• Journal of Korean Society of Forest Science
• /
• v.79 no.3
• /
• pp.302-308
• /
• 1990

This study was conducted to determine the effects of mycorrhizal inoculation and ortet ages on the rooting of Quercus acutissima cuttings. The cuttings taken from 12-week-, 2-year-, 4-year-, and 20-year-old plants were rooted in mid summer in the rooting medium (vermiculite 2 : peatmoss 1 by volume) with or without Pisolithus tinctorius (Pt) and Glomus sp. inocula and IBA under intermittent misting system in an open shed. The average percentages of rooting were about 82%, 49%, 29%, and 13% for cuttings taken from 12-week-, 2-year-. 4-year-, and 20-year-old seedlings, respectively. Pt inoculation, enhanced rooting of cuttings at all age classes, except 12-week-old seedlings, with the highest enhancement(22%) observed in cuttings taken from 20-year-old trees. The highest percentage of rooting in each age group eras 88.9% in 12-week-old seedlings treated with Pt plus 3.000ppm IBA, 75% in 2-Year-old plants with 1,000ppm IBA, 58.3% in 4-year-old plants with 3.000ppm IBA and 22% in 20-year-old plants. The addition of Glomus sp. fungus inoculum failed to enhance rooting. Pt mycorrhizal inoculation enhanced root dry weight, length, and diamter of adventitious roots at cuttings taken from 12-week- and 20-year-old trees, except the cuttings taken from 4-year-old seedlings. Rooted cuttings had more total nitrogen content in the leaves than unrooted cuttings, and the greater rooting response was associated with the higher phosphorus content in the leaves.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.168-171
• /
• 2003

Bismuth layered structure, Cerium-substituted $Bi_4Ti_3O_{12}$ ($(Bi,Ce)_4Ti_3O_{12}$) thin films were prepared on the $Pt/TiO_2/SiO_2/Si$ substrates by the pulsed laser deposition method. We investigated the Ce-subsitituted effect on the grain orientation and ferroelectric properties. $Ce^{3+}$ ion substitution for $Bi^{3+}$ ion in perovskite layers of BTO decreased the deeree of c-axis orientation and increased the remanent polariation (2Pr). The structure and morphology of the films were characterized using X-ray diffraction and atomic force microscopy. The $(Bi,Ce)_4Ti_3O_{12}$ (BCT) thin films, which were annealed $700^{\circ}C\;and\;800^{\circ}C$ for 10min and 30min, showed a perovskite phase and dense microstructure. As the thickness of the BCT film was decresed that the ferroelectric properties of the BCT thin films were good.

• Journal of Sensor Science and Technology
• /
• v.7 no.3
• /
• pp.154-162
• /
• 1998

A planar Bi-Sb multijunction thermal converter with high thermal sensitivity and small ac-dc transfer error has been fabricated by preparing the bifilar thin film Pt-heater and the hot junctions of thin film Bi-Sb thermopile on the $Si_{3}N_{4}/SiO_{2}/Si_{3}N_{4}$-diaphragm, which functions as a thermal isolation layer, and the cold junctions on the dielectric membrane supported with the Si-substrate, which acts as a heat sink, and its ac-dc transfer characteristics were investigated with the fast reversed dc method. The respective thermal sensitivities of the converter with single bifilar heater were about 10.1 mV/mW and 14.8 mV/mW in the air and vacuum, and those of the converter with dual bifilar heater were about 5.1 mV/mW and 7.6 mV/mW, and about 5.3 mV/mW and 7.8 mV/mW in the air and vacuum for the inputs of inside and outside heaters, indicating that the thermal sensitivities in the vacuum, where there is rarely thermal loss caused by gas, are higher than those in the air. The ac-dc voltage and current transfer difference ranges of the converter with single bifilar heater were about ${\pm}1.80\;ppm$ and ${\pm}0.58\;ppm$, and those of the converter with dual bifilar heater were about ${\pm}0.63\;ppm$ and ${\pm}0.25\;ppm$, and about ${\pm}0.53\;ppm$ and ${\pm}0.27\;ppm$, respectively, for the inputs of inside and outside heaters, in the frequency range below 10 kHz and in the air.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.6
• /
• pp.507-511
• /
• 2004

