• Journal of Korea Water Resources Association
• /
• v.45 no.1
• /
• pp.39-52
• /
• 2012

Surface-subsurface interactions are an intrinsic component of the hydrologic response within a watershed. In general, these interactions are considered to be one of the most difficult areas of the discipline, particularly for the modeler who intends simulate the dynamic relations between these two major domains of the hydrological cycle. In essence, one major complexity is the spatial and temporal variations in the dynamically interacting system behavior. The proper simulation of these variations requires the need for providing an appropriate coupling mechanism between the surface and subsurface components of the system. In this study, an approach for modelling surface-subsurface flow and transport in a fully intergrated way is presented. The model uses the 2-dimensional diffusion wave equation for sheet surface water flow, and the Boussinesq equation with the Darcy's law and Dupuit-Forchheimer's assumption for variably saturated subsurface water flow. The coupled system of equations governing surface and subsurface flows is discretized using the finite volume method with central differencing in space and the Crank-Nicolson method in time. The interactions between surface and subsurface flows are considered mass balance based on the continuity conditions of pressure head and exchange flux. The major module consists of four sub-module (SUBFA, SFA, IA and NS module) is developed.

• Journal of Navigation and Port Research
• /
• v.47 no.4
• /
• pp.220-230
• /
• 2023

Aids to Navigation (AtoN) is an important tool for safe navigation, and the variety of information provided by AtoN is invaluable. The demand for standardized AtoN information for efficient utilization is gradually increasing, and for this purpose, the International Association of Lighthouse Authorities (IALA) has developed S-201, a standard for the management of AtoN information, and recommends its application to member countries. Notably, since Korea defines AtoNs and manages the information according to the Aids to Navigation Act, the need for definition and information management according to the S-201 standard, an international standard, is even greater. Therefore, in this study, according to the recommendation of IALA, we aimed to suggest a way to manage AtoN information by applying the S-201 standard. To this end, after comparing the classification criteria of the AtoN information of the IALA, and that of Korea's classification standards, Korea's AtoN information management plan applying the S-201 standard was presented. The results of this study provide important basic data for managing standardized digital AtoN information that is easy to use worldwide.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.879-886
• /
• 2014

This study was conducted to test in vitro the antagonistic effect of composted liquid manure (CLM) against soil-borne turfgrass pathogenic fungi, Rhizoctonia solani AG-2-2 (IIIB) (brown patch), R. solani AG-2-2 (IV) (large patch), and Sclerotinia homoeocarpa (dollar spot) for environmentally friendly turfgrass management. CLMs were collected from 9 livestock excretion treatment facilities around the country including Gunwi (GW), Hapcheon (HC), Hoengseong (HS), Icheon (IC), Iksan (IS), Muan (MA), Nonsan (NS), and Yeoju (YJ). CLMs of IC, GW, and IS showed s ignificant (p < 0.05) mycelium growth inhibition that was 17.8%, 20.4%, and 48.0% against R. solani AG-2-2 (IIIB), R. solani AG-2-2 (IV), and S. homoeocarpa, respectively. A t otal of 110 bacterial isolates were obtained from the CLMs that showed antagonistic effects. Among them, 5, 4, and 10 microbe isolates showed promising antifungal activity against mycelium growth of R. solani AG-2-2 (IIIB), R. solani AG-2-2 (IV), and S. homoeocarpa, respectively. The bacterial isolates ICIIIB60, GWIV70, and ISSH20 effectively inhibited the mycelial growth of three soil-borne turfgrass pathogens. Selected bacterial isolates were identified as Alcaligenes sp., Bacillus licheniformis Ab2, and B. subtilis C7-3 through 16s rDNA gene sequence analysis. Among 5 fungicides, the most compatible fungicide with ICIIIB60, GWIV70, and ISSH20 was tebuconazol, toclofos-methyl and toclofos-methyl, respectively. These findings suggested that CLMs could be effectively used not only as organic liquid fertilizer sources but also as biological control agents for soil-borne turfgrass diseases such as brown patch, large patch, and dollar spot.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.4 no.1
• /
• pp.23-36
• /
• 1995

