• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.1
• /
• pp.64-70
• /
• 2011

Nitrate reductase (NR) is activated by nitrogen sources (${NO_3}^-$ and ${NH_4}^+$) and irradiance. This study investigated the effects of these factors on the NR activity of Ulva pertusa (Chlorophyta) and Ecklonia cava (Phaeophyta). In addition, the ammonium (${NH_4}^+$) and nitrate (${NO_3}^-$) uptake rates of the two species were examined. U. pertusa took up most of the ${NO_3}^-$ and ${NH_4}^+$ in the medium during a 3hour incubation, while E. cava had a relatively high uptake rate after 3 hours. The NR activities of the two species were affected by the nitrogen source and irradiance and were highest when they were exposed to ${NO_3}^-$-rich medium and high irradiance. However, the patterns of NR activity differed between the two species. In ${NO_3}^-$-rich medium and high irradiance, U. pertusa achieved the highest NR activity ($2.01{\pm}0.07\;{\mu}mol$ ${NO_2}^-$ $g^{-1}$ DW $h^{-1}$) within the first 3 hours and then this activity decreased drastically. By contrast, the NR activity of E. cava ($0.36{\pm}0.04\;{\mu}mol$ ${NO_2}^-$ $g^{-1}$ DW $h^{-1}$) was constant for 12 hours. When exposed to darkness, the NR activity of U. pertusa decreased dramatically, while that of E. cava increased gradually for 12 hours. Therefore, E. cava is able to maintain NR activity during the dark because of its adequate carbohydrate reserves and substrate.

• Archives of Pharmacal Research
• /
• v.20 no.5
• /
• pp.389-395
• /
• 1997

We investigated the interaction between nitric oxide and the renin angiotensin system in regulating isolated pulmonary arterial tension and pulmonary arterial pressure (PAP) in renal hypertensive rats (RHR) made by complete ligation of left renal artery. Losartan induced a depressor response that was smaller in RHR than in normotensive rats (NR) (3.3 and 7.0 mmHg, respectively, at 3.0 mg/kg, p<0.05), and the response was significantly reduced by $N^{G}$-nitro-Larginine methyl ester (L-NAME). Angiotensin II elevated the PAP (7.6 and 10.8 mmHg at $0.1 {\mu}g/kg$; 20.3 and 23.6 mmHg at $1.0{\mu}g/kg$, respectively) and contracted the isolated pulmonary artery ($pD_2$: 8.79 and 8.71, respectively) from both NR and RHR with similar magnitude, and these effects were significantly enhanced by L-NAME in NR, but not in RHR. Acetylcholine lowered the PAP slightly less effectively in RHR than in NR (3.8 and 6.0 mmHg at 10 .mu.g/kg, respectively) and relaxed the pulmonary artery precontracted with norepinephrine in both rats with similar magnitude ($E_max$: 60.8 and 63.6%, respectively), and the effect being completely abolished after pretreatment.with L-NAME or removal of endothelial cells. These results suggest that nitric oxide interacts with renin angiotensin system to control the pulmonary vascular tension and pulmonary arterial circulation of RHR.R.

• Elastomers and Composites
• /
• v.43 no.4
• /
• pp.213-220
• /
• 2008

In this study, the effects of curing system on the hardness of rubber materials at various temperature were investigated. NR and SBR were compounded with various sulfur or peroxide content, in order to obtain various crosslink densities. The changes of hardness and crosslink density were measured as a function of temperature and the relationship was examined. The thermal stresses were also measured in order to investigate the effect of entropy as a function of temperature. The hardness of NR and SBR compounds increased with increasing temperature above room temperature, and the measured thermal stress increased as temperature increased. However, the crosslink densities were not changed by temperature change.

• Elastomers and Composites
• /
• v.36 no.2
• /
• pp.111-120
• /
• 2001

Mechanical properties and their adhesion behavior with zinc- and brass-plated steel cords of natural rubber/acrylonitrile-butadiene blend compounds were investigated as a function of blend ratio. The Mooney viscosity and stress relaxation time were found to be lowered with increasing NBR content. Tensile modulus generally increased with increasing NBR content. Tensile stress at break stayed constant up to about 40 phr and showed minimum at $50{\sim}60 phr$, and thereafter increased with increasing NBR content. Strain at break decreased linearly below 50 phr, and above the level it showed nearly constant value. Based on the abrupt drops in elastic modulus and tan ${\delta}$ peak, the glass transition temperature of NR and NBR were found to be -55 and $-10^{\circ}C$, respectively. In the case of NR/NBR blend compounds, two distinct transition points were observed and each transition position was not affected by NBR level indicating an incompatible nature of NR/NBR blend system. The pullout force and rubber coverage decreased to the level of about 40% to that of pure m compound, when the 50 phr of NR was replaced by NBR. However, the pure NBR compound showed the comparable adhesion performance with NR(${\sim}90%$). The sulfur concentration was found to become lower with the increased NBR content at the adhesion interface based on the Auger spectrometer results, representing a lack of adhesion layer formation, and this was explained for a possible cause of low adhesion performance with adding NBR.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.51-61
• /
• 2007

