• Journal of the Korea Institute of Building Construction
• /
• v.16 no.1
• /
• pp.45-52
• /
• 2016

In this research, characteristic properties of gel time and homo gel strength of liquid chemical grouting material for soil grouting using non-cement binder(NCB) were measured according to kinds of liquid B's Binders, W/B of liquid B's Binders and the volume ratio between liquid A and liquid B in order to examine on the applicability of soil grouting material using non-cement binder. The test was performed using NCB-1, NCB-2, NCB-3 which are environment-friendly inorganic binders developed by means of collaboration by our research team and which are different from chemical composition ratio each other. In conclusion, it was found that NCB could be applied to liquid soil grouting material using non-cement binder and replace ordinary portland cement, because NCB had the most excellent performance in certain section of gel time and homo gel strength in condition of this experiment.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.1
• /
• pp.38-44
• /
• 2009

We proposed the new nano-carbon ball (NCB) materials for eliminating the total volatile organic compounds(TVOCs) from the felt which is built in the car. The concentrations of acetaldehyde and formaldehyde of the original felts were varied upon the different production lots. Acetaldehyde in the felt can be eliminated to target level($0.2{\mu}g$) after introducing 0.5 wt% of NCB into the felt. Detector tube method for analyzing formaldehyde gas was more accurate than HPLC method. Formaldehyde can be eliminated to target level (64 ppb) after introducing 0.5 wt% of NCB into the felt. We also found that TVOC can be reduced to target level ($0.32{\mu}g$) after introducing 2.0 wt% of NCB. Upon introducing small amounts of NCB into the felt, it was possible that the level of formaldehyde, acetaldehyde and TVOC formed from the felts can be reduced to the target level. We also suggest the effective analyzing method of TVOCs.

• Carbon letters
• /
• v.9 no.4
• /
• pp.289-293
• /
• 2008

Naphtha Cracking Bottom (NCB) oil was heat reformed at various reforming temperature and time, and the volatile extracts were characterized including yields, molecular weight distributions, and representative compounds. The yield of extract increased as the increase of reforming temperature ($360{\sim}420^{\circ}C)$ and time (1~4 hr). Molecular weight of the as-received NCB oil was under 200, and those of extracts were distributed in the range of 100-250, and far smaller than those of precursor pitches of 380-550. Naphtalene-based compounds were more than 70% in the as-received NCB oil, and most of them were isomers of compounds bonding functional groups, such as methyl ($CH_{3^-}$) and ethyl ($C_2H_{5^-}$). When the as-received NCB oil was reformed at $360^{\circ}C$ for 1 hr, the most prominent compound was 1,2-Butadien, 3-phenyl- (24.57%), while naphthalene became main component again as increasing the reforming temperature.

• Journal of Life Science
• /
• v.9 no.2
• /
• pp.82-85
• /
• 1999

The effects of ethanol on 5-hydrosytryptamine(5-HT3) receptor-mediated ion current were evaluated in whole-cell patch-clamp recordings from NCB-20 neuroblastoma cells. The physiologic and pharmacologic properties of 5-HT-activated ion current in NCB-20 cells indicated that it was mediated by 5-HT3 receptors. Ethanol(25-100mM) potentiated 5-HT3 receptor-mediated current in a concentration-dependent manner.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.8
• /
• pp.1111-1117
• /
• 2009

Effect of Rubus coreanum Miquel and Opuntia ficus-indica var. saboten in combination with chicken breast and wheat gluten on functional properties and physicochemical characteristics during processing of cooked noodles were investigated. These studies were carried out to investigate functional properties of Rubus coreanum Miquel and Opuntia ficus-indica var. saboten by the antioxidant ability. Antioxidant activities were evaluated by electron donating, xanthine oxidase inhibition rate and contents of total polyphenols. Overall, the antioxidant activities of hot water extracts were a little higher than those of ethanol extracts. Also, the antioxidant abilities at the concentration of 1,000 ppm in hot water extracts were higher than those of ethanol extracts by the determination of total polyphenol content and DPPH, which showed 150.25 mg% in extracts of Rubus coreanum Miquel and showed 69.36% in extracts of Opuntia ficus-indica var. saboten. The effects on processing characteristics of cooked noodles were investigated in combination with transglutaminase (TGase), plant extracts, wheat gluten and chicken breast. Cooking time was very short as 340 second in CB (cooked breast), compared to other treatments. In contrast, NCB (non cooked breast) took a longer time as 779 second. Also, CB was higher than NCB, which showed 146.3% in CB and 61.5% in NCB in water absorption ratio during cooking of noodles. Tubidity of soup was the lowest at 0.240 in NCBT (non cooked breast transglutaminase), which means the lowest loss of solid in noodle during cooking. In case of treatment of TGase, overall texture properties were higher than other samples in hardness, cohesivness, springness and gumminess. In sensory evaluations, cooked noodles treated with TGase showed a higher percentage of overall acceptability than other treatments.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.3
• /
• pp.233-242
• /
• 2005

