• Title/Summary/Keyword: NaCN

Search Result 113, Processing Time 0.022 seconds

Synthesis of Trifoliate Orange Extract Having Anti inflammation Activities (항염증 활성을 갖는 탱자 추출물 합성)

  • Kim, Duck-Sool;Roh, Eon-Joo
    • Journal of the Korean Applied Science and Technology
    • /
    • v.28 no.2
    • /
    • pp.196-202
    • /
    • 2011
  • Coumarin derivatives were shown to possess valuable pharmacological properties such as anticancer/anti carcinogenic, anti-inflammatory, anti helicobacter, anti genotoxic, neuroprotective and dietary effect. In this study, novel coumarin derivatives structurally related to 7-geranyloxycoumarin were effectively synthesised in good yields by $Cs_2CO_3$/acetonitrile in mild condition. The synthesis of geranyloxycoumarin derivatives in weak base($Na_2CO_3$, $K_2CO_3$, $Cs_2CO_3$ etc)/$CH_3CN$ at room temperature obtained in good yield. On the other hand, the reaction of geranyloxycoumarin formation in strong base(NaOH, KOH, CsOH etc)/$CH_3CN$ at reflux condition obtained in low yield.

The Effects of Stabilizers on Adhesion of Electroless Copper Deposits on Alumina (Alumina 소지상의 무전해 동도금층의 밀착력에 미치는 안정제의 영향)

  • 최순돈;이희록
    • Journal of the Korean institute of surface engineering
    • /
    • v.29 no.2
    • /
    • pp.109-119
    • /
    • 1996
  • In order to improve adhesion of electroless copper deposits on alumina substrates, some stabilizers such as 2-Mercapto Benzothiazole, thiourea and NaCN were added over a wide range of concentrations. The adhesion tests of the deposits were performed by using the cellophane tape and the push-pull scale. With the minor addition of the stabilizers, 2-MBT having a large molecular size gives poor adhesion, together with a finer grain structure, whereas Thiourea and NaCN show a high mechanical strength of the deposits. The high mechanical strength is supposed to be due to the easy desorption of hydrogen gas generated from the electroless reactions. A large amount of the three stabilizers decreases the adhesion for all the cases, resulting from strong adsorption of the stabilizers to the substrates.

  • PDF

Growth and Cyanide Degradation of Azotobacter vinelandii in Cyanide-Containing Wastewater System

  • Koksunan, Sarawut;Vichitphan, Sukanda;Laopaiboon, Lakkana;Vichitphan, Kanit;Han, Jaehong
    • Journal of Microbiology and Biotechnology
    • /
    • v.23 no.4
    • /
    • pp.572-578
    • /
    • 2013
  • Azotobacter vinelandii, a strict aerobic nitrogen-fixing bacterium, has been extensively studied with regard to the ability of $N_2$-fixation due to its high expression of nitrogenase and fast growth. Because nitrogenase can also reduce cyanide to ammonia and methane, cyanide degradation by A. vinelandii has been studied for the application in the bioremediation of cyanide-contaminated wastewater. Cyanide degradation by A. vinelandii in NFS (nitrogen-free sucrose) medium was examined in terms of cell growth and cyanide reduction, and the results were applied for cyanide-contaminated cassava mill wastewater. From the NFS medium study in the 300 ml flask, it was found that A. vinelandii in the early stationary growth phase could reduce cyanide more rapidly than the cells in the exponential growth phase, and 84.4% of cyanide was degraded in 66 h incubation upon addition of 3.0 mM of NaCN. The resting cells of A. vinelandii could also reduce cyanide concentration by 90.4% with 3.0 mM of NaCN in the large-scale (3 L) fermentation with the same incubation time. Finally, the optimized conditions were applied to the cassava mill wastewater bioremediation, and A. vinelandii was able to reduce the cyanide concentration by 69.7% after 66 h in the cassava mill wastewater containing 4.0 mM of NaCN in the 3 L fermenter. Related to cyanide degradation in the cassava mill wastewater, nitrogenase was the responsible enzyme, which was confirmed by methane production. These findings would be helpful to design a practical bioremediation system for the treatment of cyanide-contaminated wastewater.

