• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.911-914
• /
• 2004

웹 서비스 기반기술의 표준화와 웹 서비스의 필요성이 증가함에 따라 많은 서비스들이 개발되어지고 있다. IBM, Microsoft, SAP, NTT DOCOMO에서 운영하고 있는 UBR(UDDI Business Registry)을 이용하여 웹 서비스 사용자들은 많은 서비스들을 즉시 사용할 수 있다. 하지만, 현재 제공되어지고 있는 웹서비스들 중에서 정상적인 서비스를 제공하고 있는 개수는 등록되어있는 웹 서비스의 개수에 비해 극히 적다. 이러한 상황은 서비스를 사용하려는 사용자에게 가용한 서비스를 찾기 위해 많은 노력과 시간을 요구하게 된다. 이에 본 논문에서는 UBR로부터 검색되어진 웹 서비스들 중에서 가용한 서비스들만을 분리하여 사용자에게 제공하는 시스템을 제안한다. 본 시스템은 UBR 검색 후 이동 에이전트를 사용하여 테스트를 수행, 가용한 서비스 리스트를 사용자에게 제공함으로써 사용자가 검색되어진 웹 서비스를 즉시 사용할 수 있도록 한다.

• 생명과학회지
• /
• 제30권4호
• /
• pp.321-330
• /
• 2020

본 연구의 목표는 CuCl₂가 지브라피시에 미치는 영향을 조사하는 것이다. CuCl₂에 대한 지브라피시의 반수치사농도를 조사하기 위하여 각기 다른 시간에 따른 농도를 설정하여 노출시켰다. 본 연구에서는 스트레스 반응의 증가를 보기 위하여 whole-body cortisol level 측정과 행동약리학적 변화를 측정하기 위해서 open field test와 novel tank test를 실시하였다. Whole-body cortisol의 sample을 수집하거나 행동실험을 실시하기 전에 CuCl₂ 또는 vehicle을 1시간 동안 처리하였다. CuCl₂의 반수치사농도는 24시간, 48시간, 96시간에서 각각 30.3, 25.3, 14.8 ㎍/l으로 측정되었다. CuCl₂에 노출된 지브라피시의 novel tank test의 결과는 총 이동거리, 움직이는 시간 그리고 속도는 유의성이 있게 감소한 반면, turn angle은 최고농도에서 유의성이 있게 증가하였다(p<0.05). 다른 행동실험인 open field test의 결과에서도 총 이동거리, 움직이는 시간 속도가 CuCl₂의 노출에 의해서 감소하였으며, turn angle과 meandering이 유의하게 증가하였다(p<0.05). CuCl₂에 노출된 지브라피시의 whole-body cortisol은 1.5 or 15 ㎍/l의 농도에서는 유의하게 증가하였으나, 150 ㎍/l의 농도에서는 유의성 있는 변화를 발견하지 못하였다(p<0.05). 본 연구의 결과는 CuCl₂의 노출이 지브라피시에서 치사율 증가, 행동 및 내분비의 변화 등을 포함하는 독성 반응을 야기하는 것을 나타낸다.

• 한국항해항만학회지
• /
• 제47권1호
• /
• pp.18-24
• /
• 2023

동일본 대지진 이후부터 성인 피해자들의 증언을 정리한 보도와 서적 등이 간행되어 당시의 피난 상황을 알려지게 되었다. 그러나 이러한 자료 중 학생들의 피난 상황 정보는 매우 적으며 지진이나 해일에 의해 이들이 어떤 행동을 취하고 피난을 했는지에 대해서는 충분히 밝혀지지 않았다. 본 연구에서는 동일본 대지진에서 학생들의 피난 행동을 분석 및 고찰하여 향후 예상되는 재난에 대한 학생들의 피난행동에 관한 지식을 얻는 것을 목적으로 한다. 연구결과 학생들은 지진해일에 대한 정보를 수동적으로 얻고 있으며, 피난행동은 성인에 크게 의존하고 있었다. 지진 발생 직후 행동은 흔들림이 멈출 때까지 자신의 몸을 보호하며 가만히 있는 경우가 많았고 흔들림이 잦아든 후 다른 장소로 이동하는 취하는 경향을 알 수 있었다. 지진해일의 위협으로부터 벗어나기 위해 리아스식 해안지역 학생들은 주로 높은 곳으로 이동하였고, 평야지역 학생들은 학교 등 높은 건물로 이동하여 수직 이동하는 것을 알 수 있었다. 피난 장소로의 이동 형태는 한번의 이동으로 최종 피난장소에 도착하였으며 이는 사전에 피난 장소를 결정하고 움직였다고 판단된다.

