• 한국세라믹학회지
• /
• 제18권2호
• /
• pp.91-98
• /
• 1981

Synthetic zeolite A was prerared from domestic Hadong kaolin with sodium hydroxide solution and their ion exchange isotherms of $K^+$, $NH^{4+}$, $Li^+$ and $Ag^+$ ion were presented. The optimum reaction conditions for synthetic zeolite A from calcinated kaolin were 2 fold excess of 2N sodium hydroxide solution, 10$0^{\circ}C$ and 8 hours. It was observed that before the crystallization of zeolite A the samples reacted with sodium hydroxide solution had rather higher ion exchange capacities than zeolite A. The $K^+$-$Na^+$ and $Ag^+$$Na^+$ ion exchange isotherms were signoidal. The initial selectivity series was in the order $Ag^+$$K^+$>$Na^+$>$NH_4$>$Li^+$. Between approximately 33 and 67% replacement of soium ions the selectivity series became $Na^>$ and above 67% became $Ag^+$>$K^+$. Evidence were also presented to demonstrate that 8 out of 12 sodium ions per pseudo unit cell were not easily replaceable by lithium ions and 4 out of 12 not easily replaceable by ammonium ions.

• 멤브레인
• /
• 제12권3호
• /
• pp.158-164
• /
• 2002

본 연구에서는 반도체 세정공정에서 발생되는 IPA를 재활용하기 위하여 NaA 제올라이트 막을 이용한 투과증발 공정을 검토하기 위한 기초실험을 수행하였다. 공정에 사용한 NaA 제올라이트 막은 전 농도 범위에서 우수한 분리성능을 보였고, 고온조작에서도 분리성능이 매우 우수하였다. 조작온도 50에서 공급원액의 농도가 90 wt%일 때, 투과유속은 약 $1,500 g/m^2/hr$분리계수는 1,000 이상을 얻을 수 있었다. 또한, 연속조작에서 IPA의 탈수농축에 따른 평균 투과유속은 약 $1,000 g/m^2/hr$를 얻을 수 있었다.

• Korean Chemical Engineering Research
• /
• 제45권2호
• /
• pp.160-165
• /
• 2007

Low Silica X (LSX) 제올라이트를 합성하여 질소 흡착 반응에 적용하였으며, 기존의 상용화된 질소흡착용 제올라이트와 질소 흡착 성능 및 그 특성을 비교하였다. LSX 제올라이트의 제조 변수로 젤 상태에서의 $Na_2O/(Na_2O+K_2O)$비와 결정화 시간을 고려하였다. $Na_2O/(Na_2O+K_2O)$ 비가 0.75일 때 LSX 제올라이트가 합성됨을 XRD, SEM 분석으로부터 확인하였다. 합성된 LSX 제올라이트는 같은 faujasite 구조를 갖는 NaY나 NaX 제올라이트보다 Si/Al 비가 작고 거의 1에 수렴함을 XRF와 FT-IR 결과로부터 확인하였다. 1A(Li, Na, K), 2A(Mg, Ca, Ba) 족 양이온으로 교환된 LSX 제올라이트에 대해 질소 흡착 테스트를 수행한 결과, 양이온의 전하밀도가 증가할수록 질소 흡착량이 증가하였으며, LiLSX의 경우 질소 흡착량이 가장 많았다. LiLSX의 $Li^+$ 이온 함량을 변화시켜 가며 질소 흡착량을 측정한 결과 Li/Al 비가 0.65 이상일 때, 질소 흡착량이 급격히 증가하였다. $Li^+$ 이온은 제올라이트 세공 내의 supercage(site III, III') 에 위치할 때, 질소 흡착점의 역할을 하였다. LiLSX 제올라이트에 $Ca^{2+}$ 이온을 이온교환시킨 결과 질소 흡착 성능이 더 향상되었는데, Ca/Al의 비가 0.26일 때 질소 흡착 성능이 가장 좋았다. LiCaLSX(Ca/Al=0.26) 제올라이트는 기존의 상용 NaX 제올라이트보다 질소 흡착 성능이 우수하였다.

