• Health Policy and Management
• /
• v.25 no.2
• /
• pp.140-148
• /
• 2015

Vaccination is the most powerful and useful preparation against infectious diseases. However, developing vaccines costs a lot and requires extensive long-term efforts. Therefore, the government should research and develop vaccines with a national-level policy. To greatly enhance the success rate of vaccine development, the policy should be set up considering priorities such as the current status of domestic research, the importance for public health, the urgency of research. The Delphi technique was utilized to draft this survey, through a brainstorming stage, then two inquiries, and finally the final panel meeting where unresolved items were discussed, to draw the conclusion. Among the results, firstly, the highest ranked item on centralized fields for vaccine development by the Ministry of Health was 'self-sufficiency of vaccines.' Secondly, 'emerging infectious disease' was most highly ranked in prioritized fields of vaccine development and research. Thirdly, for the vaccine that needs to be improved and developed further by the government to improve its efficacy and safety, BCG (Bacille de Calmette) for tuberculosis was ranked the highest on both types (intradermal and subcutaneous injection) from National Immunization Programme (NIP) and non-NIP. As for the high risk pathogens, 'anthrax' and 'smallpox' were first and second, consecutively. Lastly, 'development and control of vaccine candidates' was ranked the highest for the area in need for technique development in order to improve domestic vaccine's research level. The results of this study will be put to good use as basic data for the national vaccine research and development (R&D) policy of the country. This study was first step and more studies should be carried out for the final decision of the national vaccine R&D priority.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.42-48
• /
• 2012

The present study was motivated by the needs to make diversified scientific approaches toward influential factors like human, technical, organization, policy and environmental on the basis of the specialized information concerning the cause for industrial accidents in a measure to prevent the falling accident which has the biggest priority among the three major frequent industrial accidents. In this connection, diverse policies have been practiced in the meantime, with little effects in fact to reduce occurrence of industrial accidents, seemingly because such policies have been practiced on the direct dimension, instead of tries to nip in the bud of fundamental causes. This study was thus conducted with a view to determine the causes that have influence on falling accidents from the overall context and unearth the factors requiring management with priority. For this aim, "Fall from Height"(2003), a study by HSE, UK was applied to various conditions of korea as an experiment to search for fundamental causes for falling accidents. The major findings of this study might be summed up as exploring a main critical path that has influence upon falling accidents and suggesting effective ways to cut down through the critical path.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.66-69
• /
• 2002

This paper presents deposition and characterizations of microcrystalline silicon$({\mu}c-Si:H)$ films prepared by hot wire chemical vapor deposition at substrate temperature below $300^{\circ}C$. The $SiH_{4}$ concentration$[F(SiH_{4})/F(SiH_{4})+F(H_{2})]$ is critical parameter for the formation of Si films with microcrystalline phase. At 6% of silane concentration, deposited intrinsic ${\mu}c-Si:H$ films shows sufficiently low dark conductivity and high photo sensitivity for solar cell applications. P-type ${\mu}c-Si:H$ films deposited by Hot-Wire CVD also shows good electrical properties by varying the rate of $B_{2}H_{6}$ to $SiH_{4}$ gas. The solar cells with structure of Al/nip ${\mu}c-Si:H$/TCO/glass was fabricated with single chamber Hot-Wire CVD. About 3% solar efficiency was obtained and applicability of HWCVD for thin film solar cells was proven in this research.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.387-390
• /
• 2002

This paper presents deposition and characterizations of microcrystalline silicon(${\mu}$c-Si:H) films prepared by hot wire chemical vapor deposition at substrate temperature below 300$^{\circ}C$. The SiH$_4$ concentration[F(SiH$_4$)/F(SiH$_4$).+(H$_2$)] is critical parameter for the formation of Si films with microcrystalline phase. At 6% of silane concentration, deposited intrinsic ${\mu}$c-Si:H films shows sufficiently low dark conductivity and high photo sensitivity for solar cell applications. P-type ${\mu}$c-S:H films deposited by Hot-Wire CVD also shows good electrical properties by varying the rate of B$_2$H$\_$6/ to SiH$_4$ gas. The solar cells with structure of Al/nip ${\mu}$c-Si:H/TCO/g1ass was fabricated with single chamber Hot-Wire CVD. About 3% solar efficiency was obtained and applicability of HWCVD for thin film solar cells was proven in this research.

