• Asian-Australasian Journal of Animal Sciences
• /
• 제17권10호
• /
• pp.1430-1433
• /
• 2004

A study was conducted to determine the effect of different alkali treatments on changes in chemical composition and on degradability of bagasse and rice straw. This study divided into 2 experiments, the first with bagasse and the second with rice straw. Each experiment comprised 9 treatments which included: untreated control; 3% NaOH; 6% NaOH; 3% urea; 6% urea; 3% NaOH/3% urea; 3% NaOH/6% urea; 6% NaOH/3% urea; 6% NaOH/6% urea. In both experiments, crude protein contents were increased from 2.0 to 12.5 units for bagasse and 3.1 to 13.7 units for rice straw by urea treatments. Ash contents of the treated bagasse and rice straw were increased over the untreated control (1.5-9.7 units for bagasse; 4.2-8.8 units for rice straw). The effects on ether extract, crude fiber, neutral detergent fiber and acid detergent fiber of the treated bagasse and rice straw were variable. Nylon bag degradability of dry matter and crude fiber were increased by treatments applying NaOH and NaOH plus urea but not urea alone. In contrast, the egradability of neutral detergent fiber and acid detergent fiber were reduced compared with the untreated control. From these degradability studies, it can be concluded that the most efficient treatments of bagasse were those treatments with 6% NaOH, followed by treatments with 6% NaOH plus 3% or 6% urea and 3% NaOH plus 3% or 6% urea, respectively. However, when comparison was made on the cost of chemical used to treat the agricultural by-products, particularly in case of rice straw, 3-6% urea would be appropriate.

• 한국의류학회지
• /
• 제11권2호
• /
• pp.101-112
• /
• 1987

The purpose of this study is to investigate the influence of addition of sodium dodecyl sulfate(SDS) when wool is treated with sodium hydroxide(NaOH). Physical and chemical changes were examined on wool treated with various cone. of NaOH and SDS simultaneously. The result are as follows. 1. The higher the temperature and the longer the time of NaOH treatment are, the more alkali damage wool get : increase in weight loss and decrease in urea-bisalphite solubility and in tensile strength. But the treatment time reacts less effective than the temperature. 2. When wool is treated with NaOH, at NaOH cone. under $10^{-3}M$., the addition of SDS alleviates the alkali reaction on wool: increase in cystine contents and in urea-bisulpite solubility, and decrease in degree of swelling. On the other hand, at NaOH cone. over $10^{-2}M$., the addition of SDS promotes the alkali reaction on the wool. 3. When wool is treated with NaOH, the addition of SDS shows no changes on the tensile strength. On the other hand, at NaOH cone. under $10^{-2}M$., the addition of SDS shows no changes on the softness of wool, but at the $10^{-1}M$. NaOH cone. addition of SDS increases the soft-ness of wool. The area shrinkage of wool treated with NaOH and SDS shows less changes than with NaOH only.

• 펄프종이기술
• /
• 제41권4호
• /
• pp.58-64
• /
• 2009

This study was carried out to prepare high porosity pulp for oil and air filter media from commercial grade NBKP with 6 - 20% NaOH treatment. The fiber width of NBKP remarkably decreased by NaOH pretreatment. The air permeability of the test sheet prepared from alkali-pretreated NBKP increased with increasing NaOH concentration up to 15%. The burst factor was greatly decreased by alkali pretreatment. By 15 - 20% NaOH pretreatment of NBKP, it could be possible to prepare a high porosity pulp. It seems that the high porosity of the pulp was due to a strong swelling and a great change of the cellulose crystalline lattice from cellulose I to cellulose II with NaOH treatment of NBKP. The study suggested that alkali- pretreated NBKP could be used for manufacturing oil and air filter media.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1089-1090
• /
• 2006

