• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.167-172
• /
• 2012

In this paper, we analyze the antenna performance variation by the ferrite absorbers which are widely used to optimize the antenna performance in near-field communications(NFC). Using various commercial absorbers, it was confirmed that the absorbers affect the electric performance of NFC antenna, and how to experimentally analyze the electrical influence of the absorbers in NFC antennas is proposed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.2
• /
• pp.149-155
• /
• 2014

In this paper, we study the complex mobile antenna for WPT(Wireless Power Transfer) with NFC(Near Field Communication) of inductive coupling using FPCB which has half thickness compared with the existing coil type antennas. Considering the pattern thickness of loop antenna, the analysis of electromagnetic wave absorber and battery's influence, absorber thickness, the ranges of design parameters are obtained. The proposed antenna has 0.45 mm thickness using single layer 3 oz FPCB and absorber. From measurement, the characteristics of NFC antenna can be satisfied with the specifications of EMVCo. and domestic mobile telecommunication and the transmission efficiency of the proposed WPT antenna is 68.1 % which is competitive with the existing coil type antenna. From the results of this paper, it has been confirmed that the proposed antenna can be used as the WPT and NFC antenna for mobile phone. Key words: Wireless Power Transfer, Near Field Communication, Mobile Phone Antenna, Absorber, FPCB.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.1
• /
• pp.68-75
• /
• 2007

A single chip NFC transceiver supporting not only NFC active and passive mode but also 13.56MHz RFID reader and tag mode was designed and fabricated. The proposed NFC transceiver can operate as a RFID tag even without external power supply which has dual antenna structure for initiator and target. The area increment due to additional target antenna is negligible because the target antenna is constructed by using a shielding layer of initiator antenna. The analog front end circuit of the proposed NFC transceiver consists of a transmitter and receiver of reader/writer block supporting NFC initiator or RFID reader mode, and a tag circuit for target of passive NFC mode or RFID tag mode. The maximum baud rate of the proposed NFC device is 212kbps by using UART serial interface. The chip has been designed and fabricated using a Magnachip's $0.35{\mu}m$ double poly 4-metal CMOS process, and the effective area of the chip is 2200um by 3600um.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.93-98
• /
• 2018

This paper introduces the development of HF(NFC) and UHF band(13.56 MHz, 920 MHz) tag antennas, imbedded in a box. In dual band antennas, the HF band tag can be used to inspect the box using NFC, and the UHF band tag can be used for logistics. The dielectric constant of the box material is measured and used for simulation. The Ntag213 chip manufactured by NXP is used in HF loop antennas, since NFC is possible with Ntag213. For the UHF band, the Higgs-3 chip manufactured by Alien is used. The HF tag antenna is located at the center of the UHF tag antenna, and the location of the HF tag antenna is calculated while considering coupling effects. The designed tag can be used by both the bands for the purposes of logistics and authentication.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1675-1683
• /
• 2018

This paper is a study on modeling of an NFC antenna to be inserted into a steel pallet for conveying selected good products through a vision system to a threaded screw from CNC equipment. The CNC equipment used here incorporates the information communication technology (ICT) corresponding to the Internet of Things (IoT), and the smart factory system technology that produces information by exchanging information freely in two directions by connecting the POP corresponding to the service Internet is evolved Equipment. Therefore, it is possible to collect position information on the threaded workpiece by applying NFC antenna designed considering iron pallet used for material management so as to grasp estimated completion time and actual production amount according to production instruction from existing analog type equipment to POP monitoring system And investigated its characteristics.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.303-308
• /
• 2014

In this paper, a ferrite sheet at the back of the smartphone by type, pattern, stars, the thickness of the recognition distance by attaching the NFC optimum ferrite sheet simulation was designed. Characterized by patterns rather than the Full-type I-type communication distance of about 1 ~ 2mm more extended. Ferrite sheet metal by applying the NFC antenna is effective in improving the characteristics were confirmed. In the case of the pattern C, the permeability is 140, a thickness of 0.1mm, Full-type ferrite sheet when applied to NFC communication distance than normal electromagnetic absorber is increased from 45 to 59 was confirmed that.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.5
• /
• pp.1471-1483
• /
• 2023

One of the fastest-growing mobile services accessible today is mobile payments. For the safety of this service, the Near Field Communication (NFC) technology is used. However, NFC standard protocol has prioritized transmission rate over authentication feature due to the proximity of communicated devices. Unfortunately, an adversary can exploit this vulnerability with an antenna that can eavesdrop or alter the exchanged messages between NFC-enabled devices. Many researchers have proposed authentication methods for NFC connections to mitigate this challenge. However, the security and privacy of payment transactions remain insufficient. We offer a privacy-preserving, anonymity-based, safe, and efficient authentication protocol to protect users from tracking and replay attacks to guarantee secure transactions. To improve transaction security and, more importantly, to make our protocol lightweight while ensuring privacy, the proposed protocol employs a secure offline session key generation mechanism. Formal security verification is performed to assess the proposed protocol's security strength. When comparing the performance of current protocols, the suggested protocol outperforms the others.

• Journal of Platform Technology
• /
• v.6 no.4
• /
• pp.59-68
• /
• 2018

The objective of this study is to develop an embedded antenna structure with NFC and WPC composite functions. By selecting stable materials, the optimal component ratio of the polymer sheet was determined. The low cost embedded winding method compared to the existing FPCB was devised. During the winding process, characterization and process technology were developed. We also fabricated a ferrite mold to process the WPC grooves and developed the process technology for optimizing the WPC antenna. The following conclusions were obtained. (1) Optimum composition ratio was derived as Fe 87.5%, Si 7%, Al 5.5% and selected as the final material. (2) Optimal sheet conditions were derived from the experimental evaluation method and the experimental design method through the combination test of the optimized sheet and the conventional mass production FPCB. (3) According to coil diameter and inner diameter, Q value fluctuation, resistance value and efficiency fluctuation are obtained. Therefore, the most suitable coil condition is selected and Rx matching is performed. (4) The EMV load modulation test and the cognitive distance test of the polymer sheet and the ferrite sheet showed that the recognition distance of the polymer sheet at 1k and 4K was 32-33 mm and the recognition distance of the ferrite sheet at the same condition was 30-31 mm.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.73-80
• /
• 2020

The 3D printing of electronics has been a major application topics in additive manufacturing technology for a decade. In this paper, wireless power transfer (WPT) technology for 3D electronics is studied to supply electric power to its inner circuit. The principle of WPT is that electric power is induced at the recipient antenna coil under an alternating magnetic field. Importantly, the efficiency of WPT does rely on the design of the antenna coil shape. In 3D printed electronics, a flat antenna that can be placed on the printed plane within a layer of a 3D printed part is used, but provided a different antenna response compared to that of a conventional PCB antenna for NFC. This paper investigates the WPT response characteristics of a WPT antenna for 3D printed electronics associated with changes in its design elements. The effects of changing the antenna curvature and the gap between the wires were analyzed through experimental tests.