• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.1009-1016
• /
• 2005

This study was carried out to investigate the effects of substituting NaCl by sodium citrate, potassium lactate and calcium ascorbate (40%) on the quality characteristics of emulsion-type sausages. The pH of emulsion-type sausage of the substitution NaCl with sodium citrate were higher than those of control and the other(P<0.05). The CIE L* value emulsion-type sausage of the substitution NaCl with sodium citrate were higher than those of control and the other(P<0.05). The CIE a* value emulsion-type sausage of the substitution NaCl with potassium lactate were higher than those of control and the other, but CIE b* value were lower(P<0.05). The hardness and gumminess of emulsion-type sausage of the substitution NaCl with sodium citrate were higher than those of control and the other. The Na content of emulsion-type sausage of substitution NaCl with calcium ascorbate were lower than those of control and the other, but Ca content were higher(P<0.05). The K and Fe content of emulsion-type sausage of the substitution NaCl with potassium lactate were higher than those of control and the other(P<0.05). The saltiness of emulsion-type sausage of the substitution NaCl with sodium citrate were higher than those of control and the other(P<0.05). The flavor of emulsion-type sausage of the substitution NaCl with calcium ascorbate were higher than those of control(P<0.05).

• Economic and Environmental Geology
• /
• v.46 no.1
• /
• pp.11-19
• /
• 2013

The Daehwa Mo-W deposit is located within the Gyeonggi massif. Quartz and calcite vein mineralization occurred in the Precambrian gneiss and Jurassic granites. Three main types (Type I: liquid-rich $H_2O$ type, Type II: vapor-rich $H_2O$ type, Type III: $CO_2-H_2O$ type) of fluid inclusions were observed and are classified herein based on their phase relations at room temperature. Within ore shoots, type III fluid inclusions have been classified into four subtypes (type IIIa, IIIb, IIIc and IIId) based on their volume percent of aqueous and carbonaceous ($CO_2$) phase at room temperatures combined with their total homogenization behavior and homogenization behavior of $CO_2$ phase. Homogenization temperatures of primary type I fluid inclusions in the quartz range from $374^{\circ}C$ to $161^{\circ}C$ with salinities between 13.6 and 0.5 equiv. wt.% NaCl. Homogenization temperatures of primary type III fluid inclusions in quartz of main generation, are in the range of $303^{\circ}C$ to $251^{\circ}C$. Clathrate melting temperatures of the type III fluid inclusions were 7.3 to $9.5^{\circ}C$, corresponding to salinities of 5.2 to 1.0 equiv. wt. % NaCl. Melting and homogenization temperatures of $CO_2$ phase of type III fluid inclusions were -57.4 to $-56.6^{\circ}C$ and 29.0 to $30.8^{\circ}C$, respectively. Fluid inclusion data indicate a complex geochemical evolution of hydrothermal fluids. The Daehwa early hydrothermal system is characterized by $H_2O-CO_2$-NaCl fluid at about $400^{\circ}C$. The main mineralization occurred by $CO_2$ immiscibility at temperatures of about 300 to $250^{\circ}C$. At the late base-metal mineralization aqueous fluid formed by mixing with cooler and less saline meteoric groundwater.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.3
• /
• pp.432-438
• /
• 2017

Objective: The objective of this study was to evaluate the effect of combinations of $NaNO_2$ and NaCl concentrations on Listeria monocytogenes (L. monocytogenes) growth in emulsion-type sausage. Methods: Emulsion-type sausages formulated with different combinations of $NaNO_2$ (0 and 10 ppm) and NaCl (1.00%, 1.25%, and 1.50%) were inoculated with a five-strain L. monocytogenes mixture, and stored at $4^{\circ}C$, $10^{\circ}C$, and $15^{\circ}C$, under aerobic or vacuum conditions. L. monocytogenes cell counts were measured at appropriate intervals, and kinetic parameters such as growth rate and lag phase duration (LPD) were calculated using the modified Gompertz model. Results: Growth rates increased (0.004 to 0.079 Log colony-forming unit [CFU]/g/h) as storage temperature increased, but LPD decreased (445.11 to 8.35 h) as storage temperature and NaCl concentration increased. The effect of combinations of NaCl and low-$NaNO_2$ on L. monocytogenes growth was not observed at $4^{\circ}C$ and $10^{\circ}C$, but it was observed at $15^{\circ}C$, regardless of atmospheric conditions. Conclusion: These results indicate that low concentrations of $NaNO_2$ and NaCl in emulsion-type sausage may not be sufficient to prevent L. monocytogenes growth, regardless of whether they are vacuum-packaged and stored at low temperatures. Therefore, additional techniques are necessary for L. monocytogenes control in the product.