• Industrial Engineering and Management Systems
• /
• 제12권4호
• /
• pp.351-358
• /
• 2013

This paper proposes a multiobjective model describing the trade-offs involved in selecting the locations of drop-off boxes for collecting used products and transporting these products to designated locations. We assume the following reverse flow of used products. Owners of used products (cellular phones, digital cameras, ink cartridges, etc.) take them to the nearest drop-off box when the distance is reasonably short. We also assume that owners living closer to drop-off boxes dispose of more used products than do owners living farther from drop-off boxes. Different types of used products are collected, with each type requiring its own drop-off box. A transportation destination for each product is specified. Three objectives are considered: maximizing the volume of used products collected at drop-off boxes; minimizing the cost of transporting collected products to designated locations; and minimizing the cost of allocating space for drop-off boxes. We formulate the above model as a multiobjective integer programming problem and generate the corresponding set of Pareto optimal solutions. We apply the model to an area using population data for Chofu City, Tokyo, Japan, and analyze the trade-offs between the objectives.

• Journal of information and communication convergence engineering
• /
• 제12권4호
• /
• pp.228-236
• /
• 2014

One of major purposes of these standard technologies is to ensure interoperability between entities from different vendors and enable interworking between various technologies. As interoperability and interworking are essential for machine-to-machine communications (M2M) and Internet of Things (IoT) for them to achieve their ultimate goal, i.e., things to be connected each other, multiple standards organizations are now working on development M2M/IoT related specifications. This paper reviews the current activities of some of the most relevant standardization bodies in the area of M2M and IoT: third-generation partnership project (3GPP) core and radio network aspects, broadband forum, and oneM2M. The major features and issues being focused upon in these standards bodies are summarized. Finally, some key common trends among the different bodies are identified: a common service layer platform, new technologies mitigating an explosive growth of network traffic, and considerations and efforts related to the development of device management technologies.

• Journal of Multimedia Information System
• /
• 제7권2호
• /
• pp.147-156
• /
• 2020

The author Nakajima was involved in the field of disaster communications and emergency medical care as guest research scientist at the Fukushima Nuclear Accident Independent Investigation Commission established by the National Diet of Japan and reviewer of the Commission's report, and Kurokawa was the chairman of this Commission. Looking back over a decade, we are on the liability issue of bureaucrats and telecom operators, so it's becoming clear what was hidden at the time. The battery of NTT DoCoMo's mobile phone repeaters had a capacity of only about 24 hours, and communication failures increased after one day. The Government also failed to issue an announcement of "Vent from reactor" under the Telecommunications Act Article No. 129. This mistake lost the opportunity to use the third-party telecommunications (e.g. taxi radios). Furthermore, as a result of LASCOM (telecommunications satellite network for local governments via GEO) and a variety of unexpected communication failures, the evacuation order "Escape!" could not be notified to the general public well. As a result, the general public was exposed to unnecessary radiation exposure. Such bureaucratic slow action in emergencies is common in the response to the 2020 coronavirus.

