• 제목/요약/키워드: NaC_60$

검색결과 956건 처리시간 0.024초

상토에 함유된 Na함량이 오이와 참외의 생육, 광합성 및 잎의 수분상태에 미치는 영향 (Effect of Sodium in Artificial substrate on the Growth, Gas Exchange and Leaf Water Status of Cucumber (Cucumis sativa L.) and Korea Melon(Cucumis melo L.))

  • 서영진;김종수;김찬용;박소득;박만
    • 한국토양비료학회지
    • /
    • 제41권3호
    • /
    • pp.177-183
    • /
    • 2008
  • 상토에 함유된 Na이온이 과채류의 육묘에 미치는 영향을 조사하기 위하여 온도조건에 따른 상토의 수분변화, Na이온 및 EC의 경시적 변화, 광합성율, 증산율, 잎의 수분상태, 묘소질, 생육 및 수량성에 대한 실험을 실시하였다. 육묘온도가 $15^{\circ}C$에서는 상토의 수분감소는 적어 3일이 경과하더라도 관수개시점에 도달하지 않았다. 관수 1시간 후 부터 상토로부터 Na 이온이 유리되어 22시간이 지날 때 까지 Na의 농도가 계속 증가하였으며 Na 함량의 증가에 따라 EC의 상승이 있었다. 또한 관수회수가 증가함에 따라 Na의 세탈에 따른 Na 농도가 감소되었고 Na 농도감소에 비해 EC의 감소폭은 적은 편이었다. 양이온 비율중 Na 함량이 60% 이상일 경우 저온에서는 광합성율, 증산율의 감소가 큰 편이었고 포화수분부족도 또한 저온에서 큰 폭으로 높아졌다. Na 함량이 높은 상토에서 육묘된 오이묘는 초장, 세근수 등이 대조상토에 비해 낮은 편이었고 본포 정식후에도 생육이 불량하여 48%정도의 수량감소를 초래하였다.

아파타이트의 형성에 미치는 티타늄의 표면처리 효과 (Effect of Surface Treatment of Titanium on the Formation of Apatite Crystal)

  • 정회웅;원대희;이민호;배태성
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1998년도 추계학술대회
    • /
    • pp.231-232
    • /
    • 1998
  • The purpose of this study was to examine whether the precipitation of calcium phosphate on titanium surface was affected by surface modification. To improve the bone conductivity, of titanium, samples were devided into 4 groups. Group 1 was immersed in 5M-NaOH solution at $60^{\circ}C$ for 24 hours. Group 2 was immersed in 5M-NaOH solution at $60^{\circ}C $ for 24 hours and heat-treated at $600^{\circ}C$ for 1 hour. Group 3 was anodized in Hanks' solution at 1V, $25^{\circ}C$ for 1 hour. Group 4 was anodized in Hanks' solution at 5V, $80^{\circ}C$ for 5 minutes. And then, all specimens were immersed in the MEM Eagle's medium whose composition was similar to that of extracellular fluid for 30 days. The precipitation of the calcium phosphate on implant surface was increased by the immersion in the NaOH solution, and more highly accelerated by heat treatment at $600^{\circ}C$. The precipitation of the calcium phosphate on titanium implant was increased with the treatment of the anodic oxidation in Hanks' solution at 5V, $80^{\circ}C$.

  • PDF

오이(Cucumis sativus)에 함유된 Hydroperoxide Lyase와 Lipoxygenase 효소 활성 및 특성 (Characteristics of Hydroperoxide Lyase and Lipoxygenase Activity in Cucumber (Cucumis sativus) Fruit)