Biomimetic apatite deposition behaviors on Zr-1Nb and Ti-6Al-4V plate with various surface conditions were examined. Both alloys were polished with abrasive papers to have different roughness and some of them were treated in NaOH before exposition in simulated body fluid. NaOH treatment was found to enhance the deposition rate of apatite on Ti-6Al-4V significantly. On the other hand, the deposition rate of Zr-1Nb was not influenced by NaOH treatment. Without NaOH treatment, the polished Zr-1Nb with abrasive paper was found to induce more apatite nucleation than the polished Zr-6Al-4V.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.75-83
• /
• 2001

The potential of oxygen delignification is a powerful tool to reduce detrimental environmental effects. This study was performed to investigate the effect of steam explosion treatment of chemically treated oak wood on oxygen-alkali pulping. Pulp yield during steam explosion treatment by ${Na_2}{O_3}$-NaOH impregnation was higher than the other impregnation chemicals. Also, NaOH extraction at room temperature after steam explosion treatment improved the kappa number from 140~116 to 90~64. Oxygen-alkali pulping of chemical steam explosion treated woods affected to pulp yields. ${Na_2}{O_3}$-NaOH impregnation was very effective to higher carbohydrate yields at same delignification level. Its carbohydrate yield seemed to be highly related to the effluent pH. Oxygen-alkali pulping after steam explosion treatment of ${Na_2}{O_3}$-NaOH impregnated wood was shown that carbohydrate yield was very high because its effluent pH was increase from natural to mild alkali. Even if oxygen bleaching limit the delignification to 50% in order to avoid unacceptable yield and viscosity losses, oxygen-alkali pulping after steam explosion by ${Na_2}{O_3}$-NaOH impregnation was possible to extend the delignification more than 80%. Considering high pulp yield with lower lignin content from steam explosion treated wood, it might be profitable to end the cook at a high kappa number instead of a low kappa number, and continuously apply the oxygen delignification, in order to better quality pulp.

• Asian-Australasian Journal of Animal Sciences
• /
• 제6권1호
• /
• pp.5-11
• /
• 1993

First crop of alfalfa (Medicago sativa L.) was harvested, wilted and ensiled with or without NaOH or $NH_3$, and fed to three rumen fistulated goats in a $3{\times}3$ Latin-square design. Each alkali treatment (2.44% of alfalfa dry matter) was made by spraying its solution prior to ensiling. Silage pH, $NH_3-N$ and butyric acid concentration were increased with each alkali addition, and NaOH-treated silage showed the lowest chemical quality. Compared with untreated silage, digestibilities of organic matter, ADF and cellulose were depressed by both alkali treatments, and the reductions in NaOH-treated silage were significant. Crude protein digestibility was also significantly decreased in NaOH-treated silage, but the goats receiving the silage excreted less nitrogen in urine than those on the other two silages. Nitrogen retention of goats was not different among the treatments. Ruminal solubility and potential degradability of dry matter and nitrogen determined with the in situ bag technique were reduced, and rate of degradation of the two components were increased by the NaOH treatment. Addition of $NH_3$ provided ruminal soluble nitrogen to the silage, but the rate of degradation was similar to that of untreated silage. These results suggest that NaOH treatment would denature the protein and reduce the susceptibility to microbial degradation in the rumen, while no positive effect of alkali treatment on fiber digestion and nitrogen utilization was observed in this study.

• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.393-398
• /
• 2004

This research offers recycling method of NaOH from mercerizing process of cotton fabric. The measuring system of NaOH concentration was designed for the mercerizing process and tested for various conditions which can be occurred in factory. The accuracy of the system was varied as the testing condition was changed. As the concentration of sulfuric acid used for titrating NaOH decreased, the accuracy of measuring system increased. The concentration of NaOH for waste water collected from mercerizing process was measured by 5.2%. As the ratio of newly mixed NaOH increased, moisture regain. water absorbency and whiteness of the specimen increased. The bending rigidity(B) and shear rigidity(G) decreased, as the ratio of newly mixed NaOH increased.

