• Applied Biological Chemistry
• /
• v.31 no.1
• /
• pp.65-78
• /
• 1988

This study aims effective use of soymilk residue, by-product of soymilk production, and making noodles by mixing soymilk residue with wheat flour. The results of viscosity property, cooking test of dry noodles, texture test of cooked noodles, and sensory test of cooked noodles were as follows. The color of cooked noodles were slightly shifted to yellowness according to the mixing of soymilk residue. The mixing of soymilk residue resulted in the decrease of texture and the loss of solids due to the decrease of visccelasity. Na-alginate, Na-C.M.C., guar gum, and crude gluten were added to improve the texture of noodles mixed with soymilk residue. As the results, either Na-alginate or guar gum was very effective in increasing the viscosity of composite flour and either guar gum or crude gluten was very effective in improving cooking quality. The texture of noodles supplemented by Na-alginate 1.0%, Na-C.M.C. 2.0%, guar gum 0.5%, or crude gluten 2.0% was similar to that of wheat flour noodles. Complex additives mixed with two different additives were very effective in improving noodle-making characteristics. Especially, the properties of the soymilk residue mixed noodles supplemented by crude gluten 1.0% and Na-C.M.C. 1.0% or crude gluten 1.0% and gum 0.5% were nearly the same in the texture organoleptic properties compared with those of wheat flour noodles.

• Journal of the Korean Chemical Society
• /
• v.44 no.2
• /
• pp.109-114
• /
• 2000

In this study, the optimum analytical condition of Differential pulse Voltammetry for the polymeric Sodium Alginate was studied and its reduction funtional groups were confirmed using Cyclic Vol-tammetry and IR spectroscopy. Optimum conditions were as followed; mercury drop size : medium size, accumulation time : 60sec, accumulation potential : -0.20V vs Ag/AgCl, scan rate : 100mV/sec, supporting electrolyte : 0.10M $NaClO_4$(pH 6.8). After polymeric Sodium Alginate was hydrolized at $100^{\circ}C$ in acidic condition, the current peaks of oligomer were compared with current peak of polymeric Sodium Alginate. In this optimum condition, calibration curve of polymer Sodium Alginate showed good linearity from 0.50ppm to 4.0ppm where as oligomeric Sodium Alginate showed good linearity from 0.05ppm to 0.24ppm.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1035-1039
• /
• 1998

Phase separation is the typical phenomenon in protein-polysaccharide mixtures because of thermodynamic incompatibility between two macromolecules. Phase separations of casein-alginate-water systems were investigated by using phase diagram under varying pH (6, 8 and 10) and NaCl concentrations (0, 0.25 and 0.5 M). Incompatibility decreased with increasing pH and decreasing NaCl concentration. Molecular weight of alginates did not significantly affect the phase diagram of casein-alginate-water systems. The results strongly suggested that compatibility of casein and alginate involved electrostatic interactions.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.55-61
• /
• 2016

Organic fouling observed in submerged membrane filtration as a pretreatment for seawater desalination increases energy consumption for membrane operation because of requiring frequent chemical cleaning and membrane replacement. In membrane pretreatment for seawater facing with algae blooms, membrane fouling was observed in submerged microfiltration using sodium alginate model compound which is one of the main components of extracellular polymeric substances. Without aeration, aglinate fouling increased with its concentration while aeration reduced the alginate fouling effectively regardless of its concentration tested. In the absence of aeration, alingate fouling tended to be decreased with increasing calcium concentration. However, this effectiveness was reduced by increasing sodium chloride concentration. At high concentration of sodium chloride and calcium similar to the seawater conditions, aeration reduced initial fouling. However, as time progressed, the effect of increased airflow rate on fouling reduction was not significant, implying that optimum airflow rate to control alginate fouling in submerged microfiltration can exist.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.582-586
• /
• 1999

The processing conditions for producing and edible alginate film from sea tangle were investigated by measuring water vapor permeability (WVP), tensile properties and colors of film. The alginates were extracted with $3\%$ sodium carbonate ($Na_2CO_3$) solution for 5 hrs, and the alginate films were prepared with extracted sodium alginates, D-gluconic acid lactone, $CaCO_3$ and various plasticizers, As the concentration of alginate in making the film was increased, the WVP and elongation of the film were decreased and the tensile strength was increased. The higher amount of plasticizer showed the higher WVP and elongation, and the order of various plasticizers in increasing the WVP and elongation of the film was glycerol, polyethylene glycol, and sorbitol. The addition of sorbitol in the film showed the highest value (89.57) in lightness of Hunter color system and the film added polyethylene glycol had the highest values (-1,12 and 11.4) in redness and yellowness.

