• 제목/요약/키워드: NIER 시험모드

검색결과 4건 처리시간 0.025초

경유자동차에서 배출되는 NO2/NOX 비율 특성 (Experimental Study on the NO2/NOX Ratio from Exhaust of Diesel Vehicles by Chassis Dynamometer)

  • 김선문;김정화;정성운;성기재;김정수;김인구
    • 한국수소및신에너지학회논문집
    • /
    • 제28권2호
    • /
    • pp.220-224
    • /
    • 2017
  • Nitrogen dioxide ($NO_2$) is an important urban pollutant in Korea. Expecially, diesel vehicles are responsible for the most traffic rated nitrogen oxide ($NO_X$) emission, including nitric oxide (NO) and nitrogen dioxide ($NO_2$). Though nitrogen oxide ($NO_X$) emission from vehicle was applied a strict enforcement of emission standard, the specific $NO_2$ fraction in $NO_X$ ($NO_2/NO_X$) from various types of diesel vehicles was not understood. In order to investigate the fraction of $NO_2/NO_X$, the vehicle emission study was carried out at the facility of Transport Pollution Research Center (TPRC), National Institute of Environmental Research (NIER), Korea. Three different types of diesel vehicles(VAN, SUV, passenger) were tested on the NIER driving mode. The result of $NO_2/NO_X$ ratio was over 0.1 for all test vehicles and the highest $NO_2$ emission was observed at the van vehicle. The observation was showed that the emission trend of $NO_2/NO_X$ for passenger and SUV vehicles were inversely proportional. Also, as the emission standard has been strengthen, the emission rate of $NO_2$ has been decrease.

중형저상버스의 개별주행모드에 따른 연료소비율 평가 (Evaluation of the Impact of Fuel Economy by Each of Driving Modes for Medium-Size Low-Floor Bus)

  • 정재욱;노윤식;안병규
    • 한국산학기술학회논문지
    • /
    • 제17권9호
    • /
    • pp.133-140
    • /
    • 2016
  • 국토교통부에서는 교통약자의 이동 편의 증진을 위하여 승하차에 편리한 저상버스를 도입하였다. 표준모델로 고시된 저상버스는 11 m 급, 압축천연가스(CNG, Compressed Natural Gas)를 사용하는 차량으로 개발되었다. 11 m 급 저상버스는 길이 좁은 농어촌 및 산간지역 도로여건에서의 운행과, CNG 연료의 특성상 충전시설의 한계로 인하여 연료보급의 단점을 가지고 있다. 본 연구에서는 국토교통부에서 교통약자의 이동편의 증진을 위해 진행하는 중형저상버스 표준모델 기술개발 과제의 일환으로 (주)타타대우상용차에서 제작한 LF-40을 대상으로 공차(CVW, Curb Vehicle Weight), 반적차(HVW, Half Vehicle Weight), 적차(GVW, Gross Vehicle Weight) 3가지 중량조건으로 실도로 타행주행을 통하여 주행저항 값을 취득하였고, WHVC, NIER-06, 복합 에너지 소비효율 측정 대상차량 외 차량의 에너지 소비 효율을 측정하기 위한 시험 방법인 정속주행 (60 km/h)모드를 사용하였다. 시험 결과 공차상태의 연비가 가장 좋았으며, 대표적으로 WHVC 모드에서는 공차대비 반적차는 3.5 %, 공차대비 적차는 12 % 연비소모율의 차이를 보였다. 60 km/h 정속 주행모드에서는 다른 시험모드와 다르게 공차보다 반적차의 연비가 높은 것으로 측정되었다. 추후 배출가스 데이터의 분석이 필요할 것으로 판단된다.

차량인증모드와 실도로 주행모드별 국내 경유 소형화물 자동차의 온실가스 배출특성 분석 (A Study of Greenhouse Gas Emission Rates from LDTs according to Emission Certification Modes and Real-World Vehicle Driving Cycles in Korea)

  • 김지영;서충열;손지환;박준홍;문태영;이상은;김정수
    • 한국기후변화학회지
    • /
    • 제3권4호
    • /
    • pp.235-243
    • /
    • 2012
  • 자동차 분야는 온실가스 배출량의 상당 부분을 차지하는 주요 배출원으로써, 우리나라는 온실가스 저감을 위하여 2020년까지 교통부문에서는 BAU 대비 34.3%를 감축하는 것을 목표로 하고 있다. 이러한 목표달성을 위하여 2012년부터 자동차 온실가스 배출기준을 적용하고 있으며, 차기 온실가스 배출기준을 마련하는데 있어 소형 화물차량에 대한 대상차종 포함 여부가 검토되고 있다. 이에 본 연구에서는 경유 소형화물 자동차를 대상으로 주행모드에 따른 온실가스 배출특성을 분석하였다. 차속모드인 NIER 모드를 이용하여 분석한 결과, 자동차 온실가스 배출량은 차속이 증가할수록 감소하는 반비례 경향을 나타내었으며, $CO_2$의 경우 일정차속(65.4 km/h) 이상의 고속구간에서는 배출량이 증가하였다. 자동차 주행거리에 따른 온실가스 배출량 증가는 나타나지 않았으며, 각국의 온실가스 배출량 측정모드를 적용한 결과, 유럽에서 적용하고 있는 NEDC 모드에서 가장 높게 나타났다. 또한, 복합모드 시험 시 $CO_2$ 배출이 CVS-75 모드에 비하여 8% NEDC 모드에 비하여 14% 적게 나타났다.

국내에서 운영중인 시내버스의 시험모드에 따른 배출특성 비교 연구 (A Study on the Comparison of Emission Characteristics of In-Use Urban Bus by Test Modes)

  • 전상우;엄명도;홍지형
    • 한국대기환경학회지
    • /
    • 제26권4호
    • /
    • pp.403-411
    • /
    • 2010
  • Recently, emission tests for heavy-duty vehicles have been conducted by heavy-duty engine dynamometer. But, it contains weaknesses that present inconveniences to install and uninstall engines and limitations to reflect on practical characteristics for vehicle driving. On the other hand, chassis dynamometer test is able to differentiate characteristics of real driving patterns due to the reason that vehicles can be examined by utilizing chassis dynamometer. This study aimed at comparing the characteristic of emitting regulatory substances of urban buses on Heavy-duty chassis dynamometer. The characteristic was analyzed based on vehicle speed by using both domestic and overseas developed heavy-duty vehicle test modes. As a result, this work attempted to investigate possibilities to take advantage of Heavy-duty vehicle test modes as a method to manage emissions from heavy-duty vehicles.