• Membrane Journal
• /
• v.22 no.5
• /
• pp.318-325
• /
• 2012

PTMSP-PMMH-NaY zeolite composite membranes were prepared by the addition of 10, 20, 30, and 40 wt% NaY zeolite contents to PTMSP containing 20 wt% PMMH dendrimer. To investigate the physico-chemical characteristics of composite membranes, the analytical methods such as FT-IR, TGA, and SEM have been utilized, and the gas permeability and selectivity properties of hydrogen and nitrogen were evaluated. The permeability of the PTMSP-PMMH-NaY zeolite composite membranes increased as NaY zeolite content increased, the permeabilities of hydrogen and nitrogen gases were observed being 3,950~592,000 barrer and 1,550~143,000 barrer, respectively. Simultaneously, selectivity of hydrogen against nitrogen did not show a discernible difference at 0~30 wt% range of NaY zeolite contents and increased from 2.2 to 4.2 at 30~40 wt% range.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.1
• /
• pp.42-53
• /
• 1999

A study on the synthesis of zeolite from coal fly ash from power plant was carried out to reduce environmental problems and reuse industrial waste. The synthesized zeolite was proved to be Zeolite 4A type by means of the XRD and SEM analysis, and then the synthesized zeolite was used as an absorbent to remove the $NH_4^+$ ions in the wastewater and water. In the ion exchange of single $NH_4^+$ ions by the natural zeolite and the synthesized zeolite, the ion exchange reached equilibrium within 10 min. and 1hr, respectively. The amount of ion exchanged $NH_4^+$ to the unit weight of natural zeolite and zeolite 4A were 1.09 and 3.54 meq/g respectively, and the amount of $NH_4$ ion exchanged by the synthesized zeolite was higher than by the natural zeolite. The ion exchange kinetics fitted very well to the Feundlich and Langmuir isotherm. The effects of coexisting cations on the ion-exchange properties of zeolites were studied in order to apply them to water treatment. In the bisolute-system of the $NH_4^+-K^+$ and $NH_4^+-Na^+$ systems, the ion exchange capacity was smaller than the single $NH_4^+$ ion system. The effects of coexisting cations on the ion exchange system by the natural zeolite and the synthesized zeolite were found to be $K^+>Na^+$ and $Na^+>K^+>>Mg^{2+}>Ca^{2+}$, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.5
• /
• pp.407-410
• /
• 1990

Three binary ion-exchange isotherms of zeolite A have been determined using 0.1 M solutions of the aqueous nitrates for the one-step preparation of particular mixed-cation zeolite A compositions. Analyses were done primarily by flame emission spectrometry (FES), together with crystallographic determinations of $Cs^+$ and colorimetric determinations of $NH_{4^+}$. Corrections for a presumed impurity of extra-lattice species in powder sample were made for the determination of $Na^+$. The $Cs^+-Ag^+$ isootherm indicates a strong selectivity for $Ag^+$ through the entire range of zeolite composition. The $Ag^+-Na^+$ isotherm agrees very closely with that reported by Sherry and Walton, and that of $NH_{4^+}-Na^+$ resembles those obtained using zeolite pellets.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.243-248
• /
• 2005

Membrane pervaporation processes could have advantages over distillation for separation of water/organics mixtures: a low energy demand and the ability to separate azeotropic mixtures or isomers. Zeolite membranes might show better thermal, mechanical and chemical stabilities than polymer membranes. Water could be effectively separated from water/organic mixtures using the NaA zeolite membrane because of its high hydrophilicity. In this study, water was separated by pervaporation using the NaA zeolite membrane from water/ethanol mixtures. As a mole fraction of ethanol increased, the total permeation flux and the water flux decreased while the separation factor increased, reached a maximum point, and decreased. As an experimental temperature increased, the total permeation flux increased while the separation factor increased at the lower mole fraction of ethanol than 0.8 and it decreased at the higher mole fraction of ethanol than 0.8. The total permeation flux and the separation factor could be maintained constant during the long term experiment longer than 160 hours. It was found that the NaA zeolite membrane synthesized in our study showed better performance on water/ethanol separation than that of a distillation process or PVA polymeric pervaporation membranes.

• Clean Technology
• /
• v.26 no.4
• /
• pp.263-269
• /
• 2020

Zeolite was synthesized hydrothermally using the water-treatment sludge, and the effects of various synthesis parameters like reaction temperature, reaction time, and Na2O/SiO2 molar ratio on the crystallization of zeolite were investigated. Crystal structure, physical property, and thermal stability of zeolite crystals were characterized by X-ray powder diffraction, FTIR spectroscopy, BET nitrogen adsorption, and TGA measurements. The removal efficiencies of nitrogen in ammonia, heavy metal ions, and TOC were calculated to evaluate zeolite's adsorption capacity. The primary chemical composition of water-treatment sludge was 28.79% Al2O3 and 27.06% SiO2. The zeolites were synthesized by merely employing the water-treatment sludge as silica and alumina sources without additional chemicals. Zeolite crystals synthesized through the water-treatment sludge were confirmed as an A-type zeolite structure. Zeolite A had the highest crystallinity obtained from a gel with the molar composition 2.1Na2O-Al2O3-1.6SiO2-65H2O after 5 h at a temperature of 90 ℃. The specific surface area of zeolite obtained was 55 ㎡ g-1, which was higher than commercial zeolite A. The removal efficiency of nitrogen in ammonia was 68% after 3 h of reaction time, while the removal efficiencies of Pb2+ and Cd2+ ions were 99.1% and 99.3%, respectively. These results indicate active ion exchange between Pb2+ or Cd2+ ion and Na+ ion in the zeolite framework. The adsorption experiments on the different zeolite addition conditions were performed for 3 h with 300 ppm humic acid. Based on the results, TOC's highest efficiency was 83% when 5 g of zeolite was added.