• Asian Journal of Business Environment
• /
• 제9권4호
• /
• pp.5-13
• /
• 2019

Purpose - This research is aimed to investigate the impact of the Information and Communication Technology (hereinafter ICT) development index and ICT investment on Indonesian economic growth. Research design, data and methodology - The data used consist of ICT development index, government expenditure on ICT sector, and economic growth from 33 provinces in Indonesia from 2012 to 2015. Based on the Networked Readiness Index published by the World Economic Forum (WEF), Indonesia was ranked 80^th among 142 countries in 2012 and had climbed 64^th in 2014. This indicates that the businesses in Indonesia have adopted ICTs to increase productivity and expand their activities. Panel data regression analysis is performed to reveal the change of the impact over time in each of the provinces. Result - The ICT development index and government expenditure for ICT have a positive effect on the economic growth of all provinces, although the impact is different in each of the provinces. There is a digital gap between the provinces, especially the large digital gap occurring with DKI Jakarta. The provinces of Eastern Indonesia such as NTT and Papua are still relatively slow in development of ICT. Conclusions - ICT development index and allocation of local government expenditure for ICT have significant effect on economic growth. ICT development index has a bigger role in increasing economic growth.

• 기술혁신연구
• /
• 제13권2호
• /
• pp.45-70
• /
• 2005

Much work on innovation has focused on the manufacturing sector. In this paper, we propose a framework for analyzing innovation in services centred on capability and technology integration. We illustrate the theoretical points made by conducting a case study on an international telephone communications provider Brastel, which introduced significant innovations in international calling services, in the form of rechargeable pre-paid calling card, through effective application of standard IT. Brastel is situated against its main competitors, considering two dimensions of price and service breadth and convenience. A novel technique for measuring competitiveness based on price and service index is introduced. The following competitors were selected: NTT, KDDI, Japan Telecom, Fusion Communications, J-Call / World Link, G-Call, ASP Check, Primus, QuickPhone, and MCI. To create the service index, factors such as ease of use, convenience, number of languages in which the services are available, and additional features were taken into account. The company itself and the rechargeable card innovation were analyzed through in-depth interviews and data collection. It was shown that a competitive advantage was maintained through internal and external capabilities.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.341-344
• /
• 1999

We reported compositional separation(CS) into Co-enriched and Cri-enriched components inside the grains of Co-Cr based thin films prepared by rf sputtering. CS strongly depends on the sputtering conditions of substrate temperature and target composition. Tuning the microstructure of the Co-Cr films is important in order to employ the CS for high-density magnetic recording. We investigated the origin of CS from thermodynamic viewpoint. We employ a spinodal decomposition-like model to describe the origin of the CS in Co-Cr films. We consider the total free energy of the Co-Cr films as the sum of several free energies of; 1) thermodynamic mixing entropy of a binary solid solution, 2) magnetic ordering interaction(MOI) energy below the Curie temperature, and 3) excess interaction energy(XS) caused by the sputtering process as a function of temperature and composition. Those energies distorted the total free energy like the spinodal decomposition and caused the compositionally separated fine microstructure inside the grains. If the second derivative of the total free energy with respect to Cr composition becomes negative at a given substrate temperature, we may observe a metastable compositional separation inside the Co-Cr alloy films. We expect to exploit the microstructure of CS for ultra-high density magnetic recording.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.304-307
• /
• 2002

High speed machining was accomplished. through the technological advances which covers the whole field of mechanical industry. But tapping have many troubles because of its complicate cutting mechanism, for example. tool damage, chip elimination and synchronization between spindle rotation and feed motion. But High speed tapping is so important that it marches in step with the flow of the times and make improvement in the productivity. In this paper we analyze mechanism of high speed synchronized tapping with the signal of tapping torque and spindle speed obtained through the newly developed high speed tapping machine(NTT-30B). We made an experiment with this machine on condition of various speed from 1000rpm to 10000rpm. As one complete thread is performed through the whole chamfer cutting, cutting torque increases highly in chamfer cutting, but smoothly in full thread cutting functioning of the threads guide. And the size of cutting torque according to spindle speed(rpm) was not enough of a difference to be conspicuous.