• Korean journal of applied entomology
• /
• v.28 no.1
• /
• pp.16-22
• /
• 1989

A series of experiments was undertaken to learn bionomics and gowt plant resistance of the seedcorn maggot, Delia platura(Meigen), under controlled(24$\pm$$2^{\circ}C$, RH70$\pm$5%, and LD 16:8h)and field conditions. The preoviposition period for the flies was 9 days. The females survived for an average of 50(3-77) and the males for 24(1-59) days. A greater proportion of flies emerged between 6:00 A.M. and 9:00 A.M., soon after the sun rise. After the over-wintering, adults started to emerge in mid-April from pupae located near the soil surface, and peaked in late April by others located deeper. The sex ratio was about 1:1 with total samples of 1,609 females and 1,641 males. Weight of pupae reared from onion was heavier than those from other diets in the laboratory, however its size was samller than that of natural flies. Considerably more eggs were laid near pea seeds than other hosts tested. Among beans, Bapmitkong with blue seed-coat and a cowpea bean strain were preferred for oviposition. 'Namcheon` cultivar was found to be susceptible to attack by the larvae in the laboratory.

• Journal of the Korean Society of Radiology
• /
• v.14 no.6
• /
• pp.763-772
• /
• 2020

During X-ray examinations in the DR system, the scattered X-rays physically generated by the patient cause image blurring in poor quality. Although X-rays to increase the contrast of images, this increases the patient's exposure dose and is likely to result in grid induced artifacts. Therefore, the purpose of this study is obtain images similar to those of real-grid with non-grid level conditions using a VGR (Virtual Grid Role) algorithm that serves as a virtual grid. Comparing MTF, SNR and CNR of non-grid and VGR algorithm images obtained with 70% exposure conditions of real-grid images showed that the MTF0.5 differed from 0.265 to 0.350 and the MTF0.1 from 0.412 to 0.467 and the SNR, CNR were also different. In addition, comparing MTF, SNR and CNR of VGR algorithm and real-grid images showed that the MTF0.5 differed from 0.350 to 0.367 and the MTF0.1 from 0.467 to 0.483 and the SNR, CNR by little.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.363-368
• /
• 1990

As a work on the investigation of the processing aptitude of the Korean soybean cultivars, the soybean curd was made from 19 Korean soybean cultivars on a laboratory scale. The yield, proximate composition and rheological and organoleptic property of the resultant soygean curd were analyzed. The yields of soybean curd were ranged from 262.33% to 311.63%, being positively correlated with the soluble protein contents of the recommended soybean cultivars (r=0.9621). The recovery rate of protein in Baekun and Yeunha to the soybean curd was 72.94%, 70.62%, respectively. More than 80% of lipid in soybeans of Yeunha, Dankyung, Danyeob was transferred to the soybean curd. Lightness of the soybean curd made from Baekun, Kwanggyo, Saeal, Hill was higher than that of the others. The mechanical hardness of the soybean curd was strongly correlated with the final moisture content of the soybean curd (r =-0.8312), but not with the protein content of the soybean (r=0.1848). In the organoleptic test for color, texture, flavor and overall preference of the resultant soybean curd, the quality of Dankyung, Namcheon, S-138, Baekun was evaluated highly.

• Journal of the Korean Geographical Society
• /
• v.42 no.1 s.118
• /
• pp.27-40
• /
• 2007

The streams evolve to diverse forms influenced by various factors such as rock resistance tectonic process, sediments and discharge. This study focuses on erosion resistance of rocks among these factors. The morphology of plane and longitudinal profile has been analysed in upper and lower reach of 6 streams using GIS; Yeoryong-cheon, Heungjeong-cheon, Duhak-cheon, Daehwa-cheon, Namcheon-cheon, Guryong-cheon, having distinct bedrock types between upper and lower reach. While the basins of granite have gentle slope, low concavity and wide valley area, those of gneiss form steep slope, high concavity and narrow valley area. However, the basins of sedimentary rock make steep slope and high relief in main channel, the other features show some differences in each stream. Among the various morphological features, the indices on slope and concavity of main channel, drainage density, ratio of valley area, average slope and average relief of the basin which have clear differences between rocks in upper and lower reach are calculated to interpret the erosion resistance of rocks in upper and lower reach. As a result, the upper reaches composed of gneiss have the highest erosion resistance, sedimentary rocks in upper and lower reaches show moderate resistance, and granite reaches generally have the lowest resistance except the upper reaches bordered by sedimentary rock.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.2
• /
• pp.37-44
• /
• 2010

Our country traditionally employed a defensive system against the aggression by foreign powers by using a town castle and mountain castle. The moat was one of such a defensive system; however, there is few research work on a moat in comparison with its long history. This study was carried out to see the process of the changes of the Wolseong Fortress at Gyuongju, focused on the moat of the scale and nature of the construction methods to analyze such a Wolseong Fortress at Gyuongju as a result of consideration through bibliographical study, on-site investigation, and interviews, etc. This research discovered some facts as follows: the moats of Wolseong fortress at Gyeongju are roughly divided into three types; the first one is a natural moat flowing curved by the south side of Wolseong using the natural stream[Namcheon]as it is; the second one is a pond-type moat made by digging up plane non-rectangular pond along stereobate of castle wall with lakefront built with stream pebbles, and the last one is masonry moat at the east side of Wolseong with chisel-trimmed granites orderly piled in a plane triangular form. Among these, the pond-type moat was identified at the east-north-west side of Wolseong and the pond slopes from east to west as a separate one constructed with the terraces.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.234-253
• /
• 2018