• 한국환경과학회지
• /
• 제28권6호
• /
• pp.553-559
• /
• 2019

In this study, zeolitic materials at $Na_2CO_3/CFA$ ratio of 0.6 - 1.8 were synthesized from coal fly ash from a thermal power plant using a fusion/hydrothermal method. The zeolitic materials were found to have cubic crystals structure and X-ray diffraction (XRD) peaks of Na-A zeolite by XRD and SEM analysis. When the zeolitic materials were synthesized from the coal fly ash, the XRD peaks of the zeolitic materials at $Na_2CO_3/CFA$ ratios of 0.9-1.8 had the same location as the XRD peaks of commercial Na-A zeolite. The XRD peaks of the Na-A zeolite ($Na_{12}Al_{12}Si_{12}O_{48}27.4H_2O$) were confirmed in the $2{\theta}$ in the range of 7.18-34.18. However, it was also confirmed that peaks of $CaCO_3$, an impurity inhibiting synthesis of Na-A zeolite from CaO and $Na_2CO_3$ in the coal fly ash, occurred in the XRD peaks of the zeolitic materials at $Na_2CO_3/CFA$ ratio of 1.5-1.8. The crystallinities of the zeolitic materials tended to increase gradually within the $Na_2CO_3/CFA$ ratio range of 0.6-1.8.

• Membrane and Water Treatment
• /
• 제8권5호
• /
• pp.437-448
• /
• 2017

A high quality Na-X zeolite membrane was synthesized on a seeded ${\alpha}-alumina$ disc by the secondary growth method. Structural characterization was done by X-ray spectroscopy, FT-IR spectroscopy, SEM and AFM imaging. The performance evaluation of the membrane was firstly tested in separation of glucose/water solutions by pervaporation process. There was obtained a separation factor $182.7{\pm}8.8$, while the flux through the membrane was $3.6{\pm}0.3kg\;m^{-2}\;h^{-1}$. The zeolite membrane was then used for desalination of aqueous solutions consisting of $Na^+$, $Ca^{2+}$, $Cs^+$ and $Sr^{2+}$ because of the importance of these ions in water and wastewater treatments. The effects of some parameters such as temperature and solution concentration on the desalination process were studied for investigating of diffusion/adsorption mechanism in membrane separation. Finally, high water fluxes ranged from 2 up to $9kg\;m^{-2}\;h^{-1}$ were obtained and the rejection factors were resulted more than 95% for $Na^+$ and $Ca^{2+}$ and near to 99% for $Cs^+$ and $Sr^{2+}$. Based on the results, fluxes were significantly improved due to convenient passage of water molecules from large pores of NaX, while the fouling was declining dramatically. Based on the results, NaX zeolite can efficiently use for the removal of different cations from wastewaters.

• 대한화학회지
• /
• 제16권4호
• /
• pp.249-256
• /
• 1972

하동 kaolin을 NaOH용액으로 처리하여 그의 결정성을 X-선 분말회절법으로 조사하였다. 각 결정 생성의 최적 처리 조건은 다음과 같다. <표> Sodium A zeolite 결정 생성을 위해 적당한 $Na_2O 대 SiO_2$의 비는 0.5${\sim}$1.5이다. 생성된 Sodium A zeolite 의$ 25^{\circ}C$, 0.2N $CaCl_2$ 용액에서의 $Ca^{++}ion$ 교환능은 이론값의 65%였다.

• 한국환경과학회지
• /
• 제31권10호
• /
• pp.833-844
• /
• 2022

A zeolite material with a Si/Al molar ratio of 1.2 was synthesized by changing the NaOH/CFA ratio of coal fly ash (CFA) via a fusion/hydrothermal reaction in the HD thermal power plant. The change in the crystal structure of the zeolite was confirmed using XRD and SEM, and the ammonia adsorption capacities of the synthesized zeolitic materials and a commercial zeolite (Na-A zeolite) were analyzed via an ammonia temperature-programmed desorption (NH₃-TPD) process. The SEM and XRD results revealed out the zeolitic materials from the coal fly ash maintained a hexagonal Linde-type crystal structure similar to that of Na-A zeolite, but the crystallinity of the synthesized zeolitic material was reduced due to impurities. The NH₃ adsorption capacity, determined from the NH₃-TPD analysis of was 1.122 mmol/g of the synthesized zeolitic material, which was lower than the NH₃ adsorption capacity of the Na-A zeolite.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2003년도 추계정기총회 및 국제심포지엄
• /
• pp.122-128
• /
• 2003

