• The Korean Journal of Mycology
• /
• v.20 no.4
• /
• pp.302-308
• /
• 1992

Seven genera and 15 species of fungi were isolated from 50 samples of then different steps of dried onion (5 samples of each step) collected from an onion factory in Sohag Governorate, Egypt, and grown on glucose-Czapek's agar (7 genera and 15 species) and 10% NaCl glucose-Czapek's (2 genera and 6 species). The average total counts of fungi were gradually decreased throughout the different steps of drying from 2090 to zero and 152 to zero colonies/g on glucose-Czapek's agar and 10% NaCl glucose-Czapek's agar media, respectively. Aspergillus was the most common genus on the two types of media used. The dominant species were Aspergillus niger, A. flavus, A. terreus, Penicillium chrysogenum and Fusarium of oxysporum on glucose-Czapek's agar and A. terreus and A. niger on 10% NaCl glucose-Czapek's agar. The chloroform extracts of different samples were tested for the presence of mycotoxins using thin layer chromatographic analysis. The results indicated that aflatoxin was present at concentrations decreased throughout the different steps of the drying from step No. 1, onion bulbs, $120\;{\mu}g/kg$; to step No. 8, standard A, $20\;{\mu}g/kg$ while step Nos. 9 & 10 (completely dry powdered onion) were free from aflatoxin. Citrinin was also present in the first three steps at concentrations gradually decreased from 30 to 10 mg/kg.

• Corrosion Science and Technology
• /
• v.15 no.4
• /
• pp.166-170
• /
• 2016

The combined process of porous type anodizing and desiccation treatment was applied to improve wettability of A1050 aluminum alloy. The water contact angles of anodized samples were increaseds considerably with desiccation treatment. However, there was no considerable effect of polishing and anodizing time on water contact angle. The corrosion behavior with the treatments was investigated electrochemically. The corrosion resistance of the samples in 3.5 mass% NaCl solutions increased with higher contact angle. Anodized and desiccated samples showed better corrosion resistance than un-desiccated samples around rest potential region.

• Journal of Microbiology and Biotechnology
• /
• v.6 no.5
• /
• pp.340-346
• /
• 1996

In order to find out if staphylococci occur in significant numbers in Korean fermented fish products, a total of 40 different fermented fish products were collected from different markets in Korea and analyzed for their physico-chemical and microbiological states. The pH, salt concentration and water activity of the products were measured and the total viable cell count and the number of Staphylococcus grown on mannitol salt agar were determined. The identification of the strains of Staphylococcus were made by API Staph Strip and MIS identification kits, and the physiological properties of the identified strains were further characterized by different conventional methods. The pH, salt content and water activity of fermented fish samples varied widely from 4.8 to 7.1, 7.4-28.7$%$ and 0.77-0.84, repectively, depending on the type of product. The total viable cell count varied from $10^4-10^9$ cfu/ml, and most of the samples had $10^5-10^6$ cfu/ml No correlation was found between the viable cell count and the pH, NaCl concentration and water activity of the samples. Among the 35 colonies identified as Staphylococcus strains by the identification kits, S. xylosus was the most frequently occurring strain marking 17, and S. warneri was 8, S. epidermidis 4 and S. cohnii 2. S. hominis, S. saprophyticus, S. haemolyticus and S. aureus were also identified once each. In some samples (K-3, P-6, K-8, G-5 and G-10), 2-3 different species of Staphylococcus were found. Considering the region of sampling, among the 10 samples from Kunsan 5 were identified as S. warneri, while in the other regions S. xylosus was predominant. Although the physiological characteristics of the identified strains were generally consistent with those in Bergey's Manual, some discrepances were also observed. All the strains were highly salt tolerant, growing in the media containing over 18$%$ NaCl. All the strains except S. aureus (G-11) showed negative in hemolysis activity, plasma coagulation and DNase tests. All the strains including S. aureus (G-11) showed negative in enterotoxin test.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.1
• /
• pp.8-16
• /
• 2004

