• Proceedings of the Korean Society For Composite Materials Conference
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.49-52
• /
• 2001

The investigation of cure kinetics, morphology, and fracture toughness studies on epoxy resin/amine terminated PEI/Anhydride system were performed by differential scanning calorimetry and scanning electron microscopy. Modified autocatalystic kinetics model was applied by isothermal scan test. The fracture toughness for the neat epoxy resin was 2.15 MPa m0.5 and the fracture toughness was improved 45% as neat epoxy resin system. The generation of secondary phase of AT-PEI was observed and its size was grown up by increasing contents of PEI.

• Elastomers and Composites
• /
• 제50권1호
• /
• pp.13-17
• /
• 2015

A study of the effects of MWCNT as a nucleating agent on the formation reactions of the rigid polyurethane foams (RPUFs) was carried out. Sample PUFs, formulated with grease-type master batch of MWCNT/surfactant, were fabricated by free-rising method. Temperature changes with time during foaming process were measured using a digital thermometer. RPUF foaming process was observed to undergo 2-step processes with temperature inflection around 60 sec after the start of reaction, and then reached slowly the max. temperature. While the max. temperature of neat PUF was measured as ca. $120^{\circ}C$, that of the samples with MWCNT were as higher value as ca. $130^{\circ}C$, and, even the time to reach that temperature was reduced by about 15 sec. Average cell size of PUF samples decreased from 185.1 for the neat PUF to $162.9{\mu}m$ for the sample of 0.01 phr of MWCNT. As the result, it was considered that MWCNT in RPUF foaming process could play a roll both as a nucleating agent and as a catalyst.

• Journal of Power System Engineering
• /
• 제19권3호
• /
• pp.29-35
• /
• 2015

Environmental pollution is produced by consumption of fossil fuel, therefore alternative fuels is interested for development of new energy resources and reduction of exhaust emissions for air pollution prevention. Biofuels are produced from new vegetable oil and animal fat, may be used as fuel without change of engine structure in diesel engine. In this paper, the test results on specific fuel consumption, combustion characteristics of neat diesel oil and biodiesel blends(10 vol.% biodiesel and 20 vol.% biodiesel) were presented using four stroke, direct injection diesel engine, especially this biodiesel was produced from biodiesel fuel at our laboratory by ourselves. This study showed that specific fuel consumption is increased slightly, on the other hand cylinder pressure, rate of pressure rise, rate of heat release and soot were decreased slightly in the case of biodiesel blends than neat diesel oil.

• The Bulletin of The Korean Astronomical Society
• /
• 제35권1호
• /
• pp.91.2-91.2
• /
• 2010

We present far-ultraviolet (FUV) observations of comet C/2001 Q4 (NEAT) obtained with Far-ultraviolet Imaging Spectrograph (FIMS, also called SPEAR) around perihelion between 8 and 15 May 2004. Several important emission lines, including S I (1425, 1474 ${\AA}$), C I (1561, 1657 ${\AA}$), CO (1087.9, 1340-1680 ${\AA}$) were detected. Especially, the spectral features of CO are its electronic transitions belongings to the A-X, C-X systems. We also obtained radial profile of S I, C I, H I $Ly{\beta}$ with line fitting from central coma. The production rate of several spectral lines calculated from observed FUV photon flux. FUV spectral images of S I, C I, H I $Ly{\beta}$ emission lines were obtained.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제65권6호
• /
• pp.1026-1031
• /
• 2016

Neat Epoxy, nano alumina composites, micro alumina composites and multi-nano alumina composites were prepared and experiment were performed to measure their partial discharge resistant characteristics. The partial discharge resistance obtained for the microcomposites, nanocomposites and multi-nanocomposites are compared with those of unfilled epoxy and with GDE amount for surface modifier. It was observed that compare multi-nano alumina composites to micro alumina composites, the partial discharge resistance to degradation gets improved considerably. The improvement in the degradation resistance is attributed to the interface intension between the nano alumina composites and GDE, micro alumina and epoxy neat.

• Journal of the Korean Graphic Arts Communication Society
• /
• 제24권1호
• /
• pp.1-12
• /
• 2006

The rheological characteristics of an ink relate to its performance on the press and to the printing quality such as ink stability, transfer characteristics, mottle, squash, misting, dot gain, and so on. For lithographic print, the emulsification of ink is an important factor to determine the product. And also the rheological characteristics of the emulsified ink should be investigated. Thus, in this study, the effects of the changing molecular weight of rosin modified phenolic resin on the water-pickup ratio of neat inks were studied. And then rheological properties of neat inks and emulsified inks with changing molecular weight of rosin modified phenolic resin were analyzed by using rotational rheometer.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3640-3644
• /
• 2012

An efficient synthetic method for direct Henry reaction catalyzed by a biguanide; namely metformin, as an organosuper-base, between a variety of aromatic and aliphatic aldehydes and nitromethane under neat conditions has been developed. Convenient procedure for removal of the catalyst, chemoselective acquiring of ${\beta}$-nitroalcohols as predominant products, as far as possible short reaction time with excellent conversions are advantages of the developed protocol.

• Carbon letters
• /
• 제5권1호
• /
• pp.23-26
• /
• 2004

A study of partial carbonisation of green pitch fibres to temperatures in the range of 500-$1000^{\circ}C$ was carried out on three precursors - a neat pitch and two polymer modified pitches, with a view to find out a suitable temperature at which the fibres acquire considerably improved toughness or handleability (compared to that in the green stage) for their subsequent processing into carbon fibres. A partial carbonisation temperature of 500-$600^{\circ}C$ has been identified to result in a remarkable improvement in the toughness/handleability of the fibres in all the three cases. However, from techno-economical considerations, the neat pitch appears to provide the best precursor system for the production of pitch based carbon fibres.

• Bulletin of the Korean Chemical Society
• /
• 제6권6호
• /
• pp.354-358
• /
• 1985

Carbon-13 nuclear spin-lattice relaxation times have been measured over the range of temperature from 213K to 353K for carbons in n-heptane in neat liquid. The experimental data have been analyzed to obtain informations of segmental motions in the chain polymers by employing a model which describes jumps between several discrete states with different lifetimes. The overall reorientation of the molecule is assumed to be isotropic rotational diffusion. From the above analysis the activation energies of each C-C bond reorientation as well as the overall reorientation have been obtained through the Arrhenius-type temperature dependence.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1616-1618
• /
• 2009