항 바이러스 작용이 기대되는 Uridine의 2′,3′-Seco 유도체의 합성

  • 천문우;양재욱;이정원;송선용
    • Proceedings of the Korean Society of Applied Pharmacology
    • /
    • 1994.04a
    • /
    • pp.222-222
    • /
    • 1994
  • 목적하는 화합물인 2',5'-dihydroxy-3'-무치환 유도체(1)는 uridine을 sodium metaperiodate로 산화하여 dialdehyde를 얻은다음 1,2-dianilinoethane으로 3'-aldehyde만을 선택적으로 보호, 2'-aldehyde를 NaBH$_4$로 환원, alcohol로 하여 deprotection 하므로서 hemiacetal율 얻는다. 이 hemiacetal을 TsSNHHNH$_2$로 처리하여 목적하는(1) 화합물을 얻었으며 2-azido-5-Hydroxy-3'-무치환 유도체(2)는 (1)화합물 합성시 얻은 hemiactal을 출발 물질로 하여 먼저 TBDPSCl로 silyaltion하여 5'-hydroxyl group을 보호하고 TsNHNH$_2$로 3'-위치를 hydrazone으로 한다음 NaB(CNH$_3$로 처리하여 얻은 hydrazide를 NaOAc를 반응시켜 2'-hydroxy-3'-무치환-5'-silyl 유도체를 얻고 또한 2',3'-dihydroxy group을 tosyl화, azido화, 5'-silyl group을 deprotection 하므로서 (2)를 얻었다. 또한 2',3'-dihydroxy-5'-무치환 유도체(4)는 uridine의 2',3'-위치를 먼저 protection, 5'-위치를 benzoyl화 2',3'-deprotection, periodate oxidation하여 얻은 diol을 silyl화 한 다음 5'-위치를 benzoyl화, 2',3'-deprotection, 산화하여 얻은 hemiacetal의 silyl group을 제거한후 primary hydroxyl group만을 선택적으로 silyl화, TsNHNH$_2$, NaB(CN)H$_3$ 및 NaOAc로 처리하므로서 얻은 2'-hydroxy-3'-0-silyl group-5'-무치환 화합물을 tosyl, azido화 한다음 desilylation하여 얻었다. 목적하는(1) 화합물의 diasteromer 인 2',3'-dihydroxy-5'-무치환 유도체(3)는 (4)화합물 합성시 얻은 hemiactal을 key intermediate로 하여 TsNHNH$_2$, NaB(CN)H$_3$ 및 NaOAc로 처리하므로서 얻을수 있었다. 이들 화합물들의 각종 DNA 및 RNA virus에 대한 항 바이러스작용을 검토한 결과 현저한 항 바이러스 작용을 나타내지 않았다.

  • PDF

A New Combined Source of "CN" from N,N-Dimethylformamide and Ammonia in the Palladium-Catalyzed Cyanation of Aryl C-H Bonds

  • Choi, Ji-Ho;Kim, Jin-Ho;Chang, Suk-Bok
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.08a
    • /
    • pp.207-207
    • /
    • 2011
  • Aromatic nitriles possess versatile utilities and are indispensible not only in organic synthesis but also in chemical industry. In fact, the nitrile group is an important precursor for various functional groups such as aldehydes, amines, amidines, tetrazoles, amides, and their carboxyl derivatives. Representative methods for the preparation of organonitriles with cyanide-containing reagents are the Sandmeyer and Rosenmund-von Braun reactions. Recently, a catalytic route to aryl nitriles has been reported on the basis of the chelation-assisted C-H bond activation or metal-catalyzed cyanation of haloarenes. In those cyanation protocols, the "CN" unit is provided from metal-bound precursors of MCN (M=Cu, K, Na, Zn), TMSCN, or K3Fe(CN)6. Additionally, it can be generated in situ from nitromethane or acetone cyanohydrin. Herein, we report the first example of generating "CN" from two different, readily available precursors, ammonia and N,N-dimethylformamide (DMF). In addition, its synthetic utility is demonstrated through the Pd-catalyzed cyanation of arene C-H bonds.