  • 장미진;조일영;이시경
    • 한국식품과학회지
    • /
    • 제29권2호
    • /
    • pp.314-319
    • /
    • 1997
  • 오이의 향을 결정짓는 휘발성 물질을 형성하는데 연관된 lipoxygenase와 hydroperoxide lyase는 저장 기간, 기질 용액의 pH, NaCl 농도와 온도 변화에 따른 활성을 비교 검토시 매우 유사함이 관찰되었는데, 이는 좋은 오이 향을 최대화하고 유지 보존하는 것이 거의 비슷한 조건이나 환경 안에서 가능함을 시사한다. Hydroperoxide lyase 활성은 pH 5.0일 때 최대치를 보여 주었고, lipoxygenase는 pH 5.5에서 최대 활성을 나타내었다. Hydroperoxide lyase와 lipoxygenase 활성은 $40^{\circ}C{\sim}50^{\circ}C$ 사이에서 안정하였으며, $60^{\circ}C$에서 5분 유지 후 결과는 효소 활성이 약 65%로 감소되었고, 그 이상의 온도에서는 활성도가 급격하게 감소하였다. Lipoxygenase의 활성은 동일 온도에서 비슷한 특성을 나타내었으나 높은 온도에서도 약 3% 정도의 활성을 유지하였다. 그러나 hydroperoxide lyase의 경우에는 높은 온도에서 수분 안에 아무런 활성도 보이지 않음을 알 수 있다. 두 효소의 최대 활성 NaCl 농도는 0.2 M이고, NaCl을 0.2 M까지 첨가시 오히려 NaCl이 없을 때보다 높은 활성을 보였으며 이는 NaCl이 두 효소의 활성을 자극시킴을 보여준다.

  • PDF

$NaBH_4$ 가수분해반응에서 수소 수율에 관한 연구 (Study on the Hydrogen Yield of $NaBH_4$ Hydrolysis Reaction)

  • 황병찬;조재영;신석재;최대기;남석우;박권필
    • Korean Chemical Engineering Research
    • /
    • 제49권5호
    • /
    • pp.516-520
    • /
    • 2011
  • 휴대용 고분자전해질 연료전지의 수소발생용으로써 $NaBH_4$는 많은 장점을 갖고 있다. 본 연구에서는 $NaBH_4$ 가수분해 반응의 수소 수율에 대해 연구하였다. $NaBH_4$ 가수분해 반응의 수소 수율에 미치는 촉매 형태, 온도, $NaBH_4$ 농도, NaOH 농도 등의 영향에 대해 실험하였다. 촉매는 Co-P/Cu, Co-B/Cu와 Co-P-B/Cu를 사용하였는데 이들 촉매 종류에 따라 $NaBH_4$ 가수분해 반응의 수소 수율에 미치는 영향은 거의 없었다. $60^{\circ}C$ 이하의 온도에서 $NaBH_4$ 농도가 증가하면 부산물과 $NaBH_4$에 의해 겔이 형성되면서 가수분해 반응의 수소 수율이 감소였다. 겔 형성에 의해서 $NaBH_4$ 가수분해 반응 속도와 수소 총 발생량이 감소하였다. 안정화제인 NaOH를 첨가하면 겔 형성을 촉진해 수소 수율을 감소시켰다.

Photocatalytic Degradation of Organic Dyes using CdSe-Mn-C60 Nanocomposites

  • Jiulong Li;Jeong Won Ko;Weon Bae Ko
    • Elastomers and Composites
    • /
    • 제57권4호
    • /
    • pp.181-187
    • /
    • 2022
  • CdSe-Mn nanocomposites were synthesized using a microwave method with sodium sulfite (Na2SO3), selenium (Se), cadmium sulfate octahydrate (3CdSO4·8H2O), ammonia solution (NH3·H2O), and manganese (II) sulfate monohydrate (MnSO4·H2O). We obtained CdSe-Mn-C60 nanocomposites by calcining CdSe-Mn nanocomposites and fullerene (C60) in an electric furnace at 700 ℃ for 2 h. X-ray diffraction, Raman spectroscopy, and scanning electron microscopy were used to characterize the crystal structures, lattice vibrations, and surface morphologies of the products, respectively. The photocatalytic activities of the CdSe-Mn-C60 nanocomposites were investigated based on the photocatalytic degradations of organic dyes such as BG, MB, MO, and RhB under ultraviolet (UV) irradiation at 254 nm. UV-visible spectrophotometry was used to confirm the degradation process.

