• 대한치과보철학회지
• /
• 제35권4호
• /
• pp.647-661
• /
• 1997

The resin modified glass ionomer cements(RMGICs) have been used for years since 1989. Recently it has been developed for luting of fixed restorations. To evaluate the bond strength and marginal leakage of RMGICs for luting usage, the 80 extracted human molars which had uniform area of exposed dentin were cemented with 3 types of RMGICs(Fuji Duet, Advance, Vitremer), a conventional Glass Ionomer Cement(GIC-Fuji I), and a resin cement (Panavia 21) to base metal alloy(Ni-Cr-Be). After thermocycling the specimens were immersed in basic fuschin dye for measuring marginal leakage. The shear bond strength was measured with Instron and the maximum dye penetration was measured to 0.1mm. The types of fractured patterns were determined with stereoscope(${\times}7.5$). The results are as follows. 1. The difference between 3 RMGICs and a conventional GIC in shear bond strength was not statistically significant. It seemed that RMGICs had lower shear bond strength than resin cement. (p<0.01) 2. The mean scores of marginal leakage had no significant difference between the resin cement and 3 RMGICs but it was much higher in conventional GIC than the RMGICs (p<0.05) 3. It was determined that the manufacturer and the methods of dentin pretreatment determined the pattern of fracture surfaces and the frequency of adhesive failure between teeth and 3 RMGICs standed as in following order - Vitremer, Advance, Fuji Duet. (p<0. 01) When the fracture pattern was analyzed, it could be said that the materials and the method of dentin pretreatment have much effect on bonding states. This means that the dentin bonding agents should be improved. But the limited products in this experiment can not evaluate the physical properties of the entire RMGICs. Therefore a further study which can evaluate various RMGICs should be in progress to develope better cements.

• 한국해양학회지
• /
• 제9권1_2호
• /
• pp.31-38
• /
• 1974

해저퇴적물의 물리화학적인 성질은 저서생물의 환경요인의 하나로 알려져 있다. 아울러 저서어종의 어장형성과도 밀접한 관계가 있다. 한국 근해 퇴적물의 물리적인 특성은 Zenkevitch(1963), 박과 송(1972)이 동해안의 일부에서 조사연구하였고 박과 송(1971), 권과 박(1973)이 남해안에서의 해저퇴적물 입도분석을 발표한 바 있다. 한국 연안해역 해저퇴적물의 지화학적인 특성은 Nino et al(1969)이 동해 저질중의 유기태탄소의 함량 Ishibashi and Ueda(1955, 1993)의 화학적 특성, 그리고 최(1971) 에 의한 동해 해저퇴적물의 지화학적 성분의 함량과 분포에 관한 발표가 주를 이루고 있다. 행암만과 가덕도 일원에 걸쳐 조사한 결과에 의하면 행암만내의 조석현상등에 의한 해수의 유동은 만의 동단으로 향하는 것으로 나타났다.(강, 1972, 수산진흥원, 1972). 따라서 본 연구의 목적은 육상 토사와 이에 따른 각종 중금속류의 연안유입 및 각종 산업활동에 기인하는 여러 가지 중금속류의 해수내 유입여하에 따른 침전현상과 이동범위를 조사 연구하는데 있었다.

• 한국대기환경학회지
• /
• 제27권5호
• /
• pp.523-533
• /
• 2011

This study had the aim of characteristics of $PM_{10}$ in subway cabins. $PM_{10}$ was measured by times of day (rush and non rush hours) and seasons with real time $PM_{10}$ sampler on the subway cabins of line 7. Filter samples were collected for evaluation of their elemental composition as well as identification of major sources of $PM_{10}$ using a receptor model, PMF. $PM_{10}$ concentration were the highest in the winter season both in the rush and non rush hours at 152.8 ${\mu}g/m^3$, 90.2 ${\mu}g/m^3$ respectively. The $PM_{10}$ concentrations in rush hour were 30% higher compared to non rush hours. Based on the chemical information, the composition rare of inorganic elements was 52.5%, anions were 10.2% and others were 37.3%. Fe was the most abundant element and significantly correlated (p.0.01) with Mn (r=0.97), Ti (r=0.91), Cr (r=0.88), Ni (r=0.89) and Cu (r=0.88). Characterized $PM_{10}$ sources by PMF in the cabin were soil and road dust related sources (27.2%), railroad related sources (47.5%), secondary nitrate sources (16.2%) and a Cl-factor mixed with a secondary sulfate source (9.1%).