  • PDF

Impact of Tofu Paste and Non-starch Polysaccharides on Oil Uptake Reduction in Cake Doughnuts (케이크 도넛의 흡유저감에 대한 두부 페이스트와 비전분성 탄수화물 고분자의 영향)

  • Jung, Gil-Young;Lee, Hyeon-Jeong;Ko, Eun-Sol;Kim, Hyun-Seok
    • Food Engineering Progress
    • /
    • v.21 no.1
    • /
    • pp.72-78
    • /
    • 2017
  • The objective of this study was to investigate the effects of combinations of tofu paste and non-starch polysaccharides (NSP) on the oil uptake reduction (OTR) of deep-fat fried cake doughnuts. OTR agents were tofu paste (from grinding tofu with deionized water, followed by passage through a 60 mesh sieve), and five neutral and nine anionic NSPs. A control doughnut (without tofu paste or NSP), tofu doughnut (with tofu paste) and NSP-tofu doughnut (with tofu paste and NSP) were prepared. The moisture and total lipid (TL) content, cross-section image, color characteristic, and specific volume were measured. The tofu and NSP-tofu doughnuts exhibited higher moisture and lower TL content than the control. OTR was 10.8% for the tofu doughnut, and between 13.2% and 41.2% for the NSP-tofu doughnut. The highest OTR (41.2%) was found in the NSP-tofu doughnut with a combination of tofu paste and sodium alginate (NaA). The specific volume of the NSP-tofu doughnuts with combinations of tofu paste with NaA (2.5 mL/g), locust bean gum (2.5 mL/g), and ${\kappa}$-carrageenan (2.4 mL/g) was very close to that of the control (2.6 mL/g). Considering the OTR and specific volume of doughnuts, the combination of tofu paste and NaA would be most effective in reducing the oil uptake of doughnuts during deep-fat frying.

DC 반응성 스퍼터링법으로 증착한 TiN/Al, TiCN/Al 박막의 전기적.기계적 특성 및 내부식성 평가

  • Lee, Hyeon-Jun;Song, Pung-Geun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2012.08a
    • /
    • pp.346-347
    • /
    • 2012
  • 최근 화석연료 대체 에너지원으로서 자동차용으로 연구 개발 및 응용되고 있는 고분자 전해질 연료전지(PEMFC: Proton exchange membrane fuel cells)에서 분리판(Bipolar Plate)은 스택 전체 무게의 80%, 스택 가격의 60% 정도로 가장 높은 비중을 차지한다. 분리판은 연료와 산화제를 공급해주는 통로 및 전지 운전 중에 생성된 물을 제거하는 통로 역할과 anode, cathode로서 전극 역할을 통해 스택 전력을 형성하는 핵심 기능과 전지와 전지 사이의 지지대 역할을 한다. 따라서 분리판은 전기전도성, 내부식성 및 기계적 특성이 우수해야함은 물론이고, 얇고 가벼우며 가공성이 뛰어나야 한다. 현재 가장 많이 사용되고 있는 금속 분리판 소재 중 스테인리스 스틸은 전기적, 기계적 특성 및 내부식성이 우수한 반면, 가격이 비싸고, 중량이 무거운 단점이 있다. 따라서 본 연구에서는 DC 반응성 마그네트론 스퍼터링법으로 전기적, 기계적 특성 및 내부 식성이 우수한 TiN, TiCN 박막을 스테인리스에 비해 중량이 1/3, 소재 단가가 1/4인 알루미늄 기판 위에 증착하여 박막 물성을 평가하였다. DC Power는 400 W, 기판과 타겟 사이의 거리는100 mm, 공정 압력은 0.5 Pa로 고정하였고, 3 inch의 지름과 순도 99.95%를 갖는 티타늄 타겟을 사용하였다. 공정 가스는 Ar을 주입하였으며, 질소와 탄소의 공급원으로는 질소($N_2$)와 메탄($CH_4$) 가스를 사용하여 챔버 내 주입혼합가스의 전체 유량을 50 sccm으로 고정시켰다. 증착된 박막의 전기적, 기계적 특성을 측정하였고, X-ray diffraction (XRD), Scanning electron microscope (SEM)을 이용하여 박막의 미세구조 및 표면 상태를 확인하였다. 또한, 내부식 특성을 평가하기 위해 potentiostatic, potentiodynamic 법을 이용하여 박막의 부식저항을 측정하였다. 증착된 TiN 박막의 경우 질소 함량의 증가에 따라 박막 증착속도는 감소하는 경향을 보였다. 이는 타겟 부근의 질소 라디칼 비율이 증가함에 따라 질화반응이 촉진된 것으로 생각된다. 또한, 증착된 TiN과 TiCN 박막은 반응성 질소 유량과 탄소 유량에 따라 각각 다른 미세구조를 가지는 것을 확인하였다. TiN과 TiCN은 NaCl형의 면심입방격자(FCC)로 같은 구조이며, 격자상수가 비슷하여 전율고용되어 TiCN을 형성하고, 탄소와 질소의 비에 따라 전기적 기계적 특성이 달라짐을 확인하였다.

