-coated magnetite nano-particles (MAM) were prepared and characterized by TEM, DLS, XRD and VSM. MA was used to improve the biocompatibility, monodispersity and non-specific intracellular uptake of nanoparticles. Folic acid (FA) was subsequently conjugated to the MAM to preferentially target KB cells (cancer cells) that have folate receptors expressed on their surfaces and to facilitate nanoparticles in their transit across the cell membrane. Finally, fluorescence isothiocyanate (FITC) was added to the nanoparticles to visualize the nanoparticle internalization into KB cells. After the cells were cultured in a media containing the MAM and MAM-folate conjugate (FAMAM), the results of fluorescence and confocal microscopy showed that both types of nanoparticles were internalized into the cells. Nevertheless, the amount of FAMAM uptake was higher than that of MAM. This result indicated that nanoparticles modified with MA and FA could be used to facilitate the nanoparticle uptake to specific KB cells (cancer cells) for molecular imaging.