• Corrosion Science and Technology
• /
• v.17 no.3
• /
• pp.101-108
• /
• 2018

AA7010 is an Al-Zn-Mg-Cu alloy containing Zr, developed as an alternate to traditional AA7075 alloy owing to their high strength combined with better fracture toughness. It is necessary to improve the corrosion resistance and surface properties of the alloy by incorporating plasma electrolytic oxidation (PEO) method. AA7010-T7452 aluminum alloy has been processed through the forging route with multi-stage working operations, and was coated with $10{\mu}m$ thick $Al_2O_3$ ceramic aluminina coating using the plasma electrolytic oxidation (PEO) method. The corrosion, stress corrosion cracking (SCC) and nano-mechanical behaviours were examined by means of potentiodynamic polarization, slow strain rate test (SSRT) and nano-indentation tests. The results indicated that the additional thermomechanical treatment during the forging process caused a fully recrystallized microstructure, which lead to the poor environmental cracking resistance of the alloy in 3.5% NaCl solution, despite the overaging treatment. Although the fabricated PEO coating improved general corrosion resistance, the brittle nature of the coating did not provide any improvement in SCC resistance of the alloy. However, the hardness and elastic modulus of the coating were significantly higher than the base alloy.

• Carbon letters
• /
• v.25
• /
• pp.14-24
• /
• 2018

Electrochemical properties and performance of composites performed by incorporating metal oxide or metal hydroxide on carbon materials based on graphene and carbon nanotube (CNT) were analyzed. From the surface analysis by field emission scanning electron microscopy and field emission transmission electron microscopy, it was confirmed that graphene, CNT and metal materials are well dispersed in the ternary composites. In addition, structural and elemental analyses of the composite were conducted. The electrochemical characteristics of the ternary composites were analyzed by cyclic voltammetry, galvanostatic charge-discharge tests, and electrochemical impedance spectroscopy in 6 M KOH, or $1M\;Na_2SO_4$ electrolyte solution. The highest specific capacitance was $1622F\;g^{-1}$ obtained for NiCo-containing graphene with NiCo ratio of 2 to 1 (GNiCo 2:1) and the GNS/single-walled carbon $nanotubes/Ni(OH)_2$ (20 wt%) composite had the maximum specific capacitance of $1149F\;g^{-1}$. The specific capacitance and rate-capability of the $CNT/MnO_2/reduced$ graphene oxide (RGO) composites were improved as compared to the $MnO_2/RGO$ composites without CNTs. The $MnO_2/RGO$ composite containing 20 wt% CNT with reference to RGO exhibited the best specific capacitance of $208.9F\;g^{-1}$ at a current density of $0.5A\;g^{-1}$ and 77.2% capacitance retention at a current density of $10A\;g^{-1}$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.4
• /
• pp.336-350
• /
• 2001

The purpose of this study was to investigate corrosion tendency and to compare corrosion resistance of three dental magnetic attachments and its keeper alloy by coercive, electrochemical method. By using petentiodynamic polarization technique, magnetic elements and its keeper alloy of Magfit EX600 system(MF, MFK), Dyna ES regular system(DN, DNK) and Shiner SR magnet system(SR, SRK) were corroded electrochemically in 0.9% NaCl electrolytic solution. Open-circuit potential and anodic polarization curve was measured with Potentiostat(model 273 EG&E) and polarization curve was created by current density per square area following scanning of increased series of voltage in the rate of 1.0mV per second. Before and after electrochemical corrosion, the surface roughness test was done. Thereafter the change of mean surface roughness value(Ra) and mean peak value(Rt) of surface roughness was compared one another. In order to observe the corroded surface of each specimen, metallurgical light microscopic(${\times}37.5$) and scanning electron microscopic view(SEM ${\times}100$) was taken and compared one another. Conclusion is followings. 1. All of six covering metal of dental magnetic attachments and its keeper alloy were corroded in various degree after electrochemical corrosion. 2. The corrosion resistance of which used in this experiment is the following in high order; DNK, MFK, DN, MF, SRK and SR. 3. Especially Shiner magnet system and its keeper alloy were more severely corroded after electrochemical corrosion and the change of Ra Rt value were more increased than others. 4 Metallurgical and scanning electron microscopic view showed the pitting corrosion tendency of all experimental alloy but DNK and SR. 5. Covering metal of magnet was more corroded than its keeper alloy.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.192-193
• /
• 2005