• Journal of Nutrition and Health
• /
• 제6권3호
• /
• pp.17-20
• /
• 1973

Quantitative analysis was achieved by gas-liquid chromatographic method (GLC) with a single column system of OV-17 for 16 of free amino acids in Korean green tea and the contents of mineral in it was determined by atomic absorption flame emission. The results are summarized as follows: 1) Korean green tea contained Mn 1% or over out of the total ash content and $0.05{\sim}0.20%$ in the water extraction, as the major mineral. 2) Ba, Cr, Ni, Pb and V were analyzed also by small quantities relatively and Co, Tin and Ywere not detected in the water extraction. 3) GLC indicated the presence of 16 components in free ammo acids. 4) The quantities of free amino acids in Korean green tea were determined $2.96{\sim}6.61%$ Alanine, $1.01{\sim}l.89mg%$ Glycine, $2.07{\sim}7.81mg%$ Valine, $1.27{\sim}8.76mg%$ Leucine and Isoleucine, $94.31{\sim}316.27mg%$ Threonine, $9.10{\sim}39.91mg%$ Serine, $2.18{\sim}36.76mg%$ Hydroxyproline, $2.72{\sim}5.90mg%$ Proline, $39.64{\sim}70.02mg%$ Aspartic Acid, $25.93{\sim}101.28mg%$ Glutamic Acid and Lysine, $8.32{\sim}18.30mg%$ Phenylalanine and Tyrosine in trace amount. 5) The total free amino acid contents in Korean green tea ranged from 207.24mg% to 516.06mg% and Moo-Deoung tea contained outstandingly high, 516 mg% or over.

• The Journal of Advanced Prosthodontics
• /
• 제3권4호
• /
• pp.186-189
• /
• 2011

PURPOSE. Porcelain fused to metal (PFM) crowns provide the best treatment option for teeth that have a large or defective restoration. More than 20% of teeth with PFM crowns or bridges require non-surgical root canal treatment (NSRCT). This may be due to the effect of restorative procedures and the possible leakage of bacteria and or their by-products, which leads to the demise of the tooth pulp. Thus, this study was planned to compare the ability of the restorative materials to seal perforated PFM specimens. MATERIALS AND METHODS. The study evaluates the ability of amalgam, composite or compomer restorative materials to close perforated PFM specimen's in-vitro. Ninety PFM specimens were constructed using Ni-Cr alloys and feldspathic porcelain, and then they were divided into 3 groups: amalgam (A), composite + Exite adhesive bond (B) and compomer + Syntac adhesive bond (C). All the PFM samples were embedded in an acrylic block to provide complete sealing of the hole from the bottom side. After the aging period, each group was further divided into 3 equal subgroups according to the thermocycling period (one week for 70 cycles, one month for 300 cycles and three months for 900 cycles). Each subgroup was put into containers containing dye (Pelikan INK), one maintained at $5^{\circ}C$ and the other at $55^{\circ}C$, each cycle for 30 sec time. The data obtained was analyzed by SPSS, 2006 using one way ANOVA test and student t-test and significant difference level at (P<.01). RESULTS. The depth of dye penetration was measured at the interfaces of PFM and filling materials using Co-ordinate Vernier Microscope. The lowest levels of the dye penetration for the three groups, as well as subgroups were during the first week. The values of dye leakage had significantly increased by time intervals in subgroups A and C. CONCLUSION. It was seen that amalgam showed higher leakage than composite while compomer showed the lowest level of leakage.

