• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.537-540
• /
• 1999

Effect of alignment layers on pretilt angle generation and electrical characteristics in nematic liquid crystal(NLC) by using photo-alignment techniques on polyimide (PI) surface with side chain were studied. The generated pretilt angle of the NLC on rubbed PI surface with 1-layer is almost the same as that of the 2-layers. However, the generated pretilt angle of the NLC on photo-induced PI surface with 2-layers is larger than that of the 1-layer. Therefore, the pretilt angle of the NLC on photo-induced PI surface is attributed to surface roughness due to photo-depolymerization of the polymer with UV light irradiation on PI surface. Next we observed the same characteristics of voltage-transmittance (V-T) and response time for 1- and 2-layers on PI surface. We also observed the same voltage holding ratio (VHR) characteristics for 1- and 2-layers on photo-aligned PI surface. Consequently, we suggest that the VHR of photo-aligned TN-LCD is higher than that of the rubbing-aligned TN-LCD.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.760-763
• /
• 2004

We studied the nematic liquid crystaL(NLC) aligning capabilities using the new alignment material of a nitrogenated diamond-like carbon(NDLC) thin film. The NDLC thin film exhibits high electrical resistivity and thermal conductivity that are similar to the properties shown by diamond-like carbon (DLC) thin films. The diamond-like properties and nondiamond-like bonding make NDLC an attractive candidate for applications. A high pretilt angle of about 9.9$^{\circ}$ by ion beam(IB) exposure on the NDLC thin film surface was measured. A good LC alignment is achieved by the IB alignment method on the NDLC thin films surface at annealing temperature of 200 $^{\circ}C$. The alignment defect of the NLC was observed above annealing temperature of 250 $^{\circ}C$. Consequently, the high pretilt angle and the good LC alignment by the IB alignment method on the NDLC thin film surface can be achieved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.414-414
• /
• 2007

In this study, Liquid Crystal (LC) alignment and tilt angle generation in Nematic Liquid Crystal (NLC) with negative dielectric anisotropy on the homeotropic PI surface with new ion beam exposure are reported. Also. high density of ion beam energy (DuoPIGatron type Ar ion gun) is used in this study. The tilt angle of NLC on the homeotropic Polyimide (PI) surface for all incident angles is measured about 38 degree and this has a stabilization trend. And the good LC alignment of NLC on the PI surface with ion beam exposure of $45^{\circ}$ incident angle was observed. Also the tilt angle of NLC on the homeotropic PI surface with ion beam exposure of $45^{\circ}$ had a tendency to decrease as ion beam energy density increase. The tilt angle could be controlled from verticality to horizontality. Also, the LC aligning capabilities of NLC on the homeotropic PI surface according to ion beam energy has the goodness in case of more than 1500 eV. Finally. the superior LC alignment thermal stability on the homeotropic PI surface with ion beam exposure can be achieved. For OCB(Optically Compensated Bend) mode driving, we can need pretilt angles control for fast response time. In this study, We success pretilt angles control. Consequently, this result can be applied for OCB mode.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1582-1584
• /
• 1997

We investigated the transcription of liquid crystal (LC) alignment method by using memory effect of nematic (N) LC on polyimide (PI) surface with side chain as for non-rubbing alignment techniques. That the monodomain alignment of aligned NLC is observed by polarizing microscope textures in the cells on PI surface with side chain, We obtained that the pretilt angle of NLC are generated about 3.7 degree on PI surface. We suggest that the LC alignment by using transcription aligngnment method is attributed to memory effect of NLC on PI surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.123-126
• /
• 1997

In this study, we investigated the Pretilt ang1e generation in nematic liquid crystal (NLC) by using the transcription, alignment on polyimide(Pl) surfaces. That the uniform alignment of NLC is observed by microphotograph textures in LC cells on Pl surface. We obtained that the pretilt angle of NLC are generated about 3.6$^{\circ}$on Pl surface. It is considered that the LC alignment by transcription alignment method is attributed to memory effect of LC on Pl surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.951-954
• /
• 2001

We investigated the aligning capabilities for nematic liquid crystal (NLC) using a in-situ photodimerization method on various photopolymer surfaces. High Pretilt angle of the NLC can be measured by obliquely polarized UV exposure of 30$^{\circ}$on a photo-crosslinkable polyimide (PI) based polymer surface for 3 min. The pretilt angle of the NLC generated on the photopolymer surface using the in-situ photodimerization method was higher than that of a blending photopolymers (PI and cinnamate materials).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.127-129
• /
• 1997

The high pretilt angles in nematic liquid crystals (NLCs) have been generated on robbed polythiophene (PTP) surfaces with alkyl chain lengths. The pretilt angle of the NLC was observed on unidirectionally rubbed PTP surfaces with alkyl chains with more than 9 carbon atoms. We obtained the Pretilt angle of 15~40$^{\circ}$ on rubbed PTP surfaces with 10 carbon atoms in the a1ky1 chain. Also, the pretilt angles of 65~80$^{\circ}$ of NLC were obtained on rubbed PTP surfaces with 11 and 12 carbon atoms in the alkyl chain. We suggest that this high pretilt angle generation in NLC is due to the surface-excluded volume effect by the alkyl chain lengths between. the LCs and the PTP surfaces. Finally, we conclude the odd-even effect on rubbed PTP surfaces is clearly contributed to the pretilt angle generation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.8
• /
• pp.866-870
• /
• 2004

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The NLC pretilt angles on thin plastic substrates generated higher than that on glass substrate. Also, EO characteristics of the TN-LCD with a rubbed PI surface based on polymer substrate are almost the same as that of the TN-LCD with a rubbed PI surface based on glass. However, the transmittances of the TN-LCD with a rubbed PI surface based on polymer is less than that with a rubbed PI surface based on g1ass.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1388-1390
• /
• 1998

In this paper, we investigated the monodomain alignment of nematic liquid crystal(NLC) in the cell fabricated by transcription alignment method on polyimide(PI) surface with side chain. The LC alignment produced by the transcription alignment method is attributed to a memory effect of the NLC on PI surfaces. We observed that the pretilt angle of NLC is generated about $3.7^{\circ}$ with transcription alignment on PI surface. Also, we obtained the good electro-optical(EO) performance of twisted nematic(TN)-liquid crystal display(LCD) by transcription alignment method on PI surface.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1395-1397
• /
• 1998

In this paper, we studied the liquid crystal(LC) alignment and generation of pretilt angle in nematic (N) LC with oblique p-wave polarized ultraviolet (UV) light irradiation on the two kinds of the polyimide (PI) surface. The monodomain alignment of NLC is obtained with oblique p-wave polarized UV light irradiated on PI surface at 5$\sim$60min. We obtained that the pretilt angles of the NLC is generated about $2.1^{\circ}$ with angle of incidence of $30^{\circ}$ at 20min. Also, the pretilt angle of NLC decreases with increasing the imidization temperature on PI surface.