This research was carried out to offer the basic informations about new varietal breeding for specific use and physiological characteristics through investigation of detection, content variation and color difference of anthocyanin individual pigments within seed coats in domestic black soybean. The seed of thirteen cultivars such as Geomjeongkong 1, Geomjeongkong 2, Seonheugkong, Tawonkong, Ilpumgeomjeongkong, Geomjeongolkong, Cheongjakong, Jinju 1, Heugcheongkong, Juinunikong-Y, Juinunikong-G, Geomjeongkong 3, Geomjeongkong 4 was tested. C3G (cyanidin-3-glucoside) was detected in only Geomjeongkong 1 and Seonheugkong but D3G (delphinidin-3-glucoside) and C3G were found in Heugcheongkong. The rest cultivars that there were three anthocyanins such as D3G, C3G, and Pt3G (petunidin-3-glucoside). Anthocyanin content of tested cultivars showed a high variation. The ranges of D3G, C3G, Pt3G, and TA (total anthocyanin) contents were $0.55\~2.63mg/g,\;2.77\~8.38mg/g,\;0.38\~5.65mg/g,\;and\;3.32\~16.92mg/g$, respectively. These contents showed variation among cultivars as well as variation between two years, 2001-2002. As a result of variation of anthocyanin color difference, the ranges of L (lightness), a (redness), and b (yellowness) as Hunter's value were $34.09\~42.89,\;12.77\!22.85,\;and\;5.36\~12.10$, respectively, and these color differences showed variation among cultivars and also variation between two years, 2001-2002. D3G, C3G, Pt3G, and TA showed reciprocally a positive correlation being representive of high significance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.168-174
• /
• 2006

In this paper, we propose an architecture for communication between the IPv4-based UA and the IPv6-based UA in IMS based Mobile Networks, and design and implement the IMS protocol Translator for verification of the architecture. For the design of the internetworking between the IPv4 and the IPv6, we analyze the transition mechanisms and investigate the protocol translator. The IMS protocol translator is composed of the IMS-ALG(IP Multimedia Subsystem - Application Level Gateway) and TrGW(Translation Gateway), and the conformance of these components are verified by experiments.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.282-284
• /
• 1997

Ultrasonic motors using piezoelectric ceramics and brass metal endcaps were fabricated, which is operated by single - phase high frequency. The structure of the ultrasonic motors has the wind-mill type. The stator part consists of a piezoelectric disk and two metal endcaps slotted wind-mill type. According to the piezoceramic disk vibrates as a radial mode, two metal endcaps provide both longitudinal and torsional displacements simultaneously. Because the metal endcaps have a nonsymmetric structure. the principle of the ultrasonic motor is not well understood. The dimension of the ultrasonic motor is diameter in 12.7 mm and thickness in 2.0 mm, and especially the PMN-PT-PZ piezoelectric disk was used. The maximum revolution speed 700 rpm and the maximum torque 0.22 mN.m were obtained. The ultrasonic motor for rotation was Supplied only single phase AC.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.6
• /
• pp.512-515
• /
• 2004

The purpose of this experiment was to obtain informations about variation of anthocyanin content within black-seeded soybean testa according to cultivation and harvest time. Three varieties, Ilpumgeomjeongkong, Geomjeongkong 2, Tawonkong were tested in this experiment. Seeds were planted on April 15 (early planting), May 15 (optimum planting), and June 15 (late planting), respectively. Harvest time was R6 (full seed), R7 (physiological maturity), and R8 (harvest maturity), respectively. The content of delphinidin-3-glucoside (D3G), cyanidin-3-glucoside (C3G), petunidin-3-glucoside (Pt3G), and total anthocyanin (TA) had all increased gradually from April 15 to June 15 as well as R6 to R8. There was no varietal difference in D3G, but C3G and TA of Geomjeongkong 2 were higher than other two varieties. Pt3G was the highest Tawonkong of varieties. The value of L as anthocyanin color difference had gradually decreased from April 15 to June 15 and R6 to R8, Geomjeongkong 2 among three varieties was the lowest. The value of a was the highest on May 15 and increased gradually from R6 to R8, Geomjeongkong 2 was the lowest. The value of b was the highest on June 15 as late planting and was the highest Geomjeongkong 2 of varieties. The value of b had increased gradually from R6 to R8. D3G, C3G, Pt3G, and TA contents showed mutually high positive correlation and these four characters were represented high negative correlation with L value but showed high positive correlation with a and b values. The value of L showed high negative correlation with a and b values. The value of a showed high positive correlation with b value.