• 한국토양비료학회지
• /
• 제49권5호
• /
• pp.524-530
• /
• 2016

Agricultural soils near or around industrial complexes can contain a certain amount of heavy metals that readily enter the food chain and negatively affect human health. Therefore, we conducted the study to investigate the distribution of selected heavy metals, including arsenic (As), cadmium (Cd), chromium (Cr), nickel (Ni), lead (Pb), mercury (Hg), and zinc (Zn), in farm-land soils around fifteen industrial complexes in the southwestern provinces, Korea. The concentrations of heavy metals in the soil samples were determined by the pseudo-total aqua regia (3 HCl : $1HNO_3$) digestion procedure. The heavy metal concentrations in most soils examined did not exceed the levels of Soil Contamination Warning Standard (SCWS) for agricultural lands (Region 1) presented in Soil Environment Conservation Law (SECL) established by Ministry of Environment (MOE), Korea. However, only one sampling site showed higher As amount ($27.1mg\;kg^{-1}$) than the SCWS level of As ($25mg\;kg^{-1}$). Pollution index (PI) for heavy metals did not exceed 1.0. The PI values were significantly positively correlated (p < 0.01) with the heavy metal concentrations. In particular, the values of correlation coefficient between the Cd and Pb concentrations and the PI values were higher than those estimated from other combinations, and thus the amounts of Cd and Pb in the agricultural soils highly affected the PI values for the heavy metals.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1244-1245
• /
• 2008

Recently, piezoelectric transformer is applied to wide fields. Multi layer piezoelectric transformer has the advantage of high step up ratio, electromechanical coupling coefficient(Kp) and mechanical quality factor(Qm), but is indicated of peeling-phenomenon of electrode, rising sintering temperature made price of costly electrode. So in this study, it discuss on method for fabrication of rosen type piezoelectric transformers. For the fabrication as rosen type piezoelectric transformers, synthesized the powder using 0.01Pb$(ni_{1/3}Nb_{2/3})O_3$ - 0.08Pb$(Mn_{1/3}Nb_{2/3})O_3$ - 0.91Pb$(Zr_{0506}Ti_{0496})O_3$ (abbreviated as PNN-PMN-PZT) ceramics. The density, microstructure, dielectric and piezoelectric properties as a function of sintering temperature were investigated. The results indicated that the optimized properties of ceramics were obtained at sintering temperature of 1200$^{\circ}C$, showed the value of $d_{33}$=273pC/N, $K_p$=0.60 $Q_m$=1585, ${\varepsilon}_r$=1454, density=7.917$g/cm^3$ and $tan{\delta}$=0.0064.

• Natural Product Sciences
• /
• 제26권1호
• /
• pp.50-58
• /
• 2020

The study was conducted for quantitive determination of macronutrients, micronutrients and heavy metals present in Spilanthes acmella Hutch and Dalz, a traditionally used important medicinal plant. The results illustrated the presence of substantial amounts of essential nutrient elements in different parts of the plant. K and Mg were detected in the range between 36.35 ± 1.01 to 67.78 ± 1.33 g/kg and 2.17 ± 0.13 to 7.02 ± 0.84 g/kg of DWS respectively. While the essential micronutrients Fe, Na, Mn, Zn and Cu were detected in the range between 62.62 ± 12.72 to 856.95 ± 76.61 mg/kg, 365.47 ± 23.84 to 633.03 ± 38.12 mg/kg, 51.66 ± 7.77 to 186.33 ± 13.92 mg/kg, 41.87 ± 2.85 to 53.89 ± 3.79 mg/kg and 18.49 ± 2.07 to 48.71 ± 4.89 mg/kg of DWS respectively. Besides, heavy metals (Cd, Ni and Pb) detected in some of the plant samples were beyond the maximum permissible limit (MPL) of FAO/WHO for herbal medicines. The concentrations of the essential nutrient elements except zinc were significantly different in different parts of the plant (p < 0.001). Further variation in the concentrations of the elements in the plant was observed with respect to seasonal changes and geographical conditions. Nevertheless the findings corroborate ethnomedicinal significance of the plant and signify the possibilibity of utilizing its standardized products for preparation of food supplements as well as multidimensional therapeutic herbal medicines.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1996년도 추계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.6-6
• /
• 1996