• 열처리공학회지
• /
• 제5권4호
• /
• pp.224-232
• /
• 1992

Coolingability of coolants is important factor in cooling processor heat treatment of steel. Using standard apparatus and method defined in the Korean Industrial Standard three different shapes of probe were designed, ie, cylinderical, spherical and square on shape with same volume of standard probe. Distilled water and sodium aquious solutions with different concentration of NaOH, NaCl and $Na_2CO_3$ were examined. Estimation of coolingability of each quenchants for the probes of cylinderical, spherical or square shape, the cooling rate is greater square, cylinder and sphere in order. Coolingability of sodium aquious solution of NaCl, $Na_2CO_3$ and NaOH is found generally greater then that of distilled water. Effectiveness of ingredients is in the order of $Na_2CO_3$, NaOH and NaCl. In both solutions coolingability increases in 20%, 5%, and 10%in order. Analytical results obtained from Finite Element Method were compared with experimental ones and found as practically satisfactional.

• 한국염색가공학회지
• /
• 제26권4호
• /
• pp.331-338
• /
• 2014

In this research, split-type complex yarn of 20:80, 40:60, 50:50 nylon6/polyester composition ratio was used in order to impose unique sense on split-type complex woven. After treating both split-type complex yarn of each ratio and its produced woven in alkali solution, we got the following results by checking physical properties based on alkali proportion and treatment time. Under the condition of NaOH 20% in this experiment, it took approximately double time 20% loss of weight. The loss of weight became high when polyester proportion of N/P(nylon6/polyester) composition ratio was low, in the same fineness yarn. Even though polyester proportion was low, the loss of weight was low when the fineness was high. N/P division was well processed at about 25% loss of weight under the condition of NaOH 20%, treatment temperature $50^{\circ}C$, and treatment time 60 minutes. The research provides that the loss of weight should be processed around treatment time 24 hours in the case of NaOH concentration 15%, and treatment time 15 hours in the case of NaOH concentration 18%, respectively, in order to achieve N/P woven division ratio of about 70%-80% in industrial fields.

• 한국작물학회지
• /
• 제48권3호
• /
• pp.169-172
• /
• 2003

약용 또는 잡초로 취급되어 왔으나 최근에는 박과접목묘의 대목으로 이용되고 있는 안동대목의 종자는 가종피 제거 또는 종자처리를 하지 않을 경우 발아가 아주 불량하다. 본 연구는 안동대목 종자 파종시 가종피 제거에 투입되는 노력을 줄일 수 있는가를 검토하고자 노화, NaOH, 세척, 저온 및 질산화 물 혼용처리 및 건조 등 순차적으로 가하여지는 물리$.$화학적 처리가 안동대목 종자의 발아 및 처리종자의 유묘출현율을 조사하였던 바 그 결과를 요약하면 다음과 같다. 1. 가종피를 제거하지 않은 채종 당년의 안동대목 종자의 발아율은 화학제를 이용한 종피연화 처리시 10% NaOH 처리시 가장 높았으나 노화처리를 통한 휴면타파 후에 처리할 경우 발아율은 더욱 향상되었다. 2. NaOH를 이용한 종피연화 처리 후의 세척을 통한 종피표면의 점액질 제거와 세척 후에 가하여지는 저온처리는 안동대목 종자의 발아율을 향상시키는 것으로 나타났다. 3. 1주간 저온처리와 동시에 가하여지는 화학제와 혼용처리로는 증류수를 공급하는 것보다는 0.2% KNO$_3$ 용액을 관주할 경우 발아율이 향상되는 것으로 나타났다. 4. 처리종자의 건조는 무건조보다는 건조시, 건조할 경우 암 상태보다는 적색광을 처리하면서 건조할 경우 발아율이 향상되었다. 5. 가종피를 제거하지 않은 안동대목 종자의 발아율은 일련의 종자처리를 통하여 80% 정도에 이르렀던 반면, 포장출현율은 60% 정도로 나타났다.