• Journal of the Korean Wood Science and Technology
• /
• v.39 no.3
• /
• pp.238-243
• /
• 2011

This study was estimated the change of color of compressed wood by compression temperature and time. Wood color was measured using a colorimeter and evaluated by the NBS (National Bureau of Standards) unit. As a result, the whiteness decreased with increasing compression temperature. In contrast, redness and yellowness was increased with increasing compression temperature. All of the color difference showed the 'Very Much' by NBS unit. The whiteness decreased with increasing compression time. The redness and yellowness were insignificant effect on compression temperature. In other words, the effect of compression temperature was much greater than compression time in the change of wood color.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.2 no.3
• /
• pp.243-255
• /
• 1990

The objective of this study is to present an efficient measurement method of the effective thermal diffusivity for the fibrous insulation material. The non-linear parameter estimation (NPE) method is adapted for this analysis because of its accuracy and its results are compared with those by other direct methods such as CTP, CHP and STD method. A experimental system is constructed with bell-jar vaccum chamber, diffusion pump, tube type furnace, control unit and data acquisition system included with A/D converter and IBM XT/AT personal computer. The typical results obtained from this study are as follows; 1) NPE method can be recommended as an useful and accurate method to measure the effective thermal diffusivity of insuation material because it is shown that the measurement error compared with those by other direct methods is reduced for standard material, NBS-1450b. 2) NPE method can minimize the effects of ill-measured temperature due to external disturbance, because the final value is found by point to point estimating. 3) NPE method dose not depend on the kinds of heat flux, since the surfac temperature are used to estimate the thermal diffusivity. 4) With NPE method, compared with the steady state method, a measuring time and a sample size could be reduced.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.9
• /
• pp.1-9
• /
• 2021

This study aimed to investigate the existence of the Feldstein-Horioka (1980) puzzle in international macroeconomics by applying the conditional Autoregressive Distributed Lag (ARDL) model to examine the long-run relationship between national savings and investments in Thailand and China. The input of this study relied on annual national savings and investments as a fraction of GDP during 1980-2019 which was collected from China National Bureau of Statistics (NBS) and Thailand National Economic and Social Development Council (NESDC). Hypothetically, Augmented Dickey-Fuller (ADF) and Phillips-Perron (PP) unit root tests were applied to test the stationary properties and to investigate the integration level of selected time series. The empirical results, confirmed by cumulative sum (CUSUM) and cumulative sum square (CUSUMSQ), maintained no serial correlation and structural break problems. The finding of this study suggested that the Feldstein-Horioka puzzle in Thailand did not exist significantly. Thailand's national savings and investments nexus was independent, following the classic economic idea that financial liberalization, or perfect capital mobility, allowed national savings and investments to flow freely to countries with better interest rates. Whereas, a strong significant correlation was found in the case of China during the fixed exchange rate regime switching in 1994 and post WTO participation after 2001-2019.

• Journal of Technologic Dentistry
• /
• v.31 no.1
• /
• pp.23-36
• /
• 2009

The goal of esthetic restoration is to achieve morphologic, optical, and biologic acceptance. Creation of a natural looking ceramic restoration, which blends harmoniously with surrounding dentition, is not always achieved. A successful color match is an important aspect of any esthetic dental restoration. Since natural enamel has inherent translucency, it is important that ceramic restorations reproduce the translucency and color of the natural teeth. However, the final color match of porcelain crowns to adjacent natural dentition remains some problem. Difficulties related to color matching arise from the structural differences that exist between metal ceramic crowns and natural teeth, the limited range of available ceramic shades, inadequate shade guides, different types of metal alloys, repeated firing, the condensation technique, and varying compositions of ceramic materials. Many factors contribute to the esthetic success of dental restoration: optical properties such as color and its elements of hue, value, and chroma; translucency and opacity; light transmission and scattering; and metamerism and fluorescence. The purpose of this study was to determine the color changes of metal-ceramic system with different veneering porcelain powder after repeated firing. The objectives of this in vitro study were to measure the lightness($L^*$), chromaticity($a^*$), chromaticity($b^*$), chroma($C^*$), hue(h), reflectance(%), color difference(${\Delta}E$). The following conclusions were obtained: 1. An increase in the number of firings resulted in decrease in lightness($L^*$) but increase in chromacticity($a^*$) with all porcelain. After the second sintering resulted in decrease in chromacticity($b^*$) with opaque-dentin porcelain and dentin porcelain but in increase with enamel porcelain and translucency porcelain. And after the second sintering resulted in decrease in chroma($C^*$) with opaque-dentin porcelain and dentin porcelain, but on the whole side in decrease with enamel porcelain and translucency porcelain. 2. After the second firing, a increase in the number of firings resulted in decrease reflectance(%) in all wavelength. 3. There were noticeable color differences(${\Delta}E$) between first sintering and multiple firings(dentin porcelain: 5.29~8.15, opaque-dentin porcelain: 4.83~8.2, enamel porcelain: 8.93~13.15, translucency porcelain: 9.37~12.91), but the color difference(${\Delta}E$) after second sintering were down to 4.87 in all porcelain. 4. Given the NBS Criteria, a 'trace' was not found this study but a 'slight' was found 2-3, 3-5 in dentin porcelain, 2-3 in opaque-dentin porcelain, 3-5, 5-10 in enamel porcelain and translucency porcelain, a 'noticeable' was 2-5, 3-10, 5-10 in dentin porcelain and opaque-dentin porcelain, 2-3, 2-5, 3-10 in enamel porcelain 2-3, 3-10 in translucency porcelain, an 'appreciable' was 1-2, 1-3, 2-10 in dentin porcelain 1-2, 1-3, 2-10, 3-10 in opaque-dentin porcelain, 2-10 in enamel porcelain, 2-5, 2-10 in translucency porcelain, a 'much' was 1-5, 1-10 in dentin porcelain and opaque-dentin porcelain, 1-2, 1-3, 1-5 in enamel porcelain 1-2, 1-3, 1-5, 1-10 in translucency porcelain, a 'very much' was 1-10 in enamel porcelain.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.5
• /
• pp.651-658
• /
• 2022