Ceramic based nanocomposite, in which nano-sized ceramics and metals were dispersed within matrix grains and/or at grain boundaries, were successfully fabricated in the ceramic/cerarnic and ceramic/metal composite systems such as $Al_2O_3$/SiC, $Al_2O_3$/$Si_3N_4$, MgO/SiC, mullite/SiC, $Si_3N_4/SiC, $Si_3N_4$/B, $Al_2O_3$/W, $Al_2O_3$/Mo, $Al_2O_3$/Ni and $ZrO_2$/Mo systems. In these systems, the ceramiclceramic composites were fabricated from homogeneously mixed powders, powders with thin coatings of the second phases and amorphous precursor composite powders by usual powder metallurgical methods. The ceramiclmetal nanocomposites were prepared by combination of H2 reduction of metal oxides in the early stage of sinterings and usual powder metallurgical processes. The transmission electron microscopic observation for the $Al_2O_3$/SiC nanocomposite indicated that the second phases less than 70nm were mainly located within matrix grains and the larger particles were dispersed at the grain boundaries. The similar observation was also identified for other cerarnic/ceramic and ceramiclmetal nanocornposites. The striking findings in these nanocomposites were that mechanical properties were significantly improved by the nano-sized dispersion from 5 to 10 vol% even at high temperatures. For example, the improvement in hcture strength by 2 to 5 times and in creep resistance by 2 to 4 orders was observed not only for the ceramidceramic nanocomposites but also for the ceramiclmetal nanocomposites with only 5~01%se cond phase. The newly developed silicon nitride/boron nitride nanocomposites, in which nano-sized hexagonal BN particulates with low Young's modulus and fracture strength were dispersed mainly within matrix grains, gave also the strong improvement in fracture strength and thermal shock fracture resistance. In presentation, the process-rnicro/nanostructure-properties relationship will be presented in detail. The special emphasis will be placed on the understanding of the roles of nano-sized dispersions on mechanical properties.

• 자원환경지질
• /
• 제33권3호
• /
• pp.181-193
• /
• 2000

This study was undertaken to evaluate the drinking water quality based on physicochemical properties and chemical compositions of the supply water in the Daedeok Campus, and to verify the analytical reliabilities of ICP-MS and IC equipped in the Central Research Facilities at Chungnam National University , Korea. The supply water belongs to $Ca^{2+}-({HCO_3}^-+{SO_4}^{2-})$type, whereas the original water from the Daecheong lake belongs to $(Ca^{2+}-(Mg^{2+})-{HCO_3}^-$ type. Generally, temperature (14.1$^{\circ}C$), pH (6.95), Eh (0 mV), electrical conductivity (117${\mu}$S/cm) and TDS (86.975mg/l) of supply water were higher than those of original lake water . Results using WATEQ4F revealed that potentially toxic ions of the supply water might exist mainly as free metals ($M^{2+}$) and a small amount as ${CO_3}^{2-}$ and $OH^-$ complexes. Also, the water composition belongs to the kaolinite field. Calculated average enrichment indies of the supply water normalized to lake water for anions, mamor cations, toxic cations and total ions are 1.05 , 1.56, 13.05 and 1.17 , respectively. Those values of the ground water in the Daedeok Campus showed 1.71, 4.78, 5.71 and 2.49 , respectively. However , contents of all constituents of these water are within the drinking water standard. All samples were filtered before the chemical analysis. Pale yellow or yellowish brown colored materials of colloidal particles coated the filter paper to thickness of 0.02 to 0.2mm. these are mainly Fe-Cy-Zn compounds with traces of Ni and Pb, the net weights of which compounds range from 0.01to 3.20mg/l. Most elements did not show any conceivable filtering effect of Cu, Fe and Zn. Especially, mean concentration of total Fe decreased considerably from 168.52${\mu}g$/lto 42.58${\mu}g$/l by filtering .