The purpose of this artic1e is to compare soft tissue profiles between Korean adults with normal occ1usion and malocclusin and to identify the differences between them. The subjects of this cephalometric study were 40 males with normal occlusion(Group 1), 27 females with normal occlusion(Group 2), 28 adults with Angle's Class II malocclusion(Group 3) and 41 adults with Angle's Class III malocclusion(Group 4). The results of this study were as follows ; 1) People with Angle's Class II malocclusion had tendency to have more labial tipping of lower teeth than people with normal occ1usion. Through NOA angle measurement, it was determined that people with Angle's Class II malocclusion had more protruding midface than people with normal occlusion and people with Angle's Class III malocclusion had retruding midface. 2) Through Powell's esthetic triangle analysis, it was determined that people with Angle's Class II malocclusion had retruding chin and protruding nose. 3) No significant differences between people with normal occlusion and maloclusion could be identified by measuring soft tissue profile angle basis of S-NS plane. 4) There were significant differences between groups with normal occlusion and malocclusion by measuring Facial convexity angle(Significance level 99%). 5) By measuring the distance between each landmark basis of N-Pog plane, People with Angle's Class II malocclusion were identified as having more protruding midface, but there were no significant differences between people with normal occlusion and Angle's Class III malocclusion. 6) By measuring the vertical dimension of the face, it was determined that the lower facial height was higher than the upper facial height in all groups, particularly in group with Angle's Class III malocclusion. 7) By measuring the lips basis of E-line and S-line, it was determined that people with Angle's Class III malocclusion had more, protruding lower lips than people with normal occlusion, while people with normal occlusion, while people with Angle's Class II malocclusion had more protruding upper lips. By measuring the distance between the superior sulcus and inferior sulcus basis of H-line, people with Angle's Class II malocclusion had thicker upper lips than the other's.

• Journal of Embryo Transfer
• /
• v.33 no.4
• /
• pp.205-210
• /
• 2018

This study was performed to investigate the effect of types of oil (OVOIL vs. OIL) on B6D2F1 mice oogenesis. In this study, B6D2F1 F1 mice were used in order to maximize oogenesis. The expansion rate of cumulus cells ($82.0%{\pm}0.2$ vs. $78.0%{\pm}0.1$), in vitro fertilization rate ($92.0%{\pm}0.1$ vs. $88.0%{\pm}0.1$), developmental rate ($91.0%{\pm}0.1$ vs. $87.0%{\pm}0.2$), blastocysts formation rate ($56.0%{\pm}0.1$ vs. $57.0%{\pm}0.1$), and zona hatched rate($41.4%{\pm}0.2$ vs. $24.0%{\pm}0.1$) were not different between groups (NS; P>0.05). However, there was a significant difference in maturation rate; the OVOIL group showed higher maturation rate compared to that of the OIL group ($96.0%{\pm}0.1$ vs. $87.0%{\pm}0.1$; P<0.05). In the blastocysts cell numbers, the total cell numbers ($83.9{\pm}26.1$ vs. $56.9{\pm}23.9$), ICM cell numbers ($15.7{\pm}8.8$ vs. $6.3{\pm}3.5$), TE cell numbers ($68.3{\pm}25.7$ vs. $50.7{\pm}24.1$), % ICM ($21.6%{\pm}0.1$ vs. $12.7%{\pm}0.1$), and the ratio of ICM:TE ($1:6.2{\pm}6.5$ vs. $1:10.3{\pm}7.0$) were significantly higher in the OVOIL group than the OIL group (P<0.05). These results suggested that it is expected to achieve the more developmental ability of B6D2F1 mice depending on the type of oil (OVOIL vs. OIL). In addition, the results can provide essential information for culture condition on B6D2F1 mice. Henceforth, thus, it is expected that these results herein might be used for in vitro culture of human embryos.