탈지조성에 따른 철강용 알칼리탈지제의 합성 및 특성 (Synthesis and Characteristics of Alkaline Degreasing Agents for Steel Containing Degreasing Components)

  • 박은석;정동진;박홍수;함현식
    • 한국응용과학기술학회지
    • /
    • 제20권2호
    • /
    • pp.81-86
    • /
    • 2003
  • To prepare alkaline degreasing agents(SADAs), tetrasodium pyrophosphate(TSPP), $Na_2CO_3$, Tetronix T-701 (T-701), Na-dioctyl sulfosuccinate(303C), Demol C, and MJU-100A were blended. The prepared degreasing agents were tested with steel specimens and the results were as follows. The degreasing powers of SADA-6($Na_2CO_3$ 50g/TSPP 25g/T-701 10g/303C 15g/Demol C 12g/MJU-100A 8g/water 130g mixture) for press-rust preventing oil were 98% and 99% degreasing at 4wt%, 70 $^{\circ}C$ and 90 $^{\circ}C$, respectively; for quenching oil, the degreasing power of SADA-6 was 92% degreasing at 4wt% and 70 $^{\circ}C$. From these results, it was proved that the SADA-6 exhibits a good degreasing power. Foam heights measured immediately after foaming by Ross & Miles method and Ross & Clark method at 6wt% and 60 $^{\circ}C$ were 16mm and 40mm, respectively. SADA-6 was proved a good low foaming degreasing agent.

알칼리 수용액을 이용한 출토 철지금은장관정의 탈염처리 적용성 평가 (A Study on the Stability of Using Alkali Solution Desalination on Gilt Plated Silver-Iron Artifacts)

  • 박준현;배고운;정광용
    • 보존과학회지
    • /
    • 제37권2호
    • /
    • pp.179-189
    • /
    • 2021
  • 부여 능산리 서고분군에서 출토된 철지금은장관정을 대상으로 도금된 철제유물의 탈염 가능성 및 안정한 탈염방법을 연구하였다. 철지금은장관정은 철을 소지금속으로 하여 은판을 열로 접합시킨 후 그 위에 아말감도금으로 제작한 유물이다. 본 유물은 균열 및 박락된 부위 틈 사이로 철 부식화합물이 다른 재질의 금속(Au, Ag) 표면에 고착되어 있어 탈염이 필요하다고 판단했다. 따라서 금은장부 잔존 상태별로 A·B·C등급으로 분류하고 60℃에서 0.1M 알칼리 용액법인 NaOH법과 S.S.C법으로 탈염을 진행하였다. Cl- 용출량과 탈염기간은 A등급을 제외하고 NaOH법이 S.S.C법보다 더 많은 양을 용출하였고 기간도 더 소요되었다. 탈염 전·후 금은장부의 Fe 성분을 비교하면 B등급을 제외하고 NaOH법이 S.S.C법에 비해 증가폭이 작았으나 NaOH법으로 탈염한 관정 4점의 금은장부가 일부 파손되어 유물의 안정성을 고려했을 때, S.S.C법으로 탈염하는 것이 안정할 것으로 판단된다.

Fabrication of a solid catalyst using coal fly ash and its utilization for producing biodiesel

  • Go, Young Wook;Yeom, Sung Ho
    • Environmental Engineering Research
    • /
    • 제24권2호
    • /
    • pp.324-330
    • /
    • 2019
  • To recycle raw fly ash (RFA), a waste from thermal power plants, it was used to prepare solid catalysts which have many advantages compared with homogenous catalysts. When biodiesel was produced from soybean oil using RFA, only 1.2% of biodiesel conversion was obtained. A metal hydroxide, NaOH, KOH or $Ca(OH)_2$, was mixed with the acid-treated fly ash (ATFA), and the mixture was calcined at $700^{\circ}C$ for 3 h to prepare the solid catalyst. The solid catalyst prepared by mixing ATFA with NaOH, designated as SC-Na, showed a better performance than those prepared by mixing ATFA with KOH or $Ca(OH)_2$, respectively. The optimal mass ratio of ATFA with NaOH was 1:3, at which the proportion of $Na_2O$ increased to 60.2% in SC-Na, and 97.8% of biodiesel conversion was achieved under optimal reaction conditions (2 w% SC-Na relative to oil and 5 mL-methanol/g-oil at $50^{\circ}C$ for 4 h). Finally, a batch operation was repeatedly carried out to test the feasibility of reusing the solid catalyst, and more than 96% biodiesel conversion was stably achieved for the third round of operations. This study shows that RFA was successfully recycled to solid catalysts through a simple preparation method, and the solid catalyst was reused for the production of biodiesel with high conversion.