  • PDF

Study of the Effects of Sodium Chloride on Segregation-Distorter Action in D. melanogaster: 4. Treatment of Sodium Chloride on the Pupal Stages

  • Chung, Yong-Jai;Kang, Moon-Ju
    • The Korean Journal of Zoology
    • /
    • v.14 no.3
    • /
    • pp.125-131
    • /
    • 1971
  • In order to see if NaCl affected the the emergence rate and the SD action when treated it at the pupal stage of Drosophila melanogaster, an experiment was performed in which the resistibility to NaCl at the pupal stage was examined by the emergence rate and the effects of NaCl on the SD action was studied by k values. The four SD strains and two other strains (cn bw and Oregon-R) were used and NaCl media were prepared by adding NaCl at a concentration of 0.0M, 0.1M, 0.3M, 0.5M, 0.7M, and 1.0M to the standard media for the present experiment. The following conclusions were established: 1. The emergence rate (resistibility to NaCl) when treated NaCl at the pupal stage is significantly different not only among the strains but also among concentrations of NaCl. 2. The emergence rate decreases as concentration of NaCl increases but the rate of decrease shows rather constant so that the curves of decrease are not steep. 3. The emergence rate of the cn bw and Oregon-R strains shows higher value than of the four SD strains, implying that the resistibility to the NaCl is lower in the SD strains than in the two strains; not a few flies are emerged from the media of 1.0M of NaCl. 4. The difference in k values is not significant among concentrations of NaCl but among strains, the k values of the original SD strains are rather higher and constant but those of the recombinant SD strains are rather low and unstable. 5. The SD action is not affected by NaCl as far as once emerged from the culture media whether containing NaCl or not in any developmental stage. Thus such an experiment on NaCl effect is of little value to analyze the mechanism of the SD action in D. melanogaster.

  • PDF

Nanocomposite Coating with TiAlN and Amorphous Carbon Phases Synthesized by Reactive Magnetron Sputtering

  • Kim, Bom Sok;Kim, Dong Jun;La, Joung Hyun;Lee, Sang Yong;Lee, Sang Yul
    • Korean Journal of Metals and Materials
    • /
    • v.50 no.11
    • /
    • pp.801-808
    • /
    • 2012
  • TiAlCN coatings with various C contents were synthesized by unbalanced magnetron sputtering. The characteristics, the crystalline structure, surface morphology, hardness, and friction coefficient of the coatings as a function of the C content were investigated by X-ray diffraction (XRD), atomic force microscopy (AFM), a microhardness tester, and a wear test. In addition, their corrosion behaviors in a deaerated 3.5 wt% NaCl solution at $40^{\circ}C$ were investigated by potentiodynamic polarization tests. The results indicated that the $Ti_{14.9}Al_{15.5}C_{30.7}N_{38.9}$ coating had the highest hardness, elastic modulus, and a plastic deformation resistance of 39 GPa, 359 GPa, and 0.55, respectively, and it also had the lowest friction coefficient of approximately 0.26. Comparative evaluation of the TiAlCN coatings indicated that a wide range of coating properties, especially coating hardness, could be obtained by the synthesis methods and processing variables. The microhardness of the coatings was much higher than that from previously reported coating using similar magnetron sputtering processes. It was almost as high as the microhardness measured from the TiAlCN coatings (~41 GPa) synthesized using an arc ion plating process. The potentiodynamic test showed that the corrosion resistance of the TiAlCN coatings was significantly better than the TiAlN coatings, and their corrosion current density ($i_{corr}$), corrosion potentials ($E_{corr}$) and corrosion rate decreased with an increasing C content in the coatings. The much denser microstructure of the coatings due to the increased amount of amorphous phase with increasing C contents in the coatings could result in the the improved corrosion resistance of the coatings.