• Women's Health Nursing
• /
• v.4 no.1
• /
• pp.5-35
• /
• 1998

This study attempted to determine the relation between the maternal role strain and their husbands' support in employed and nonemployed first-time mothers, and how it changed over time. A descriptive, longitudinal and comparative study design was conducted to collect and analyzed the data at three times(at 3-4days, at 4-6wks and at 3-month postpartum) regarding the change of maternal role strain and their husbands' support in employed and nonemployed first-time mothers. The subjects were 133 first-time mothers who delivered vaginally at K university hospital in Deagu, Korea from Dec., 1994 to Oct., 1995. Among these 58 were employed and 75 were nonemployed first-time mothers. This instruments used to data collection in this study were by Hobbs(1968 : The Difficulty Index for First-time Parents), Staffensmeier(1982: Transition Difficulty Measure), Tayer(1976: Emotional Support from Husband), Lee, Hae Kyoung(1992 : Physical Support from Husband). The analysis of data was done with SAS/PC program which included percentage, $x^2$-test, Pearson correlation, Repeated Measure ANOVA, Time Contrast Analysis and t-test. The results were as follows : 1. There was a significant negative correlation only at 3-4days(r=-.19, P=.0265) and at 4-6wks postpartum(r=-.18, P=.0392) between maternal role strain and husband's support of the first-time mothers. Thus, the more support from husband, the less maternal role strains the first-time mothers felt. Therefore, the 1st hypothesis that "the more husband's support the first-time mother felt at all the time of testing, the less maternal role strains they got" was partially supported at 3-days and 4-6 weeks postpartum. There was no correlation between maternal role strain and t husband's support of the employed first-time mothers at al testing times(at 3-4days postpartum : r=-.95, P=.9548, at 4-6wks postpartum : r=-.0960, P=.4733 and at 3-month postpartum : r=-.05, P=7306). On the contrary, the unemployed first-time mothers felt less maternal role strain when they received more support from their husband at 3-4 days postpartum(r=-.31, P=.0073) and at 4-6wks postpartum(r=-.23, P=.0490). 2. There was no difference of maternal role strain between two groups with regards to employment status(F=.97, P=.3270). But the maternal role strains of two groups were changed differently each other over time(F=3.89, P=.00234). Therefore, the 2nd hypothesis that "there was the difference in the maternal role strains with regard to employment status and over time" was rejected. 3. There was no difference in husband's support between the employed and the nonemployed first-time mothers(F=3.06, P=.0826). But there was a significant interaction between employment status and over time(F=3.64, P=.0267), so the support from husband of the employed and the unemployed first-time mothers was changed differently each other over time. The support from husband of the employed first-time mothers was lowered significantly and continuously at 4-6wks (F=5.20, P=.0263) and at 3-month postpartum(F=6.47, P=.0137) than at 3-4 days postpartum. On the contrary, there was no difference in change of husband's support of the employed first-time mothers between the 3-4 days and the 4-6wks postpartum(F=1.70, P=.1962) and between the 3-4 days and the 3-month postpartum(F=.21, P=.6513). Mean husband's support of the nonemployed first-time mothers was raised at 4-6wks postpartum than at 3-4 days postpartum but lowed at 3-month postpartum. The support form husband of both groups was tending downwards at 3-month postpartum than at 4-6wks postpartum, but the one between two groups was changed differently each other over time. The husband's support of the employed first-time mothers(M${\pm}$SD=64. 26${\pm}$8.63) was higher than the one of the nonemployed first-time mothers(M${\pm}$SD=59.16${\pm}$11.11) (t=-2.98, P=.0035), so the 3rd hypothesis that "there was the difference in the husband's support with regard to employment status and over time" was supported. On the basis of these conclusions, the following suggestion is proposed. This study examined the change and relationship between maternal role strain and husband's support in the employed and the nonemployed first-time mothers. So the further study regarding the comparison between the employed and the nonemployed multiparas is necessary.

