• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2006년도 춘계학술발표대회 및 제10회 신소재 심포지엄 논문개요집
• /
• pp.21.1-21.1
• /
• 2006

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.773-776
• /
• 2005

In the fabrication of high performance Blue organic light emitting diode, 2-TNATA[4,4',4"-tris(2-naphthylphenyl-phenylamino)-triphenylamine] as hole injection material and NPB[N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as hole transport material were deposited on the ITO (Indium Tin Oxide)/Glass substrate by vacuum evaporation. And then, Blue color emission layer was deposited using GDI602 as a host material and GDI691 as a dopant. Finally, small molecule OLED with the structure of ITO/2-TNATA/NPB/GDI602+GDI691/Alq3/LiF/Al was obtained by in-situ deposition of Alq3, LiF and Al as electron transport material, electron injection material and cathode, respectively. Blue OLED fabricated in our experiments showed the color coordinate of CIE(0.14, 0.16) and the maximum luminescence efficiency of 1.06 lm/W at 11 V with the peak emission wavelength of 464 nm.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1103-1107
• /
• 2007

Highly efficient organic electroluminescent devices (OLEDs) based on 4,7- diphenyl-1, 10- phenanthroline (BPhen) as the electron transport layer (ETL), tris (8-hydroxyquinoline) aluminum ($Alq_3$) as the emission layer (EML) and N,$\acute{N}$-bis-[1-naphthy(-N,$\acute{N}$diphenyl-1,1´-biphenyl-4,4´-diamine)] (NPB) as the hole transport layer (HTL) were developed. The typical device structure was glass substrate/ ITO/ NPB/$Alq_3$/ BPhen/ LiF/ Al. Since BPhen possesses a considerable high electron mobility of $5\;{\times}\;10^{-4}\;cm^2\;V^{-1}\;s^{-1}$, devices with BPhen as ETL can realize an extremely high luminous efficiency. By optimizing the thickness of both HTL and ETL, we obtained a highly efficient OLED with a current efficiency of 6.80 cd/A and luminance of $1361\;cd/m^2$ at a current density of $20\;mA/cm^2$. This dramatic improvement in the current efficiency has been explained on the principle of charge balance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1378-1380
• /
• 2005

The efficiency and the optical properties of the yellow organic light-emitting devices (OLEDs) were significantly affected by the existence of the multiple quantum well (MQW) structures consisting of N, N'- bis-(1-naphthyl)-N, N'-diphenyl-1,1-biphenyl-4,4'- diamine(NPB)/5,6,11,12 - tetraphenylnaphthacene (rubrene). The maximum efficiency and the luminance of OLEDs with 3-periods of the NPB/rubrene MQWs at 41.6 $mA/cm^2$ were 3.66 cd/A and 1524 $cd/m^2$, respectively, and their Commission Internationale de l'Eclairage chromaticity coordinates were (0.34, 0.55), which indicates a yellow color. These results indicate that the efficiencies of the OLEDs by using MQW emitting layers can be improved.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.180-180
• /
• 2010

본 연구에서는 P-Type의 NiO를 Glass기판의 ITO전극위에 RF-스퍼터링 방법으로 증착하였으며, NiO 완충층의 두께 변화에 따른 OLED (Organic Light Emitting Diode) 소자의 발광 특성에 대해 연구하였다[1, 2]. NiO는 우수한 전기 광학적 특성을 가지고 있어 OLED소자의 구동전압, 발광 효율 등의 특성을 향상 시킬 수 있다[3]. NiO 완충층의 두께 변화는 스퍼터링 증착시간을 통해 5-20 nm로 조절하였으며 소자의 구조는 Glass/ITO/NiO(0~20nm)/NPB(40nm)/Alq3(60nm)/LiF(0.5nm)/Al(120nm)형태로 제작하였다. ITO/NPB 계면에 NiO 완충층을 삽입함으로써 OLED 발광소자의 구동전압을 ~8V에서 ~5V (NiO, 10nm)로 낮출 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.474-474
• /
• 2012