Magnesium thin films were prepared on cold-rolled steel substrates by RF(Radio Frequency) magnetron sputtering technique.$^{1)}$ The crystal orientation and monitoring of the deposited films were investigated by using XRD(X-ray Diffraction) and EIS(Electrochemical Impedance Spectroscopy), respectively. The corrosion rates of Mg thin films deposited with different argon gas pressure and substrate bias voltage were monitored by AC impedance method under a cyclic wet-dry condition, which was conducted by exposure to alternate conditions of 1h immersion in 3%NaCl solution and 5h drying at 60% RH and 25$^{\circ}C$. The result of corrosion rate of Mg thin films deposited at various Ar gas pressures and substrate bias voltage under wet-dry cyclic exposure in chloride-containing solutions was showed the following conclusions. At the region I during the onset of the wet cycle, corrosion rate showed relatively low value. The increase in the Corrosion rate of region II is due to the increase in the chloride concentration. Corrosion rate of region III during the onset of the cycle zero and salt crystals remain on the metal surface.$^{2)}$

• Journal of Korea Foundry Society
• /
• v.31 no.6
• /
• pp.362-365
• /
• 2011

In the present work, the corrosion properties of Mg-xSn (x = 1, 3, 5, 7 and 9 wt.%) alloys have been investigated. Potentiodynamic polarization and immersion tests were carried out in 3.5% NaCl solution of pH 7.2 at room temperature to measure the corrosion properties of Mg-xSn (x = 1, 3, 5, 7 and 9 wt.%) alloys. With increase of the Sn contents, the volume fraction of the $Mg_2Sn$ phase was increased. The corrosion rate of Mg-xSn alloys was increased up to 7 wt.%Sn and decreased above 9 wt.%Sn. Initiation of galvanic site during immersion mainly occurred at Mg/$Mg_2Sn$ interface and propagation went into ${\alpha}$-Mg. For this reason, corrosion properties of Mg-xSn (added from 1 wt.%Sn to 7 wt.%Sn alloys) alloys are decreased because the galvanic site was increased with increasing Sn addition. In Mg-9wt.%Sn alloy, however, the corrosion site were changed from Mg/$Mg_2Sn$ interface to ${\alpha}$-Mg/$M_2Sng$ interface in lamellar structure. Preferentially corrosion of ${\alpha}$-Mg/$M_2Sn$ interface in lamellar structure impeded corrosion propagation went into ${\alpha}$-Mg.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.1004-1012
• /
• 2015

The purpose of this study is to investigate the loess dyeability of soybean fabric using loess as colorants. Recent days, various textile products such as inner wears, sheets and interior goods are manufactured using materials dyed with loess emphasizing its improved metabolism, anti-bacterial, deodorizing properties, and far infrared ray emissions. Soybean fabric was dyed with loess solution according to concentration of loess, dyeing temperature and dyeing time. To improve washing fastness, soybean fabric and dyed soybean fabric with loess were mordanted by mordanting agents such as sodium chloride(NaCl), Acetic acid(CH₃COOH) and Aluminium Potassium Sulfate(AlK(SO₄)₂·12H₂O). Dyeability and color characteristics of dyed soybean fabric were obtained by CCM observation. Particle size distribution of loess, the dyeability(K/S) of soybean fabric, morphology and washing durability of loess dyed soybean fabric were investigated. The results obtained were as follows; Mean average diameter of loess was 1.08µm. The main components of loess used in this study were silicon dioxide(SiO₂), aluminium oxide(Al₂O₃), and iron oxide(Fe₂O₃). The content of these three component was above 75 weight %. The dyeability of soybean fabric was increased gradually with increasing concentration of loess. The optimum dyeing temperature and dyeing time were 90℃ and 60minutes expectively. The fastness to washing according to concentration of loess and mordanting method indicated good grade result as more than 4 degree in all conditions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.3
• /
• pp.45-53
• /
• 1987

