• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.71-78
• /
• 2001

In ship building industry, CNC and CAM are mostly applied to NC cutting and manufacturing of propeller and prototype ship model. Herein, prototype ship model is producted by CAD/CAM process. Hull form data is obtained from the ship drawing and used for 3D modeling by CAD software Pro/Engineer. CAD data is transferred into CAM s/w SPEEDplus to perform CNC process and the prototype small ship model is manufactured by CNC machine. To solve data transfer among different systems. IGES and STEP neutral formats are currently used. Herein IGES format is adopted for data transfer between CAD/CAM softwares.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.2
• /
• pp.145-152
• /
• 2000

Some evolutional system has been used to promote the efficiency of the DNC(Direct Numerical Control) Controller. However, these are many inconvenience to this operator because it lacks harmony in interaction between the computer and the NC(Numerical Control) Controller. Also, there are some controversial points when data error occurs at the Data Input/Output. Accordingly, this paper explores a new Data Remote Control System. In this study, the NC Controller of the DNC network has to get full data by removing data error in this system. In this system, the main merits are easy manufacturing and the convenience of Data Input/Output. That is, remote control of the NC machine tool is possible without mutual interaction between the computer and itself.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.207-212
• /
• 1997

The purpose of this study is the development of CAM system which can cut and measure any shape by machining center and coordinate measuring machine. The overall goal of the CAM system is to achieve the CNC machining, from digitizing through to final cutting. The hardware of the system comprises PC and machining center, CMM. There are three steps in the CNC machining, (1) workpiece measuring on the CMM, (2) geometric modeling by the CAD system, (3) NC commands generation by the tool path compensated for tool nose radius. It is developed a software package, with which can conduct a micro CAM system in the PC without economical burden.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.16-22
• /
• 2005

It is difficult to separate those of NC controller from the error of machine tools because the conventional testing methods to inspect the performance are including the errors of moving system, therefore it has been used as the methods that compare the other controllers. Also, it is hard to predict the machine itself errors with the methods assembling the NC controller and moving system on machine because of the variable load conditions. In this study, the performance inspecting system was developed by analyse the $axis\_rotating$ properties of servo system finally outputting from NC controller. The axis torque was controlled by motor dynamometer and the rotating position accuracy was measured by this developed system.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.216-221
• /
• 2000

In this study, two mathematical models are first constructed to analyze vibration characteristics of a gear train - spindle system of an NC lathe gear box. One is a lumped parameter model which is used for calculating natural frequencies of the torsional vibration, the other is a finite element model for analyzing lateral vibration and critical speeds of the spindle system. In addition, this study examines some possible resonance conditions such as gear mesh frequencies, 1X shaft rpm frequencies over whole operating speed range, and so on. The results may be helpful to design a machine tool gear box with low noise and vibration.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.216-222
• /
• 1992

현재의 가공 시스템에 있어서 가공 작업자체는 NC 공작기계, 머시닝 센터등에의해 자동적으로이루어 지고있으나, 작업 상태에 대한 감시 및 공구교환 시기의 결정은 주로 숙련된 작업자에 의해이루어 지고 있으므로완전 자동화, 무 인화에 큰장애가 되고 있다. 특히 공구 파손 및 공구 마멸에 대한 감시는 공구 교환 시점의 자동결정 뿐 아니라 가공 시스템의 무인 운전을 위해서 필수적인 것으로, 기계 정지 시간(down time)을 줄일 수 있고, 제품의 정밀도를 높일 수 있다. 본 연구에서는 이를 위한 기초 연구로, 가공상태를 나타내는 감시신호로 AC 주축 모터 전류와 주축대진동 신호 를 선정하여 엔드밀 공구와 드릴 공구를 이용한 작업에서의 공구 상태변화에 따른 감시신호의 성능을 조사하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.806-811
• /
• 1994

최근의 절삭가공 생산시스템은 무인자동화,고속화,정밀화로 대별되면서 생산성을 극대화시킬려는 방향으로 연구 가 진행되고 있다. 종래의 CNC화된 기계가공시스템에서는 절삭속도,이송속도 그리고 절삭깊이 등과 같은 절삭 조건은 On-line으로 조절되는 장치를 갖지 않고 Off-line으로 프로그래머의 경험이나 절삭가공의 데이터 핸드북을 통하여 결정되어진다. 이러한 절삭조건은 절삭률 즉 생산성의 측면에서 최적의 값이 될 수가 없다. 이는 프로그래머가 측면에서 최적의 값이 될 수가 없다. 이는 프로그래머가 공구의 마모나 표면거칠기, 또는 공작기계의 부하 등을 고려하여 극적으로 NC프로그램을 짜기 때문이다. 이러한 문제점 때문에 현재 개발되어지고 있는 대부분의 적응제어시스템은 실용화가 되지못하고 있는 실정이어서 효휼적인 적응시스템의 개발은 필수적이다. 따라서 본 연구에서는 무인자동화 가공시스템에서 생산성을 최대화하기 위하여 사용하는 ACO 시스템에서 발생하는 상기의 문제를 해결하여 실용화할 수 있는 가공 최적화 시스템을 개발함을 연구의 목적으로 하고 있다.

• IE interfaces
• /
• v.7 no.3
• /
• pp.113-123
• /
• 1994

사용자 고유의 공정설계 노하우는 설계 도면정보에서 가공정보로의 변환의 일관성 유지를 어렵게 하고 또한 그 기술획득에 많은 시간을 필요로 한다. 가공방법과 가공기계가 결정된 후, 세부 작업내용, 작업순서, 절삭공구, 절삭조건, 공수 등을 결정하는 밀링 작업계획 모듈을 공작기계 부품을 대상으로 개발하였다. 설계 도면정보를 특징형상에 따라 입력하여 최적절삭조건 모듈 및 I/MILL 상용 프로그램의 도움을 받아 작업지시서와 NC 프로그램을 출력한다. 특징형상을 중심으로 작업계획 생산정보의 입／출력 내용과 작업계획 항목을 결정하는 본 시스템 개발을 통해 생산정보 통합 기술에 대한 이해를 기대한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.112-122
• /
• 1996

In order to monitior machine tool condition and diagnose alarm states due to electrical and mechanical faults, and expert system using diagnostic parameters of NC machine tools was developed. A model-based knowledge base was constructed via searching and comparing procedures of diagnostic parameters and state parameters of the machine tool. Diagnostic monitoring results generate through a successive type inference engine were graphically displayed on the screen of the console. The validity and reliability of the expert system was rcrified on a vertical machining center equipped with FANUC OMC through a series of experiments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.395-400
• /
• 1999

At present, some evolutional system has been used to promote the efficiency of the DNC(Direct Numerical Control) Controller. However, these are many inconvenience to this operator because it lacks harmony in interaction between the computer and the NC(Numerical Control). Also, there are some controversial poults when data error occurs at the Data Input/output. According1y, this thesis explores a new Data Remote Control System. In this study, the NC Controller of the DNC network has to Bet full data by removing data error in this system. In this system, the main merits are easy manufacturing and the convenience of Data Input/output. That is, remote control of the NC machine tool is possible without mutual interaction between the computer and itself.