유기발광소자는 다른 디스플레이에 비해 높은 명암비와 색재현성의 장점을 갖는 차세대 디스플레이로서, 얇은 박막 특성을 가지고 있기때문에 모바일용 디스플레이 기술로 많이 사용되고 있다. 하지만 낮은 발광효율, 높은 구동전압 및 전압에 따른 색좌표 변화의 문제점을 가지고 있어 이를 극복하기 위한 많은 연구가 진행되고 있다. 유기 발광 소자의 발광효율을 높이며 구동 전압을 낮추기 위해 호스트물질에 다양한 도펀트를 도핑하고 있다. 높은 발광효율을 가지는 도펀트인 5,6,11,12-tetraphenylnaphthacene (rubrene)을 사용한 유기발광소자는 rubrene의 안정된 분자 에너지 레벨로 인해 전자들이 포획되는 현상이 나타나 효율이 감소되는 원인이 규명되지 않았다. 본 연구에서는 rubrene을 발광층으로 사용하여, 전공수송층인 N,N_-bis-(1-naphthyl)-N,N_-diphenyl-1,1-biphenyl-4,4-diamine (NPB)의 두께에 따른 I-V 변화와 전계발광 스펙트럼를 분석하여 두께에 따른 rubrene의 전자 포획를 관찰하였다. rubrene보다 큰 lowest unoccupied molecular orbital 에너지를 갖는 NPB와 에너지장벽으로 낮은 highest occupied molecular orbital 에너지를 갖는 4,7-diphenyl-1,10-phenanthroline을 각각 교차되게 적층한 유기발광소자의 I-V 변화와 전자 전공 재결합층의 위치변화에 따른 전계발광 스펙트럼을 비교 분석하였다. 이 결과는 발광층 내부의 rubrene의 상대적인 위치와 에너지장벽과의 상관관계에 따른 전자 포획 메커니즘을 이해하는데 도움 줄 것이다.

• 한국표면공학회지
• /
• 제47권3호
• /
• pp.104-108
• /
• 2014

To improve emission efficiency of organic light emitting devices (OLEDs), we fabricated the tandem OLED of ITO / 2-TNATA / NPB / SH-1: 3 vol.% BD-2 / Bphen / Liq / Al / $MoO_x$ (X nm) / 2-TNATA / NPB / SH-1: 3 vol.% BD-2 / Bphen / Liq / Al structure. And emission properties of single OLED and tandem OLED with $MoO_x$ thickness as charge generation layer (CGL) were measured. The current emission efficiency and quantum efficiency of tandem OLED with $MoO_x$ of 3 nm thickness were improved compare with single OLED from 7.46 cd/A and 5.39% to 22.57 cd/A and 11.76%, respectively. In case of thicker or thinner than $MoO_x$ of 3~5 nm, the current emission efficiency and quantum efficiency were decreased, because balance of electron and hole in emission layer was not matching. The driving voltage was increased from 8 V of single OLED to 15 V of tandem OLED by thickness increase of OLED. As a result, it was possible to improve the emission efficiency of OLEDs by optimized $MoO_x$ thickness.

• 한국전기전자재료학회논문지
• /
• 제19권5호
• /
• pp.437-441
• /
• 2006

The red emitting OLEDs using $Alq_3$:Rubrene-GDI4234 phosphors have been fabricated and characterized . In the device fabrication, 2- TNATA [4,4',4' - tris (2- naphthylphenyl - phenylamino ) - tripheny lamine] as the hole injection material and NPB [N,N'-bis (1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as the hole transport material were deposited on the ITO(indium tin oxide)/glass substrate by vacuum evaporation. And then, red color emissive layer was deposited using $Alq_3$ as the host material and Rubrene(5,6,11,12-tetraphenylnaphthacene)-GDI4234 as the dopants. finally, small molecule OLEDs with structure of ITO/2-TNATA/NPB/$Alq_3$:Rubrene-GDI4234/$Alq_3$/LiF/Al were obtained by in-situ deposition of $Alq_3$, LiF and Al as the electron transport material, electron injection material and cathode, respectively. Red OLEDs fabricated in our experiments showed the color coordinate of CIE(0.65, 0.35) and the maximum power efficiency of 2.1 lm/W at 7 V with the peak emission wavelength of 632 nm.

• 한국해안해양공학회지
• /
• 제19권1호
• /
• pp.1-15
• /
• 2007

서해연안역의 폭풍해일고 산정을 위한 초기 연구 단계로, 8 node 병렬 리눅스 클러스터의 효율성과 함께 황해 조석 모의결과의 신뢰성을 검토하였다. NPB 벤치마크 결과 7배에 이르는 계산 효율의 성능향상을 보였다. pADCIRC 모델을 이용한 황해 조석재현 결과는 선행된 연구들과 비교하여 만족스런 신뢰성을 나타냈다. 모델 변수 선정에 따른 영향을 살펴본 바에 따르면, 우리나라 서해연안과 같은 천해역의 조석수동역학 해석에는 수심에 따른 바닥마찰계수의 적절한 사용이 필수적인 것으로 분석되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.434-435
• /
• 2007

We have demonstrated the characteristics on the variation of hole transporting layer in blue organic light-emitting diodes (OLEDs) using new blue fluorescent emitter. We fabricated two types of hole transporting layer structures that one is 4,4',4"-Tris(N-(2-naphthyl)-N-phenyl-amino)-triphenylamine (2-TNATA) of $600{\AA}$ as a hole injection layer, N,N'-diphenyl-N,N'- (2-napthyl)-(1,1'-phenyl)-4,4'-diamine (NPB) of $200{\AA}$ as a hole transporting layer and another device is NPB of $500{\AA}$ without the 2-TNATA. The devices without the 2-TNATA showed improved characteristic of the luminance and efficiency.