• Journal of Sasang Constitutional Medicine
• /
• v.21 no.3
• /
• pp.48-62
• /
• 2009

1. Objectives: The purpose of this study was to analyze the physical and psychological characteristics of each Sasang type groups which were classified by Sasang medicine specialist. 2. Methods: The subjects were 115 (85.2% of male) university students with $26.8\pm5.4$ yrs. of age and $12.9\pm1.7$ yrs. of education. We can get 30 of Soyang type, 39 of Taeeum type, 46 of Soeum type after the Sasang type classification. Their physical characteristics were measured with Bioelectrical Impedance Analysis (Inbody 720, Biospace, Seoul), and psychological characteristics with Temperament and Character Inventory (Maumsarang, Seoul). The general linear model (SPSS 12.0, SPSS Inc, Chicago) were used for the analysis with gender and age as covariance. 3. Results and Conclusions: Taeeum type group ($75.64\pm13.01$, $26.12\pm4.16$, $15.74\pm2.42$, $11.30\pm1.80$, $3.93\pm0.62$, $18.43\pm7.70$) showed significantly bigger weight, intra-cellular water, extra-cellular water, protein, mineral, body fat mass than Soeum type group ($61.32\pm8.56$, $22.54\pm3.87$, $13.70\pm2.15$, $9.74\pm1.68$, $3.35\pm0.51$, $10.79\pm3.97$). In obesity degree such as Body Mass Index and Waist-hip ratio, and circumference measures in chest, waist and hip, we found significant differences in the order of Taeeum>Soyang>Soeum. As a psychological perspectives Soyang type group ($41.90\pm13.32$) has higher NS (Novelty-Seeking) score than Soeum type group ($35.22\pm11.22$) with marginal significance (p=0.052). In sub-scale measurements Soeum type group ($10.61\pm3.69$) has significantly lower value than other two groups in P3 (Ambition). The results of present study showed that Taeeum type by specialist has same physical characteristics as previously reported QSCC II based studies. Temperament profile of each Sasang type group will serve as an important evidence for further study showing that the Sasang typology has biological basis.

• Economic and Environmental Geology
• /
• v.22 no.1
• /
• pp.1-16
• /
• 1989

Electrum-galena-sphalerite mineralization of the Yangpyeong-Weonju Au-Ag area was deposited in three stages of quartz and calcite veins which fill fault breccia zones. Fluid inclusion and stable isotope data show that ore mineralization was deposited at temperatures between $260^{\circ}C$ and $180^{\circ}C$ from fluids with salinities between 8.9 and 2.9 equivalent weight percent NaCl. Evidence of boiling indicates pressures of <50 bars, corresponding to depths of 220 to 550 m, respectively, assuming lithostatic and hydrostatic loads. Au-Ag deposition was likely a result of bolling coupled with cooling. Within stages I and II there is an apparent increase in ${\delta}^{34}S$ values of $H_2S$ with paragenetic time ; early -1.4~2.7‰ to later 6.6-9.2‰. The progressively heavier $H_2S$ values can be generated through isotopic re-equilibration in the ore fluid following removal of $H_2S$ by boiling or precipitation of sulfides. Measured and calculated hydrogen and oxygen isotope values of ore-forming fluids suggest meteoric water dominance, approaching unexchanged meteoric water values. Comparison of these values with those of other Korean Au-Ag deposits reveals a relationship between depth and degree of water-rock interaction. All investigated Korean Jurassic and Cretaceous gold-silver-bearing deposits have fluids which are dominantly evolved, meteoric water, but on1y deeper systems (${\geq}1.25km$) are exclusively gold-rich.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.7-7
• /
• 2001

