• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.103-104
• /
• 2003

어류의 양식생산 과정중에는 사육중인 어류에게 스트레스로 작용할 수 있는 여러 가지 요인들이 있다. 그 중에서도 생산된 종묘의 양식장 운송, 수확한 어류의 소비지 운반 등은 양식과정중 피할 수 없는 작업이다. 어류의 수송 후에는 혈장 corticosteroid, glucose, 전해질, 삼투질 농도, 적혈구수, hematocrit, hemoglobin 등이 변화하는 것으로 알려지고 있다(Chang et al. 2001; Hur et al., 2002, 2003). 스트레스 요인별 연구로는 염분, 수온, 밀도 및 마취제에 관한 것 등이며, 아울러 이들의 복합적인 요인에 대하여 스트레스 반응을 최소화시키려는 연구가 진행되고 있다. 어류종묘의 수송이나 수확된 어류가 대량으로 수송되고 있으므로, 넙치(Paralichthys olivaceus)와 같은 대량수송 어류의 수송에 따른 스트레스 반응에 대한 연구의 필요성이 제기된다. 그러므로 본 연구에서는 넙치를 사용하여 염분, 수온 및 마취제에 의한 수송이 스트레스 지표로 알려져 있는 혈액학적 요인, cortisol, glucose, lactic acid 및 삼투질 농도 둥에 나타나는 생리학적 반응을 조사하여, 활어수송 과정에서 나타나는 스트레스 반응에 대한 기초자료를 제공하고자 하였다. 실험어는 21.2 cm, 97.4 g인 양식 넙치를 사용하여, 수온은 20℃ (natural water temperature, NWT)와 15℃ (cooling water temperature, CWT), 염분은 해수(35‰)와 15‰해수, 마취제(anesthesia, Anes., MS-222)는 50 ppm의 조건으로 혼합한 실험구를 설정하였다. 실험구는 각각 NWT＋35‰, CWT＋35‰, NWT＋15‰, NWT＋15‰, NWT＋35‰＋Anes., CWT+35‰＋Anes., NWT＋15‰+Anes. 및 CWT+15‰＋Anes.의 8개 실험구를 2반복으로 설정하여 경북울진∼부산까지 약 400 km (6시간)를 차량수송하였다. 수송용기는 스티로폼상자(66×42×20 cnn)로서, 여기에 해수 3 L와 액화산소를 넣은 비닐봉지에 넙치 8마리씩 수용하여 수송하였다. 혈액의 성상 및 분석항목은 수송전ㆍ후에 채혈하여 비교하였다. 수송전 hematocrit는 22.2±3.8%에서 수송후 NWT＋35‰에서 15.3＋3.9%, CWT＋35‰은 16.7±3.0%, NWT+15‰구에서는 19.2±1.8%로 낮아졌으며, CWT+15‰구는 20.9±3.6%로 수송전과 차이가 없었다. 한편 NWT＋15‰＋Anes.구는 17.8±0.9%, CWT＋15‰＋Anes.구는 14.5±1.5%로 낮아졌다. Cortisol은 수송전 2.4±0.1 ng/ml로부터 CWT＋35‰구는 16.7±12.8 ng/ml, NWT＋35‰구는 47.9＋19.8 ng/ml, NWT＋15‰구는 43.5±13.9 ng/ml, CWT＋15‰구는 26.1±8.3 ng/ml, NWT＋15‰+Anes.구는 61.7±3.3 ng/ml, CWT+15‰+Anes.구는 86.1±19.0 ng/ml로 높아졌다. Glucose는 수송전 74.2±32.6 mg/dl로부터 NWT＋35‰구는 197.9±27.5 mg/dl, CWT＋35‰구도 272.1±29.9 mg/dl로 유의하게 높아졌다. Na/sup +/의 수송전 농도는 163.5±0.6 mEq/L로부터 NWT＋35‰구와 CWT＋35‰구는 각각 175.3±1.2 mEq/L, 190.0±5.0 mEq/L로 높아졌으며, 다른 실험구에서는 차이가 없었다. 본 연구 결과, cortisol과 glucose에서 수송전보다는 모든 실험구에서 높게 나타나 수온, 염분 및 마취제를 사용하여도 스트레스를 받고 있는 것으로 나타났다. 특히, cortisol의 경우, 수온과 염분만을 혼합한 실험구보다 마취제를 혼합한 실험구에서 높게 나타났다. 다른 혈액학적 항목에서는 염분과 마취제를 사용하지 않았던 실험구인 NWT＋35‰구와 CWT＋35‰구에서 다른 실험구에 비하여 glucose, Na/sup +/ 및 Cl/sup -/ 등에서는 높게 나타나는 경향을 보였다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.195-198
• /
• 2001