This paper concerns about the requirement analysis for night vision imaging system(NVIS), whose purpose is to intensify the available nighttime near infrared(IR) radiation sufficiently to be caught by the human eyes on a miniature green phosphor screen. The requirements for NVIS are NVIS radiance(NR), chromaticity, daylight legibility/readability, etc. The NR is a quantitative measure of night vision goggle (NVG) compatibility of a light source as viewed through goggles. The chromaticity is the quality of a color as determined by its purity and dominant wavelength. The daylight legibility/readability is the degree at which words are readable based on appearance and a measure of an instrument's ability to display incremental changes in its output value. In this paper, the requirements of NR, chromaticity, and daylight legibility/readability for Type I and Class B/C NVIS are analyzed. Also the rationale is shown with respect to those requirements.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.174-178
• /
• 1998

Blowout of NR and SBR vulcanizates was studied using a microwave oven. Rubber vulcanizates with different contents of carbon black (0, 30, 50, 70 phr) and various cure systems (conventional, semi-EV, and EV) were prepared. Unfilled rubber vulcanizates did not exploded by irradiation of microwave, while carbon black-filled ones exploded within 10 min. A blowout time of the carbon black-filled rubber vulcanizate decreases with an increase of the content of carbon black in the vulcanizate. A blowout temperature of the organic additive-extracted vulcanizate is higher than that of the not-extracted one, but the extracted vulcanizate blows out faster than the not-extracted one. A blowout temperature of the overcured vulcanizate is higher than that of the undercured one with the same cure system. Temperatures of unfilled SBR vulcanizates heated by the microwave irradiation are lower than those of unfilled NR ones. The carbon black-filled SBR vulcanizates blow out at higher temperatures than the carbon black-filled NR ones. Blowout times of the carbon black-filled SBR vulcanizates are longer than those of the carbon black-filled NR ones.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.593-595
• /
• 2020

본 논문에서는 5G NR 시스템을 위한 동기 신호를 이용한 cell ID 검출 방법에 대한 성능을 비교하였다. 5G NR(fifth-generation new radio) 시스템의 송신기는 SS/PBCH (synchronization signal/physical broadcast channel) 블록을 송신하며, 수신기는 수신된 SS/PBCH 블록을 이용하여 주파수 및 타이밍 오프셋 (frequency and timing offset)을 추정 할 수 있으며, cell ID (cell identity)는 PSS (primary synchronization signal)와 SSS (secondary synchronization signal)를 통해 검출할 수 있다. 본 논문에서는 cell ID 를 검출할 수 있는 방법으로서 2-stage 디코딩 방법과 결합 최대우도 결정 규칙 (joint maximum-likelihood decision rule: joint ML) 디코딩 방법을 사용하였다. Joint ML 디코딩 방법은 2-stage 디코딩 방법에 비해 더 좋은 검출 성능을 보이지만, 복잡도 측면에서는 2-stage 디코딩 방법이 joint ML 디코딩 방법에 비해 더 낮은 복잡도를 갖는 것을 확인하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.412-421
• /
• 2022

All 5G NR devices must first perform the cell search and synchronization process to communicate with the base station. In this process, PSS detection is one of the most important and difficult problems in 5G NR communication because PSS detection must first be successful in order to extract essential information from the following signals. Among the various PSS detection methods, this paper describes a cross-correlation-based detection method, and the implementation methods of the tap delay line hardware with parallelization are introduced and compared in terms of complexity and detection speed. In addition, the interface required for system configuration including the PSS detector and control software for efficient and flexible operation are also explained. In this paper, the resource usages of Xilinx's UltraScale+ FPGA are compared for various PSS detector structures and analyzed according to various parallelization levels.

• Advances in materials Research
• /
• v.3 no.3
• /
• pp.175-183
• /
• 2014

Natural rubber bound phenolic antioxidant, 2,6-di-tert-butyl-4-vinylphenol (2,6-DBVP), was prepared from natural rubber and 2,6-DBVP in both solution and melt state. The 2,6-DBVP had been synthesized from 3,5-di-tert-butyl-4-hydroxybenzaldehyde and methyltriphenylphosphonium iodide ($MePPh_3I$) by Wittig reaction ($0^{\circ}C$ for 2 hrs, $N_2$ atmosphere). The conditions for preparation of natural rubber bound 2,6-DBVP (NR-DBVP) were optimized for both solution state (1 phr BPO and 8 phr 2,6-DBVP at $70^{\circ}C$ for 2 hrs) and for melt state (1 phr BPO and 8 phr 2,6-DBVP at $70^{\circ}C$ for 10 mins, with rotor speed of 60 rpm). A thermoplastic vulcanizate was obtained using a compatibilizer, polypropylene modified with phenolic resin (PhHRJ-PP), in a closed mixer ($180^{\circ}C$ for 3 mins, rotor speed 60 rpm). The antioxidant properties of vulcanized NR-DBVP, using phenolic as the vulcanization system, were similar to NR with the conventional antioxidant BHT. In addition, the antioxidant, water leaching property of the thermoplastic vulcanizate of NR-DBVP/PP were good in comparison to a NR blend with BHT; the morphologies of these thermoplastic vulcanizates were similar.

• Elastomers and Composites
• /
• v.17 no.2
• /
• pp.77-90
• /
• 1982

The purpose of this study is to get comparative results on the combined antioxidant systems comprised of MHPPD with IPPD, MHPPD with PBN and MHIPPD with MB when they are individually added to NR and SBR compound. Vulcanization characterstics and physical properties of the combined antioxidants have been studied by means of the Mooney viscometer, the Monsanto disc rheometer and so on. According to the test results, MHPPD with IPPD system has shown faster cure rate, better optimum cure time and shorter scorch time than other systems. The vulcanizate comprised of the MHPPD with IPPD antioxidant system has taken advantage of heat resistance, fluid resistance and antiozone resistance.