상이동촉매인 트리카프릴메틸암모니움 클로라이드를 사용한 스티렌 라디칼중합의 동력학적 연구 (The Kinetics of Radical Polymerization of Styrene with Tricaprylymethylammonium Chloride as a Phase-Transfer Catalyst)

  • 박상욱;손인조;박상보
    • 접착 및 계면
    • /
    • 제2권2호
    • /
    • pp.11-19
    • /
    • 2001
  • 트리카프릴메틸 암모니움 클로라이드를 상이동촉매로 사용하여 $Na_2S_2O_8$의 수용액과 톨루엔의 이상계에서 질소분위기하에 $60^{\circ}C$에서 스티렌의 라디칼중합을 행하였다. 중합시의 초기 중합속도는 촉매와 $Na_2S_2O_8$의 초기공급 농도보다는 수용액 상에서의 4급 암모늄양이온과 퍼록시디슬페이트 음이온의 농도로 나타낼 수 있었다. 관찰된 초기중합속도를 사용하여 분균일 액-액계에서의 순환 상이동에 의한 개시과정을 포함한 중함메카니즘을 밝힐 수 있었다. 폴리스티렌의 점도평균분자량은 $Na_2S_2O_8$의 농도에 역비례하였는데, 라디칼 중합메카니즘에 의하여 $[Q^+]([S_2O{_8}^{2-}]{\alpha}_2)^{1/2}$로 나타내어졌다.

  • PDF

구리 촉매 상에서 C9-알데히드의 수소화 반응에 의한 C9-알코올 합성 (Synthesis of C9-Alcohol through C9-Aldehyde Hydrogenation over Copper Catalysts)

  • 박영권;노상균;조규상;전종기
    • Korean Chemical Engineering Research
    • /
    • 제44권4호
    • /
    • pp.363-368
    • /
    • 2006
  • $C_9$-알데히드를 수소화하여 $C_9$-알콜을 제조하는 공정에 사용하기 위한 최적의 촉매를 선정하고, $C_9$-알콜의 수율을 극대화하기 위한 운전 조건을 확립하기 위한 실험을 수행하였다. 구리 전구체로 acetate를 사용하고 침전제로 $Na_2CO_3$를 사용하여 제조한 $CuO/ZnO/Al_2O_3$(60:30:10 wt%) 촉매의 표면적 및 구리 비표면적이 가장 우수하였으며 $C_9$-알데히드 수소화 반응에서도 가장 우수한 성능을 보였다. 최적화된 촉매를 장착한 trickle bed 반응기를 사용하여 $175^{\circ}C$, 800 psi, $WHSV=3hr^{-1}$의 조건에서 94.1 wt%의 $C_9$-알콜 수율을 얻었다. 알데히드의 수소화 반응에 사용되는 다른 촉매들과 비교한 결과 Ni/kieselghur 촉매와 유사한 성능을 보였으며 $Cu-Ni-Cr-Na/Al_2O_3$ 촉매 및 $Ni-Mo/Al_2O_3$ 촉매의 경우보다 우수한 성능을 보이는 것을 확인하였다. 장기 촉매 테스트를 통해서 촉매의 안정성을 확인한 결과 약 72시간 이후에는 고비점 부산물의 생성량 증가로 인하여 $C_9$-알콜의 수율이 약간씩 감소하였다.