To develop a Mg-Zeolite for simultaneous recovery of the N and the P from sewage water, the natural zeolite was treated with 20% $MgCl_2$ solution by changing the pH the temperature and the treating time of the solution. And the contents of Ca Fe Na K Mg of Mg-Zeolite were analyzed by ICP. The optimum treatment condition for Mg-Zeolite was induced to pH 7.0 $50^{\circ}C$ in 20% $MgCl_2$ solution and for 80min treatment. And the Na and the K ions in natural zeolite are significant factors for Mg exchange in the zeolite.

• Bulletin of the Korean Chemical Society
• /
• 제12권3호
• /
• pp.265-270
• /
• 1991

Theoretical calculations on the stabilization energies of framework atoms in hydrolyses Co(Ⅱ )-exchanged zeolite A were made using some potential energy functions and optimization program. The protons which are produced by hydrolysis of $[Co(H_2O)_n]^{2+}$ ion in large cavity showed a tendency to attack the framework oxygen atom O(1) preferentially, and the oxygen atom O(4) within OH- ion was coordinated at Al atom. The weakness of bonds between T(Si, Al) and oxygen by attack of proton and too large coordination number around small aluminum atom will make the framework of Co(Ⅱ)-exchanged zeolite A more unstable. The stabilization energy of $Co_4Na_4$-A framework (- 361.57 kcal/mol) was less than that of thermally stable zeolite A($Na_{12-}$A: - 419.68 kcal/mol) and greater than that of extremely unstable Ba(Ⅱ)-exchanged zeolite A($Ba_{6-}$A: - 324.01 kcal/mol). All the data of powder X-ray diffraction, infrared and Raman spectroscopy of Co(Ⅱ)-exchanged zeolite A showed the evidence of instability of its framework in agreement with the theoretical calculation. Three different groups of water molecules are found in hydrated Co(Ⅱ )-exchanged zeolite A; W(Ⅰ) group of water molecules having only hydrogen-bonds, W(Ⅱ) group water coordinated to $Na^+$ ion, ans W(Ⅲ) group water coordinated to Co(Ⅱ) ion. The averaged interaction energy of each water group shows the decreasing order of W(Ⅲ)>W(Ⅱ)>W(Ⅰ).

• 멤브레인
• /
• 제24권5호
• /
• pp.375-385
• /
• 2014

본 연구에서는 종결정 코팅층이 NaA 제올라이트 분리막 형성에 미치는 영향에 대하여 고찰하였다. NaA 제올라이트 분리막은 평균입경 100 nm 종결정을 다공성 ${\alpha}$-알루미나 표면에 진공여과 코팅하고 $100^{\circ}C$에서 24시간 수열처리하여 합성되었다. 이때 지지체 표면에 분포된 종결정 양을 조절한 후 형성된 NaA 제올라이트 분리층의 두께와 결정입 크기 등 미세구조에 미치는 영향에 대하여 고찰하였다. 종결정 코팅 양은 지지체를 통과한 종결정 수용액의 여과 양을 조절하여 제어하였다. 종결정을 단일층으로 코팅한 후 합성하였을 경우, 코팅 양이 증가함에 따라 분리층 단면에서의 두께와 균일도는 증가하였으며, 표면에서의 결정입 크기는 감소하면서 균일도는 증가하였다. 반면, 종결정을 다층으로 코팅한 후 합성하였을 경우, 균일한 분리층을 형성하였지만 단일층으로 코팅된 경우에 비하여 불균일하였으며 두꺼운 분리층이 형성되었다. 균일하고 초박형의 결함이 없는 제올라이트 분리층을 형성하기 위해서는 종결정을 균일하고 단일층으로 코팅하여야 함을 알 수 있었다. 본 연구로부터 종결정의 코팅 상태가 이차성장에 의한 NaA 제올라이트 분리층의 미세구조를 결정하는 중요한 인자임을 확인할 수 있었다.