To improve the properties of FRP composite materials, the hybrid prepreg with non-woven tissue (NWT) is developed. The hybrid prepreg consists of undirectional prepreg and NWT prepreg. The NWT prepreg is made by compounding the NWT and polymer resin, which is similar to the production method of FRP prepreg. The NWT has short fibers which are discretely distributed with in-plane random orientation. The stiffness and strength of NWT composites are lower than those of continuously fibrous composites. The strengthening technique and fabricating technique for the hybrid prepreg are described in this work. The mechanical characteristics of hybrid composites with NWT are discussed and compared with those of the FRP composites.

• Composites Research
• /
• v.19 no.2
• /
• pp.20-27
• /
• 2006

The hybrid composite materials with non-woven tissue (NWT) was developed to improve the mechanical properties of conventional FRP composite materials. The hybrid prepreg with NWT consists of FRP prepreg and NWT prepreg. The NWT prepreg consists of NWT and polymer resin. The NWT has short fibers, discretely distributed with in-plane random orientation fibers. The purposes of this study of hybrid prepreg with NWT are (i) to increase the interlaminar properties(the fracture toughness and strength), (ii) to improve the mechanical properties and reliability, while maintaining a low cost, (iii) to introduce a tough and strong interlayer at critical positions to be required of strength in the laminate. To accomplish the above purposes, a production technique to decrease voids in NWT layers was proposed in this paper. The interlaminar failure characteristics of laminated composite materials was tremendously improved by hybrid concept with NWT.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.5
• /
• pp.1-8
• /
• 2007

A long wave induced by a Gaussian-shape submarine landslide is simulated by a 2D fully nonlinear numerical wave tank (NWT). The NWT is based on the boundary element method and the mixed Eulerian/Lagrangian approach. Using the NWT, physical characteristics of land-slide tsunami, including wave generation, propagation, particle kinematics, hydrodynamic pressure, run-up and depression, are simulated for the early stage of long wave generation and propagation. Various sliding mass heights are applied to the developed model for a systematic sensitivity analysis. In particular, the fully nonlinear NWT results are compared with linear results (exact body-boundary conditions with linear free-surface conditions) to identify the nonlinear effects in the respective cases.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.217-220
• /
• 2004

According as utilization for web increases rapidly, it is demanded that model about support interaction between web-based applications systematically and solutions can integrate new distributed platforms and existing environment effectively, accordingly, Web Services appeared by solution in reply. These days, a lot of software and hardware companies try to adoption of Web Services to their market, attenpt to construct their applications associationing components from various Web Services providers. However, to execute Web Services completely. it must have interoperability and need the standardization work that avoid thing which is subject to platform, application as well as service and programming language from other companies. WS-I (Web Services Interoperability organization) have established Basic Profile 1.0 based on XML, UDDI, WSDL and SOAP for web services interoperability and developed usage scenario Profile to apply Web Services in practice. In this paper, to verify suitability Web Services interoperability between heterogeneous two applications, have design and implements the Book Information Web Services that based on the Web Services Client of J2SE platform and the Web Services Server of .NET platform, so that analysis and verify the service by adaptation of WS-I Basic Profile.

• Journal of Marine Life Science
• /
• v.7 no.2
• /
• pp.205-212
• /
• 2022

Transport is essential in the farming process of farmed fish and is one of the physical stress factors such as sorting. The effect of water temperature and anesthesia during low salinity transport was confirmed. In the experimental group, the water temperature was set to 20℃ (natural water temperature, NWT), 15℃ (cooling water temperature, CWT) respectively, in water with a salinity concentration of 35‰, 15‰ and an anesthetic (anesthesia, Anes., Sigma USA) was diluted and mixed to 50 ppm. A styrofoam box (66×42×20 cm) was used as a transport container, and 8 flounder were accommodated and transported in a plastic bag injected with 3 ℓ of seawater and liquid oxygen. As a result of the study, the concentration of cortisol before transport increased significantly from 2.4±0.1 ng ml^-1 in the experimental groups except for the CWT+35‰ group (16.7±12.8 ng ml-1). The K⁺ concentration slightly increased from 3.1±0.0 mEq l^-1 before transport to 4.5±1.1 mEq l^-1 in the NWT+15‰ group, showing no difference, and significantly increased in all other experimental groups. There was no effect on changes in blood characteristics, and water temperature and anesthetic had a negative effect on osmotic control due to stress. AST and ALT were not affected.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.6
• /
• pp.1572-1578
• /
• 2007