The absolute dimensions and orbital elements of 66 near contact binaries, collected from literatures, have been analyzed to investigate the physical characteristics of the near contact binaries as well as co-relations among physical parameters. The relationship between the mass ratio and luminosity ratio of the near contact binary systems have been obtained as a $L_2/L_1{\approx}(M_2/M_1)^{1.45}$, which is similar to that of the early type contact binary system. The physical parameters of the new contact binaries show that the difference in mass, radius, luminosity and temperature between the primary and the secondary components for the F type NCBs are smaller than those for the A type NCBs. In H-R diagram, the components of the A types are located closer to the terminal age main sequence than those of the F types.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.24
• /
• pp.10665-10673
• /
• 2015

Background: We wished to analyse patterns of use of needle biopsy procedures by BreastScreen Australia (BSA) accredited programs to identify areas for improvement. Design: BSA services provided anonymous data regarding percutaneous needle biopsy of screen detected lesions assessed between 2005-2009. Results: 12 services, from 5 of 7 Australian states and territories provided data for 18212 lesions biopsied. Preoperative diagnosis rates were 96.84% for lesion other than microcalcification (LOTM) and 93.21% for microcalcifications. At surgery 97.9% impalpable lesions were removed at the first procedure. Of 11548 Microcalcification (LOTM) biopsied, 46.9% were malignant. The final diagnosis was reached by conventional core biopsy (CCB) in 72.46%, FNAB in 21.33%, VACB in 1.69% and open biopsy in 4.52% of lesions. FNA is being limited to LOTM with benign imaging After FNAB, core biopsy was required for 38% of LOTM. In LOTM the mean false positive rate (FPR) was 0.36% for FNAB, 0.06% for NCB and 0% for VACB. Diagnostic accuracy was 72.75% for FNAB and 92.1% for core biopsies combined. Of 6441 microcalcifications biopsied 2305 (35.8%) were malignant. Microcalcifications are being assessed primarily by NCB but 6.57% underwent FNAB, 45.6% of which required NCB. False positive diagnoses were rare. FNR was 5% for NCB and 1.53% for VACB. Diagnostic accuracy was 73.52% for FNAB, 86.29% for NCB and 88.63% for VACB. Only 8 of 12 services had access to VACB facilities. Conclusions: BSA services are selecting lesions effectively for biopsy and are achieving high preoperative diagnosis rates. Gaps in the present accreditation standards require further consideration.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.194-205
• /
• 2005

The network structure of Ni-coated carbon black (NCB) composites filled with phenolic resin was investigated by means of using scanning electron microscopy, viscosity, interfacial tension, shrinkability, Flory-Huggins interaction parameters, and swelling index. The electrical properties of the composites have been characterized by measurement of the specific conductivity as a function of temperature. Additionally, the variation of conductivity with temperature for the composites has been reported and analyzed in terms of the dilution volume fraction, relative volume expansion, and barrier heights energy. The thermal stability of phenolic-NCB composites has been also studied by means of the voltage cycle processes. The experimental data of EMI wave shielding were analyzed and compared with theoretical calculations. The mechanical properties such as tensile strength, tensile modulus, hardness and elongation at break (EB) of NCB-phenolic resin composites were also investigated.

• Cement
• /
• s.114
• /
• pp.48-53
• /
• 1989

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.55-61
• /
• 2013

The important issue in header compression would be how to compress the dynamic field increasing constantly between consecutive packets in the head of IP wireless networks. Existent header compression scheme that can eliminated repeated field in header are RFC2507, RFC3095 and E-ROHC scheme. In this paper, I propose a new method of compressing TS fields, which are the Dynamic fields of the RTP packet, into BCB (Basic Compression Bits) basic bits or NCB (Negotiation Compression Bits, BCB + additional bits) bits. In order to verify the proposed header compression method, I have simulation about proposed video packets of IP wireless networks. using Visual SLAM.