• Journal of the Korean Ceramic Society
• /
• v.43 no.1 s.284
• /
• pp.1-3
• /
• 2006

Well-shaped NaA zeolite cubic crystals of a large size of $5-7{\mu}m$ were synthesized by a hydrothermal method in a mother solution having a $3.55Na_2O:Al_2O_3:1.6SiO_2:593\~2000H_2O$ composition. Thermal treatment of NaA zeolite crystals resulted in the formation of a crystalline phase of $NaAlSiO_4-Camegeite$ between 800 and $900^{\circ}C$. Even at $1000^{\circ}C,\;NaAlSiO_4$ phase was found as a major product. Environmental Scanning Electron Microscopy (ESEM), High Resolution Transmission Electron Microscopy (HRTEM), X-Ray powder Diffraction (XRD), Fourier Transform Infrared (FT-IR) spectroscopy, and DTA/TGA and BET analyses were used to characterize the initial materials and the obtained products after various heat treatments.

• Journal of Environmental Science International
• /
• v.27 no.5
• /
• pp.299-308
• /
• 2018

The adsorption characteristics of Cu ions were studied using the zeolite Na-A synthesized from Jeju volcanic rocks. The effects of various operating parameters such as initial concentration of Cu ions, contact time, solution pH, and solution temperature were investigated in batch experiments. The adsorption of Cu ions by Na-A zeolite was fitted well by pseudo-second-order kinetics and the Langmuir isotherm model. The maximum adsorption capacity determined using the Langmuir isotherm model was 152.95 mg/g. In addition, the adsorption of Cu ions by zeolite Na-A was primarily controlled by particle diffusion model in comparison with the film diffusion model. As the temperature increased from 303 K to 323 K, ${\Delta}G^o$ decreased from -2.22 kJ/mol to -3.41 kJ/mol, indicating that the adsorption of Cu ions by Na-A zeolite is spontaneous process.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.49-58
• /
• 1997

A study on the synthesis of zeolite from bituminous coal ESP fly ash as a raw material, which was emitted from the power plant, was carried out to reduce environmental problems and reuse of the industrial wastes. Bituminous coal fly ash was used as the source of silica and alumina. Zeolite was synthesized by hydrothermal reaction in aqueous NaOH solution with sodium aluminate as additive. The objective of this study is to elucidate the effect of several experimental variables on the synthesis of zeolite. The effects of preroasting temperature, mixing speed, leaching alkalinity, and molar ratio of Na$_{2}$O/SiO$_{2}$ and SiO$_{2}$/Al$_{2}$O of the products were investigated. The synthesized zeolite was proved to be NaA, which is known as 4A type, by comparing with SEM images, and X-ray diffraction analysis. And also we know that the transformation of zeolite A take places into other types of zeolites, i.e. Hydroxysodalite, zeolite P, with the variation of leaching alkalinity.

• Membrane Journal
• /
• v.25 no.1
• /
• pp.27-31
• /
• 2015

PEBAX[poly(ether-block-amide)]-NaY zeolite composite membrane was studied on the permeability of penetrant $H_2$, $N_2$, $CO_2$ and $CH_4$ and the selectivity. When the NaY zeolite contents of PEBAX-NaY zeolite membranes were increased, the permeability of $H_2$ was increased, but the permeability of $N_2$, $CH_4$ and $CO_2$ was decreased. By the addition of NaY zeolite into PEBAX, the gas selectivity for $H_2$, $N_2$ and $CO_2$ was decreased except the increase of selectivity of $H_2/N_2$. $CO_2/N_2$, $H_2/CO_2$ and Gas/$CH_4$. The highest selectivity among these gases was from $CO_2$. In particular, the gas selectivity for $CO_2$ was the greatest with a value of 12~156.

• Korean Membrane Journal
• /
• v.8 no.1
• /
• pp.21-30
• /
• 2006

A faujasite NaY zeolite membrane was prepared on a tubular ${\alpha}-Al_2O_3$ support by the secondary growth process, and effects of permeation test conditions on the $CO_2/N_2$ separation were investigated. A NaY zeolite membrane with good $CO_2/N_2$ separation was successfully synthesized by using the hydrothermal solution ($Al_2O_3:SiO_2:Na_2O:H_2O$ = 1:6:14:840 in a molar base): at a permeation temperature of $30^{\circ}C$, its $CO_2$ permeance and $CO_2/N_2$ separation factor were $2.5{\times}10^{-7}mol/m^2secPa$ and 34, respectively. The $CO_2$ and $N_2$ permeations were highly dependent on permeation test conditions (feed composition, feeding rate, feed pressure, He sweeping rate and permeation temperature). The results indicated that (i) $CO_2$ and $N_2$ permeations through NaY zeolite membrane are governed by surface and micropore diffusions, respectively, (ii) the preparation of NaY zeolite membrane with a large permeating area is one of the most difficult hurdles for its real applications, and (iii) the retardation of $N_2$ permeation is an effective key to improve $CO_2/N_2$ separation factor in NaY zeolite membrane.