• Journal of Environmental Science International
• /
• v.17 no.3
• /
• pp.269-273
• /
• 2008

The objective of this study was to evaluate the relationship between nutrients and phytoplankton. This study was done by the comparison to two costal areas Mokpo, which inflow fresh water, and Wando. In August, salinity of the sea water decreased by 3.5-4.5%o in Mokpo coastal area, but was not nearly decreased in Wando coastal area. This suggests a lot of fresh water inflow in Mokpo coastal area. DIN and DIP were decreased by water temperature increasing in Wando. However, in Mokpo, DIN and DIP were increased greatly during the summer season. Nitrogen was limited to a 10 NIP ratio especially during the summer season in Wando coastal area while phosphorus in Mokpo coastal area was limited with over 28 N/P ratio in all the seasons. Coefficient of determination$(r^2)$ between DIP and Chl.-a was 0.91 in Mokpo coastal area. On the other hand, Coefficient of determination$(r^2)$ between Chl.-a and DIN, DIP were 0.93 and 0.89, respectively, in Wando coastal area. These results suggest DIP in Mokpo and DIN and DIP in Wando might be limited at the increase of phytoplankton.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.11 no.2 s.24
• /
• pp.23-36
• /
• 1987

The purpose of the suudy was to develop a computer program for pattern mating of women's pant's. Computerization of the pattern making process was expected to provide higher accuracy and efficiency in pattern mating. The VAX-11/750 Computer and the CALCOMP PLOTTER 965 were used in this study. The procedures of the study were as follows : 1. A slacks pattern was selected. 2. The co-ordinate points were indicated relative location of all necessary in draffing. Total sixty co-ordinate points were instituted from (AX(1), AY(1)) to (AX(24), AY(24)), from (BX(1), BY(1)) to (BX(36), BY(36)). 3. A program for drafting was developed. Refer to (Table 3). 4. The procedures of drading of standard size were accomplished by using same method. The program was developed to drafting pattern for women by putting indivisual body measurement. The body measurements for stacks pattern were as follows : slacks length. Croach length. Hip length. nip circumference. waist circumference.

• Applied Biological Chemistry
• /
• v.21 no.3
• /
• pp.185-192
• /
• 1978

Three herbicides including nitrofen, alachlor and butachlor f?ere applied to farm soils of oil-bearing crops rape, soybean and paddy rice and their residual levels in the soil and seeds were determined by ECD-attached gas chromatograph without hydrolysis. Applied herbicides were decreased abruptly 2 weeks after application and slowly thereafter, reaching below 10% level while the extent of disappearance varied depending on the herbicides, crops and soil conditions. The herbicides were not detected at all in the seeds of tested crops within the detection limit of the analytical methods employed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.49-57
• /
• 2001

This study was performed to identify the effect of calendering variables on the properties of coated paper such as sheet gloss, surface roughness, opacity, etc. The effect of calendering variables including the number of nips, pressure, machine speed and moisture content on the properties of coated paper was investigated. The calender was installed with two steel rolls and one cotton-made roll. With this calender, the coated sheets were passed through the calender from 1 to 4 times, applying the linear pressure on calender rolls, 5 through 100kg/cm and operating the machine speed 3 to 12m/min. Also, the moisture content of coated sheet was varied about 5 and 10%. It was found that sheet gloss and surface roughness of coated paper was increased with increasing the number of passing nips, linear roll pressure and the moisture content of coated paper. But it was shown that the opacity and brightness of coated paper were decreased under the above conditions due to the blackening. It was also suggested that the soft nip possibly increased the thermoplasticity of coating layer with the heat of steel roll, resulting in the reinforcement of surface properties positively. The sheet gloss and surface roughness of coated paper could be improved by the longer dwell time over the rolls.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.2
• /
• pp.85-93
• /
• 2007

The printed mottle is recognized as the most common printing problems in using coated paper and one of the most difficult problems to solve in offset printing. Printed mottle is caused by an uneven penetration of ink into the paper and binder migration. The prevention of printed mottle requires of coating color formation, especially the minimum of binder migration. Printing worked by interaction of printing ink, coated paper and printing pressure. In this study, we investigated the effect of the properties changing of coated paper and printing conditions such as ink dispersion, nip condition and amount of ink transfer.

• Macromolecular Research
• /
• v.12 no.5
• /
• pp.501-506
• /
• 2004

We have investigated the spectral properties of DNA, including its electric absorption, circular and linear dichroism (CD and LD), and fluorescence emission, in the DNA-linear polyethyleneimine (LPEI) and DNA-branched polyethyleneimine (BPEI) complexes at various polymer concentrations. The spectral properties of both complexes are similar. We observed a relatively moderate change in the absorption and CD spectra at low amine/DNA phosphate (NIP) ratios (< 0.5), followed by a drastic collapse within the N/P range from 0.8 and 1.0. The absorption and CD spectra recovered as the N/P ratio increased to ca. 1.2. In contrast, the LD and emission of ethidium intercalated between the DNA bases decreased almost linearly at N/P ratios between 0.0 and 1.0. These spectra never recovered at higher N/P ratios. We believe that the moderate changes in the spectrum at low N/P ratios occurred because of electrostatic interactions between DNA and BPEI, while the collapsed spectra at N/P ratios between 0.5 and 1.5 occurred because of condensation/aggregation of the DNA. Considering the structure of the polymers, we suggest that the secondary amino group of LPEI and all three amino groups of BPEI are equally involved in DNA condensation.