The specified wastes consist of waste acid, waste alkali, waste oil, waste organic solvent, waste resin, dust, sludge, infectious waste, and others. Among these specified wastes, a great portion is liquid phase wastes. The purpose of this study is to develop the high temperature and high pressure (HTHP) treatment system for decomposition of the liquid phase specified waste (LPSW). For this, we analyzed the physical and chemical properties of the LPSW such as density, proximate analysis, ultimate analysis, heating values, and designed 0.3 ton/day HTHP treatment system. The LPSW tested in this experiment were prepared by adding TCE(trichloroethylene) and toluene to liquid phase waste which was brought into the commercial waste treatment company. The average density of waste oil (25 samples), waste resin (5 samples), and waste solvent (12 samples) was 0.99 g/mL, 0.91 g/mL, and 0.93 g/mL, respectively. And the average lower heating value of waste oil, waste resin, and waste solvent was 8,294 kcal/kg, 5,809 kcal/kg, and 7,462 kcal/kg, respectively. The DRE (Destruction & Removal Efficiency) of TCE and toluene were 99.95% and 99.73% at atmospheric pressure conditions and that were 99.99% and 99.82% at pressurized conditions, respectively. These results showed that TCE/toluene mixtures were properly decomposed over about 99.73% of DRE by the HTHP treatment system and pressurized conditions were more effective to destroy those pollutants than atmospheric pressure conditions. Also these systems could be directly applied to industries which try to treat the liquid phase specified waste within the regulation limit.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.3
• /
• pp.388-397
• /
• 2010

A two-dimensional time-domain, potential-theory-based fully nonlinear numerical wave tank (NWT) was developed by using boundary element method and the mixed Eulerian-Lagrangian (MEL) approach for free-surface node treatment. The NWT was applied to prediction of primary wave energy conversion efficiency of a bottom-mounted oscillating water column (OWC) wave power device. The nonlinear free-surface condition inside the chamber was specially devised to represent the pneumatic pressure due to airflow velocity and viscous energy loss at the chamber entrance due to wave column motion. The newly developed NWT technique was verified through comparison with given experimental results. The maximum energy extraction was estimated with various chamber-air duct volume ratios.

• Ocean Systems Engineering
• /
• v.4 no.2
• /
• pp.83-97
• /
• 2014

Wave propagation in a three-dimensional (3D) fully nonlinear numerical wave tank (NWT) is studied based on velocity potential theory. The governing Laplace equation with fully nonlinear boundary conditions on the moving free surface is solved using the indirect desingularized boundary integral equation method (DBIEM). The fourth-order predictor-corrector Adams-Bashforth-Moulton scheme (ABM4) and mixed Eulerian-Lagrangian (MEL) method are used for the time-stepping integration of the free surface boundary conditions. A smoothing algorithm, B-spline, is applied to eliminate the possible saw-tooth instabilities. The artificial wave speed employed in MTF (multi-transmitting formula) approach is investigated for fully nonlinear wave problem. The numerical results from incorporating the damping zone (DZ), MTF and MTF coupled DZ (MTF+DZ) methods as radiation condition are compared with analytical solution. An effective MTF+DZ method is finally adopted to simulate the 3D linear wave, second-order wave and irregular wave propagation. It is shown that the MTF+DZ method can be used for simulating fully nonlinear wave propagation very efficiently.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.4
• /
• pp.245-252
• /
• 2020

Wave run-up is an important phenomenon that should be considered in ocean structure design. In this study, the wave run-up of a surface-piercing circular cylinder was calculated in the time domain using the three-dimensional linear and fully nonlinear numerical wave tank (NWT) techniques. The NWT was based on the boundary element method and the mixed Eulerian and Lagrangian method. Stokes second-order waves were applied to evaluate the effect of the nonlinear waves on wave run-up, and an artificial damping zone was adopted to reduce the amount of reflected and re-reflected waves from the sidewall of the NWT. Parametric studies were conducted to determine the effect of wavelength, wave steepness, and the draft of the cylinder on the wave run-up of the cylinder. The maximum wave run-up value occurred at 0°, which was in front of the cylinder, and the minimum value occurred near the circumferential angle of 135°. As the diffraction parameter increased, the wave run-up increased up to 1.7 times the wave height. Furthermore, the wave run-up was 4% higher than the linear wave when the wave steepness was 1/35. In particular, the crest height of the wave run-up increased by 8%.