• Journal of Plant Biology
• /
• v.34 no.3
• /
• pp.185-190
• /
• 1991

Hypocotyl-derived callus cultures of Brassica pekinensis cv. Chungseng were grown on Murashige-Skoog medium containing NaCl, Na2SO4 and mannitol to clarify the effect of salts on callus growth, proline accumulation and water relations. Na2SO4 was more inhibitory than NaCl when survival rate, growth and fresh:dry weight ratios of established callus were measured. Fresh weight in 0.25% NaCl treatment was more than twice as increasable in comparison to the same concentration of Na2SO4 or control. Proline concentration was increased on either salt, attained at highest levels at the 5th subculture, and fluctuated as affected by both salts or mannitol. Concentrations of redeucing sugars were sharply increased after 2 or 3 times of subculture and decreased by increasing subculture. The water and osmotic potential in callus reached a maximum negative value after two weeks in culture, regardless of salt type and mannitol and tugor remained relatively constant on both salt and mannitol treatments.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.17-22
• /
• 1999

Hexagonal M-type barium ferrite $BaFe_{12}O_{19}$ was prepared by a direct solid state reaction between $BaCO_3$ and ${\Alpha}-Fe_2O_3$ powders at temperatures ranging from 800 to 1000 $^{\circ}C$ in a nitrogen or air environment. The effects of NaCl on phase transformation of mixture of $BaCO_3$ and ${\Alpha}-Fe_2O_3$ to $BaFe_{12}O_{19}$ were studied using X-ray diffraction and M$\"{o}$ssbauer spectroscopy. Regardless of the environment for heat treatment or the added NaCl, two phases, BaFe and ${\Alpha}-Fe_2O_3$, coexist for samples heat treated at 800 $^{\circ}C$, but a single phase was observed from samples heat treated at 100$0^{\circ}C$ in both air and nitrogen environments. It was found that the addition of NaCl reduced the amount of $a-Fe_2O_3$ phase.hase.

• Membrane Journal
• /
• v.5 no.2
• /
• pp.81-88
• /
• 1995

Separation performance was measured for the disc plate and frame type reverse osmosis module using NaCl and sucrose solutions. An analysis of membrane performance was done following the equations proposed by Kimura-Sourirajan[8]. The membrane permeability was $2.17 \times 10^{-6}$(gmol/$cm^2$-sec-bar) and independent of operating pressure. The effect of concentration polarization for sucrose solution was higher than that of NaCl. Permeation flux for sucrose solution above 40 bar was decreased as operating pressure was increased. Solute rejection for NaCl solution was decreased, but that of sucrose was increased as operating pressure was increased.

• Journal of Environmental Science International
• /
• v.13 no.2
• /
• pp.175-180
• /
• 2004

A prompt gamma-ray neutron activation (PGNA) system was simulated by the Monte Carlo N-Particle transport code (MCNP-4A) to estimate the level at which the scattered photon fluence rate, the absolute efficiency of the HPGe-detector, the volume of the concrete sample and the $^{35}$ /Cl(n, ${\gamma}$) reaction rate in this sample contribute to the count rate in the NaCl concentration measurement. The n- ${\gamma}$ fluence rates at the ST-2 beam tube exit of the HANARO reactor were used as input data, and the GAMMA-X type HPGe detector was modeled to tally 1.1649 MeV ${\gamma}$ -rays emitted from the $^{35}$ Cl(n, ${\gamma}$) reaction in the concrete sample. For three cylindrical concrete samples of 13.8, 46.8 and 157.1 ㎤ volumes, respectively, the relations between the NaCl weight fractions of 0.1, 1, 2 and 5 % in each of the concrete samples and the 1.1 649 MeV pulses created in the HPGe detector model were studied. As a result, it was found that the count rate at the same NaCl concentration nearly depends on the volume of the samples in a simulated condition of the same NaCl concentration samples, and that the linearities of the NaCl concentration calibration curves were reasonable in the narrow range of the NaCl weight fraction.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1999.05a
• /
• pp.34-35
• /
• 1999

• Journal of Korean Society on Water Environment
• /
• v.24 no.6
• /
• pp.670-675
• /
• 2008

Batch type adsorption and desorption tests were performed with different types (Powder, Granule) of Layered double hydroxides (LDHs) saturated with phosphate. The adsorption isotherm was approximated as a modified Langmuir type equation. The maximum adsorption capacity was 55 mg-P/g-LDH for powder type LDH, and 46 mg-P/g-LDH for granule type LDH. The highest phosphate desorption (79.6%) was obtained with 20% NaOH solution, whereas the desorption degrees were 4.8, 22.2% and 46.7% in the solutions of acidic condition (pH 4), 30% NaCl, and 3% NaOH, respectively. It was suggested that the optimal condition for the phosphate desorption from LDH was 30% NaCl + 3~6% NaOH solutions. The desorption characteristics of LDH was little influenced by adsorbent type.

• Corrosion Science and Technology
• /
• v.8 no.5
• /
• pp.193-196
• /
• 2009

For the estimation of uncertainty in potentiodynamic polarization resistance measurement, the type A uncertainty was measured using type 316 stainless steel in an acidified NaCl solution. Sensitivity coefficients were determined for measurand such as scan rate of potential, temperature of solution, concentration of NaCl, concentration of HCl, surface roughness of specimen and flow rate of purging gas. Sensitivity coefficients were large for the measurand such as the scan rate of potential, temperature of solution and roughness of specimen. However, the sensitivity coefficients were not the major factors influencing the combined standard uncertainty of polarization resistance due to the low values of uncertainty in measurements of the measurands. A major influencing factor was the concentration of NaCl. The value of type A uncertainty was 1.1 times the value of type B uncertainty, and the combined standard uncertainty was 10.5 % of the average value of polarization resistance.