The purpose of this research was to study the kinetics of a packed bed aerobic biofilm process. Experiments were carried out by feeding an aerated packed bed reactor with a synthetic wastewater. The reactor packed with glass beads as media had a nominal hydraulic detention time of 5 hours. The flow pattern in the reactor was determined by a tracer test using a NaCl solution to be a completely-mixed type. The results of the research showed that the F/M ratio in the reactor was almost constant since the the biomass increased due to the growth of biofilm as the volumetric organic loading increased. It was also proved theoretically and experimentally that packed bed aerobic biofilm process could be analyzed by the kinetics of completely-mixed activated sludge process with sludge recycle.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.1
• /
• pp.25-32
• /
• 2001

Shoot tips of grape were cultured in uitro and tried to identify optimal culture conditions for regeneration, multiple shoot formation from meristemoid tissue and those subsequent elongation of multi-shoots. Healthy growing shoots were taken in early May, rinsed with running tap water, soaked in a neutral detergent and washed with soft brushing, and washed out with tap water, then sterilized with 10g Ca(ClO)$_2$/140 mL distilled water (Wilson's solution) for 5 min. Survival percentage of the cultures which were sterilized as above procedures was highly increased, compared with the other sterilized method. Propagation of multi-shoots from meristemoid showed a good response in 3/4 strength MS medium enriched with 0.1 mg/L NAA and 3.0 mg/L BA. Shoot elongation from multi-shooting clump well occurred in 3/4 strength MS medium supplemented with 80 mg/L adenine sulfate, 0.1 mg/L NAA and 1.0~2.0 mg/L BA.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2012.05a
• /
• pp.8-8
• /
• 2012

Ginseng have been traditionally used for strengthening immunity, providing nutrition and recovering health from fatigue. Recently, pharmaceutical activities of ginseng roots have been proven by many researches, and ginseng has become a world-famous medicinal plant. Ginseng saponin, ginsenoside, is one of the most important secondary metabolite in ginseng which has various pharmacological activities. Many studies have aimed to convert major ginsenosides to the more active minor ginsenoside Rg3 for consumer demand ginseng product. Microbial strain GS514 strain was isolated from soil around ginseng roots for enzymatic preparation of ginsenoside Rg3, which strain shows strong ability of converting ginsenoside Rb1and Rd into Rg3 in the solution with NaCl. The gene encoding a ${\beta}$-glucosidase from this GS514 was cloned and expressed in the BL21 (DE3) strain of Escherichia coli. The recombinant enzyme was purified and characterized. The molecular mass of purified was 87.5 kDa, as determined by SDS-PAGE. The gene sequence revealed significant homology to the family 3 glycoside hydrolases. The purified single enzyme also catalyzed the conversion of ginsenoside Rb1 into Rg3. This target enzyme will be able to produce as much saponin for consumer demand ginseng product. Anti-apoptotic proteins bind with pro-apoptotic proteins to induce apoptosis mechanism. Over expression of these anti-apoptotic proteins lead to several cancers by preventing apoptosis. Docking simulations were performed for anti-apoptotic proteins with several ginsenosides from Panax ginseng. Our finding shows ginsenosides particularly Rg3, Rh2 and Rf have more binding affinity with apoptotic proteins. Further, these docking system of each ginsenosides can be extended to experimental screen system for further brief confirmations of several diseases.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.85-87
• /
• 2005

This study was conducted to identify the effective dyainage-time influencing rice yield and grain quality on a reclaimed saline soil, the experiment conducted at the Gyehwado substation of the Honam Agricultural Research Institute from 2002 to 2003. The experimental field contained $0.1\%\;and\;0.3\~0.4\%$ NaCl in soil solution, respectively. The experiment involved salinity levels as main plot and sub-plot where consisted of 6 treatments in a split plot design with three replicates. Rice yield performance showed a maximum at drainage-time for 35 days after flowering under medium salinity level, but indicated only $64\%$ of yield level compare to low soil salinity. Percentage of well-shaped rice was high in low soil salinity indicating there aye severe affection for grain quality in medium soil salinity regardless water drainage-time.