• Korean Journal of Agricultural Science
• /
• v.14 no.1
• /
• pp.156-163
• /
• 1987

In these experiment, the conditions of entrapping immobilization of Zygosaccharomyces rouxii that participate in the soysauce brewing are investigated. And carried out the fermentation and aging test by immobilized Zygosaccharomyces rouxii with the hydrolyzed solution prepared from soysauce koji. The results obtained were as follows: 1. Immobilizing conditions of Zygosaccharomyces rouxii. 1) When the concentration of Na-alginate solution is 2.0-2.5%, the bead formation was very good. And the concentration of Na-alginate solution not influenced on the fermentation activity of immobilized Zygosaccharomyces rouxii. 2) Effect of ratio of the precultured Zygosaccharomyces rouxii solution and Na-alginate solution on the fermentation activity of immobilized Zygosaccharomyces rouxii was not highly recognized. But if the ratio of precultured Zygosaccharomyces rouxii solution increased, the fermentation activity of immobilized Zygosaccharomyces rouxii was slightly high. 3) The fermentation activity of immobilized Zygosaccharomyces rouxii that grew over 36hrs was higher than that grew below 24hrs. 4) Increasing the ratio of immobilized Zygosaccharomyces rouxii gel to the fermentative medium, the fermentation activity of Zygosaccharomyces rouxii was higher. 2. The fermentation test by immobilized Zygosaccharomyces rouxii with the hydrolyzed solution of soysauce koji. 1) When fermented for about 96 hrs, the alcoholic fermentation almost stopped and alcohol concentration into the hydrolyzed solution of soysauce koji was 2.6%(v/v) approximately.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1582-1588
• /
• 2010

A new alginate lyase gene of marine bacterium Streptomyces sp. M3 had been previously cloned in pColdI vector and transformed into E. coli BL21 (DE3). In this study, M3 lyase protein without signal peptide was overexpressed by induction with IPTG and purified with Ni-Sepharose affinity chromatography. The absorbance at 235 nm of the reaction mixture and TLC analysis showed that M3 alginate lyase was a polyG-specific lyase. When M3 lyase was assayed with substrate for 10 min, optimum pH and optimum temperature were pH 9 and $60^{\circ}C$. For the effect of 1mM metal ion on M3 lyase activity, $Ca^{++}$ and $Mn^{++}$ ions increased the alginate degrading activity by two-fold, whereas $Hg^{++}$ and $Zn^{++}$ ions inhibited the lyase activity completely. $Mg^{++}$, $Co^{++}$, $Na^+$, $K^+$, and $Ba^{++}$ did not show any strong effects on alginate lyase activity.

• Korean Journal of Food Science and Technology
• /
• v.30 no.6
• /
• pp.1394-1398
• /
• 1998

Lactobacillus bulgaricus LBS 47 and Saccharomyces serevisiae SCS 5 were selected for pure culture inoculation in the fermentation. The effects of stabilizers on the sedimentation, sensory evaluation and viscosity were investigated during fermentation of traditional Andong sikhe. Among the stabilizers added to the traditional Andong sikhe the Na-alginate appeared to be the best. When the product was evaluated by the sensory panel, the addition of stabilizers up to 0.1 % level actually increased the acceptability of the product, while the concentration of more than 0.2% stabilizers affected the acceptability negatively. The viscosity of the product fermented with the CMC and Na-alginate addition reached the maximum on the 2nd day of fermentation, while that of the homogenized Andong sikhe fermented with carrageenan reached the peak on the first day of fermentation.

• Applied Biological Chemistry
• /
• v.49 no.3
• /
• pp.170-174
• /
• 2006

For the purpose of developing a high quality agricultural microbial inoculant, methods and materials for improving encapsulation were investigated. Preparation of capsule was conducted by improving extrusion system with micro-nozzle and peristaltic pump. The sodium alginate was selected because of its cheapness, stability of cells, and gel formation ability. The yields, physical properties and gel formation abilities of extractable alginate from sea tangle were investigated by hot water extractable and alkali soluble methods. The extraction yields of hot water extractable alginate (HWEA) and alkali soluble alginate (ASA) from sea tangle were 8 and 20%, respectively. The HWEA was almost not viscous even in 1.5% of the sample solution, whereas the ASA was very highly viscous in above 3% sample solution. The gel formation ability of each samples varied from 1.5% to 5% and the ASA showed a good gel formation ability at 3% solution as commercial alginate (CA). The soil microbial inoculant, Bacillus thuringiensis, Bacillus subtilis, Lactobacillus plantarum and Geotrichum candidum encapsulated sodium alginate with starch and zeolite for stabilizer. The survivability of encapsulated soil microbial inoculant using alginate without stabilizer appeared to be 66, 52, 70 and 50%, respectively. Inclusion of starch and zeolite with alginate bead increased viabilities in Bacillus sp. and Geotrichum candidum by 81-83% and 89%, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.2
• /
• pp.143-147
• /
• 2000

The effects of alginate extracting conditions from sea tangle and the effects of film preparation conditions on the physical properties of the alginate film were investigated by measuring ester compounds permeability. The higher concentration of sodium carbonate solution as extracting solvent made the higher ethyl acetate permeability of alginate film, but extracting time showed little efficacy of alginate film permeability. The higher concentration of sorbitol as a plasticizer showed higher ethyl acetate permeability of alginate film, Adding various plasticizers, the ethyl acetate permeability of algiante films was increased in order as follow : sorbitol, glycerol and polyethylene glycol. Ester compounds haying the lower molecular weight showed the higher permeability. And the higher temperature made the ethyl acetate permeability of algiante film to be high.