The increasing interest in light weight materials coupled to the need for cost -effective processing have combined to create a significant opportunity for aluminum P/M. particularly in the automotive industry in order to reduce fuel emissions and improve fuel economy at affordable prices. Additional potential markets for Al PIM parts include hand tools. Where moving parts against gravity represents a challenge; and office machinery, where reciprocating forces are important. Aluminum PIM adds light weight, high compressibility. low sintering temperatures. easy machinability and good corrosion resistance to all advantages of conventional iron bm;ed P/rv1. Current commercial alloys are pre-mixed of either the AI-Si-Mg or AL-Cu-Mg-Si type and contain 1.5% ethylene bis-stearamide as an internal lubricant. The powder is compacted in closed dies at pressure of 200-500Mpa and sintered in nitrogen at temperatures between $580~630^{\circ}C$ in continuous muffle furnace. For some applications no further processing is required. although most applications require one or more secondary operations such as sizing and finishing. These sccondary operations improve the dimension. properties or appearance of the finished part. Aluminum is often considered difficult to sinter because of the presence of a stable surface oxide film. Removal of the oxide in iron and copper based is usually achieved through the use of reducing atmospheres. such as hydrogen or dissociated ammonia. In aluminum. this occurs in the solid st,lte through the partial reduction of the aluminum by magncsium to form spinel. This exposcs the underlying metal and facilitates sintering. It has recently been shown that < 0.2% Mg is all that is required. It is noteworthy that most aluminum pre-mixes contain at least 0.5% Mg. The sintering of aluminum alloys can be further enhanced by selective microalloying. Just 100ppm pf tin chnnges the liquid phase sintering kinetics of the 2xxx alloys to produce a tensile strength of 375Mpa. an increilse of nearly 20% over the unmodified alloy. The ductility is unnffected. A similar but different effect occurs by the addition of 100 ppm of Pb to 7xxx alloys. The lend changes the wetting characteristics of the sintering liquid which serves to increase the tensile strength to 440 Mpa. a 40% increase over unmodified aIloys. Current research is predominantly aimed at the development of metal matrix composites. which have a high specific modulus. good wear resistance and a tailorable coefficient of thermal expnnsion. By controlling particle clustering and by engineering the ceramic/matrix interface in order to enhance sintering. very attractive properties can be achicved in the ns-sintered state. I\t an ils-sintered density ilpproaching 99%. these new experimental alloys hnve a modulus of 130 Gpa and an ultimate tensile strength of 212 Mpa in the T4 temper. In contest. unreinforcecl aluminum has a modulus of just 70 Gpa.

• The Journal of Korean Society for Radiation Therapy
• /
• v.11 no.1
• /
• pp.53-59
• /
• 1999

The aim of this study is to improve the accuracy of field placement and junction between adjacent fields and block shielding through the use of a computed tomography(CT) simulator and virtual simulation. The information was acquired by assessment of Alderson Rando phantom image using CT simulator (I.Q. Xtra - Picker), determination of each field by virtual fluoroscopy of voxel IQ workstation AcQsim and colored critical structures that were obtained by contouring in virtual simulation. And also using a coronal, sagittal and axial view can determine the field and adjacent field gap correctly without calculation during the procedure. With the treatment planning by using the Helax TMS 4.0, the dose in the junction among the adjacent fields and the spinal cord and cribriform plate of the critical structure was evaluated by the dose volume histogram. The pilot image of coronal and sagittal view took about 2minutes and 26minutes to get 100 images. Image translation to the virtual simulation workstation took about 6minutes. Contouring a critical structure such as cribriform plate, spinal cord using a virtual fluoroscopy were eligible to determine a correct field and shielding. The process took about 20 minutes. As the result of the Helax planning, the dose distribution in adjacent field junction was ideal, and the dose level shows almost 100 percentage in the dose volume histogram of the spinal cord and cribriform plate CT simulation can get a correct therapy area due to enhancement of critical structures such as spinal cord and cribriform plate. In addition, using a Spiral CT scanner can be saved a lot of time to plan a simulation therefore this function can reduce difficulties to keep the patient position without any movements to the patient, physician and radiotherapy technician.