Within the Gyeongju Basin lies the central an ancient tombs (Wolseongbuk tombs), which are seen to be the core tombs of the Silla ruling class. An accurate understanding of the location of the ancient tombs, commonly known as a flatland area, provides a clue to understanding the contrast process and direction of the ancient tombs. This in turn requires an accurate understanding of the surrounding landscape, including where the ancient tombs are located. In other words, it must be possible to restore as much of the highland area as possible within the basin in which the ancient tombs are located. All data were analyzed as deeply as possible in order to identify the topographical features of the ancient tombs. As a result, it appears that the ancient tombs are located at the end of a fan or at the end of the line, and a large number of springs and wetlands are distributed around the area. This area is relatively low and unsuitable for generating high levels of moisture on the ground. These topographical features are directly related with the distribution of polymers, and solids were completely formed to avoid wetlands. Meanwhile, the ancient tombs are divided into several zones by springs and wetlands, and each area also has the characteristics of large groups where the boundaries are protruding and isolated. Also, this aspect was found to be true for the Oreung around Namcheon. After all, the location and distribution of Silla in the Daerungwon area are the result of the reflection of the fine geographical features of the Gyeongju basin, which are the key factors of springwater and wetlands.

• Korean Journal of Ichthyology
• /
• v.31 no.1
• /
• pp.16-22
• /
• 2019

Investigations on the study of the distribution aspects and extinction threat evaluation of the Korean endemic species, Iksookimia pacifica were done from 2017 to 2018 in Korea. During the study period, the samples of I. pacifica were collected in 17 streams, 46 sites (from Baebongcheon Stream of Goseong-gun to Gunsuncheon Stream of Gangneung-si) among the noted 33 streams and 104 sampling sites investigated. The population size of I. pacifica was relatively large in streams such as Bukcheon, Baebongcheon, Hwasangcheon, Cheonjincheon, Ohhocheon Stream etc., but the population size was small in streams such as Sacheoncheon, Namcheon, Gangneung Namdaecheon Stream etc. The main habitat of I. pacifica was the downstream pool of clean water with slow velocity and sand bottoms, and their sensibility was estimated to be due to river work and water pollution. Comparing the previous records of the appearance of I. pacifica, they were first seen in Sampocheon Stream, but they did not appear in Jusucheon, Jeoncheon, Samcheok Osipcheon Stream. Given this evidence as noted for the 19.5% reduction in occupancy within 3 generations, in small appearance range ($1,343km^2$) and small occupancy area ($184km^2$), the number of locations were many (18) and the population was relatively large within the range of habitat. Therefore, I. pacifica is now considered a Near Threatened (NT) based on the IUCN Red List categories and criteria.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.929-937
• /
• 2023

Human equivalent phantoms manufactured using 3D printers are cheaper and can be manufactured in a short time than conventional human phantoms. However, many phantoms are manufactured with less than 100 % of Infill Density, one of the 3D printer output setting variables. Therefore, this study compared the Bone Phantom CT number, which differs from the ratio of five Infill Density produced using a 3D printer, to the CT number of the actual human body Bone. In addition, the usefulness of the manufactured phantom was evaluated by producing a 100 % elbow joint phantom with Infill Density and setting the Infill Density to 100 % through CT number comparison for each tissue on computed tomography (CT). As a result, the Bone Phantom printed with 100 % Infill Density did not show the most statistically significant difference from the CT number value of the actual human Bone, and the CT number of each tissue did not show a statistically significant difference from the CT number value of each tissue of the actual human elbow joint.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1091-1097
• /
• 2023

Bolus is used in radiation therapy to prescribe an even dose to the tumor when the skin surface is inclined or has irregularities. At this time, the dose to the skin surface increases. Due to the patient's unique body structure and irregular skin, voids may occur between the bolus and the skin, which may reduce the accuracy of treatment. Therefore, in this study, the existing bolus and the self-produced bolus through 3D printing were applied to the nasal area, and the difference between the surface dose after treatment plan and the dose directly measured with an Optically Stimulated luminescence(OSL) dosimeter was compared to the existing bolus. The bolus rate was 97%, PLA 100.33%, ePETELA 75A 100.53%, and ePETELA 85A 100.36%. It was confirmed that there was little error in the measurement values and treatment plan values for each material. In addition, compared to when applying a conventional bolus, a difference of -3% to +0.5% for a 3D printed bolus can be confirmed, so a customized bolus produced through 3D printing can complement the shortcomings of the existing bolus. It is believed that there will be.

• Korean Journal of Ecology and Environment
• /
• v.57 no.2
• /
• pp.92-101
• /
• 2024

Current distribution of Korean Cottus pollux was investigated by conducting field surveys and environmental DNA analysis in September to November 2022 and March to May 2023. As a result of the field survey, the presence of C. pollux was confirmed in the uppermost stream of Hyeongsangang River, as well as in Deokdongcheon, Jeolgolcheon, and Hoamcheon Streams. The main habitat of C. pollux was the riffle area in the upper reaches of streams with clean water and boulder-cobble bottoms. As a result of environmental DNA analysis, the samples determined to be positive included all streams in which the presence of C. pollux was confirmed in the field survey. In addition, Namcheon and Singwangcheon Streams were determined to be positive, indicating potential as its habitats. Since C. pollux has a narrow distribution area and a small population size, continuous monitoring and conservation measures are required to immediately respond to damage caused by typhoons and river works, which are the main causes of habitat disturbance, in order to maintain a stable population.