To cope with climate change, studies are being conducted on natural-based solutions (NBS) that reduce carbon by utilizing ecosystems and ecological resources ultimately to achieve carbon neutrality. In this study, carbon storage and economic value evaluations were conducted of the coastal land and sea of Busan using InVEST's Carbon and Coastal Blue Carbon models, which are ecosystem service-based evaluation models. As a result, it is estimated that the amount of carbon storage per unit area is lower than that of the entire Busan land area and that if the currently underway or planned development works are completed, the carbon storage of the coastal land areas would be decreased more. Coastal sea areas have less carbon storage than coastal land, but there is great potential for NBS that utilize ecological resources in the future. If the reclamation of public water affects important habitats with high carbon storage levels, it will reduce these levels, and such negative effects could last for a long time. For the sustainable management of Busan coastal areas, ecosystem service-based management strategies are needed considering carbon storage.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.2
• /
• pp.20-27
• /
• 1998

This paper describes color clustering method based on color difference in the uniform Munsell color space obtained from hue, saturation, and value. The proposed method operates in the uniform HSV color space which is approximated using ${L^*}{a^*}{b^*}$ coordinate system based on the RGB inputs. A clustering and color difference evaluation are proposed by thresholding NBS unit which is likely to Balinkin color difference equation. Region segmentation and isolation process are carried out ISO DATA algorithm which is a self iterative clustering technique. Through the clustering of 2 input images according to the threshold value, satisfactory results are obtained. So, in conclusion, it is possible to extract result of better region segmentation using human color perception of the objects.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.555-561
• /
• 1994

The program of performing a fast and automatic analysis of gamma ray spectra obtained by a Multi-Channel Analyzer (MCA) is developed for the surveillance of the nuclear fuel integrity. The integrity of the nuclear fuel is confirmed by the measurement of the radiation level of the reactor coolant through the real time monitoring and the periodic sampling analysis. In Yonggwang nuclear power plane 3 and 4, the Process Radiation Monitoring System (PRMS), which is a real time monitoring system, provides a measure of the fuel integrity. Currently, its spectrometer channel can identify only one radionuclide at a time since the signal processing unit of the spectrometer channel is a Single Channel Analyzer (SCA). To improve the PRMS, it is necessary to substitute the MCA for the SCA The program is operated in a real time mode and an on-demand mode, and automatically performed for all procedures. The test results by using the National Bureau of Standards (NBS) mixed standard source are in good agreement with those from Canberra System 100 which is a commercial MCA Consequently, the developed program seems to be employed for automatic monitoring of gamma rays in nuclear power plants.

• Journal of dental hygiene science
• /
• v.10 no.2
• /
• pp.95-100
• /
• 2010

The purposes of this study were to examine the effect of different fluoridated bleaching solution on the changes in physical and chemical characteristics of tooth. Forty-eight bovine incisors were divided into four groups to receive bleaching treatments, over a 14days period, as follows: no treatment; 10% carbamide peroxide (CP) bleaching; 10% CP containing 0.05% fluoride; and 10% CP containing 0.1% fluoride. All the specimens were highly polished and discolored with commercial COCK.Color and enamel changes were determined with colorimeter, microhardness tester, scanning electron microscope, atomic force microscopy. All the collected data were analyzed with one-way ANOVA. After the bleaching, bleached groups showed the color change(E*). Microhardness of 10% CP group decreased after tooth bleaching. But microhardness of containing fluoride bleached groups increased after tooth bleaching. Enamel surface of 10% CP bleached group showed any apparent morphology and roughness changes compared to the enamel which was stored in distilled water only. These results demonstrated that Fluoridated 10% Carbamide Peroxide have appreciable bleaching effect on bovine teeth and were not adversely affects enamel. Supporting influence of fluoride-containing bleaching solution on remineralization could be observed and further research must be carried out in various active environments to confirm these results clinically.

• Journal of dental hygiene science
• /
• v.8 no.4
• /
• pp.255-260
• /
• 2008

The purposes of this study were to examine the effect of 35% hydrogen peroxide (HP) bleaching agent on the changes in physical and chemical characteristics of tooth. The bleached teeth showed an apparent color changes. The whiteness increased linearly within the tested period as the period of bleaching increased. The microhardness between bleached groups after bleaching showed any statistically significant difference according to the paried t-test. The bleached enamel surface showed any apparent morphological changes compared to the enamel which was stored in distilled water only. The difference of the total mineral contents for the distilled water and hydrogen peroxide did not show statistical significance. These results demonstrated that bleaching using 35% hydrogen peroxide were adversely affects application time of experimental group and may confirm the safety of using these agents for a short time in dentist-monitored bleaching.