Ground water samples were collected from residential, green" industrial, landfill and mining area and analyzed for 23 inorganics from March to October in 2002. The results are as follows; 1. The detection frequencies of inorganic materials such as As, Ba, B, Mo, Ca, Mg, Al, Cu, Fe, Mn, Zn, Na, K were 7.2∼77.1% which showed that these inorganics were detected in many ground waters. 2. The detection frequencies of 7 inorganics(Cd, Cr, Ph, Se, Sb, Be, Tl) were commonly low at ranging from 0.42 to 2.5%. These inorganics were contained in ground water partially. 3. Three inorganics such as Hg, Ni, Ag were not detected in any ground-water samples. 4. Compared to the other areas, ground water samples from landfill area contained greater concentration in many inorgainics and then showed higher levels in industral, residential, mining and green area in order. 5. Compared to noted concentrations of bottled water, inorganic minerals including Ca, Mg, Na, K related to taste were fluent in target samples. The results showed that the average concentrations of Mg, Na, K were 4.0 mg/l, 14.7 mg/l, 1.5 mg/l respectively. 6. The concentrations of inorganics such as Sb, Ba, Mo, Be, Tl, K in some ground water samples exceeded the water quality standards of WHO, the US and UK. Especially, Ba, Mo, K also showed relatively high detection frequencies so these inorganics need to be considered as analytes in Korea Drinking Water Regulation in further study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.104-111
• /
• 2015

This study shows the mechanical properties of alkali-activated slag cement (AASC) synthesized using sulfate with NaOH solution. The used sulfates were calcium sulfate ($CaSO_4$, denoted CS) and sodium sulfate ($Na_2SO_4$, denoted SS). The replacement ratio of sulfates was 2.5, 5.0, 7.5 and 10.0% by weight of slag. NaOH solution of 2M and 4M concentration was used. A sample was activated with sulfate and activated with blended activator (blending NaOH solution with sulfate) respectively. 24 mix ratios were used and the water-binder weight ratio for the test was set 0.5. This research carried out the compressive strength, flexural strength, ultrasonic pulse velocity (UPV), absorption and X-ray diffraction (XRD). In the case of samples with CS, sample with 7.5% CS, sample with 2M NaOH+5.0% CS and sample with 4M NaOH+5.0% CS showed the good performance in the strength development. In the case of samples with SS, sample with 10.0% SS, sample with 2M NaOH+7.5% SS and sample with 4M NaOH+2.5% SS obtained good performance in strength. The results of UPV and water absorption showed a similar tendency to the strength properties. The XRD analysis of samples indicated that the hydration products formed in samples were ettringite, CSH and silicate phases. In this study, it is indicated that when compared to the use of sulfate only, the use of both sulfate and NaOH solution makes mechanical properties of AASC better.

• Journal of Environmental Health Sciences
• /
• v.26 no.3
• /
• pp.18-24
• /
• 2000

The collection of PM10 samples were collected by a PM10 hi-vol. air sampler from June, 1998 through May, 1999 in Kunsan located at western coastal region of Korea. We obtained 84 samples during sampling period. Samples were analyzed to quantify the concentration of ionic and metallic components such as SO42-, NO3-, Cl-, NH4+, K+, Na+, Mg2+, Zn, Cd, Cr, Pb and Fe. Seasonal variations of the concentrations by wind directions of each component were studied. We found that PM10 concentration had the highest level in winter and the lowest level in summer. When the wind direction is from west to east, the concentration of most ionic and metallic species were higher compared to reverse direction. That implied the effect of air pollutants from industrial area. Also, substantial amount of Na+ and Cl- were observed, which was assumed to the effect from the sea.

• Economic and Environmental Geology
• /
• v.20 no.3
• /
• pp.159-168
• /
• 1987

Some physico-chemical properties such as surface area, moisture content, cation exchange capacity, swelling rate, pH, viscosity and liquid limit have been determined for evaluation of Cabentonite deposit occurring in four localities; Yonil, Gampo, Haseo and Pohang, in Gyeongsang-do. Montmorillonite contents can be derived from surface area measurement. Enhancement of liquid limit values and swelling volume were observed in the samples which had higher exchangeable Na ion and finer particle-size distribution. Identical results were observed even in the Na-exchanged samples. This suggests that aggregation effects have a great influence on physico-chemical properties. Aggregation of montmorillonite were controlled not only burial depth but also composition of exchangeable cation. Consequently, sample occurred in Yonil area where has the greatest burial depth in the area show somewhat lower physico-chemical properties than those of samples occurred in the other localities. However, the basic test applied in this study provides very useful preliminary information relating to its commercial potential.

• Korean Journal of Food Science and Technology
• /
• v.22 no.2
• /
• pp.140-144
• /
• 1990

This study was undertaken to examine if sodium acetate and/or calcium chloride would increase the firmness and/or retard rancidity of Kakdugj (Korean seasoned pickles of cubed radish roots) during short $(at\;20^{\circ}C)$ or long $(at\;4^{\circ}C)$ period of fermentation During the fermentation periods, pH and acidity were higher in Kakdugis containing 0.3 or 0.6% Na-acetate than in the other samples at both storage temperatures. Firmness was increased with addition of 0.05% Calcium chloride and synergistic effect on firmness was observed when Calcium chloride and Na-acetate were added together. Sourness did not decreased in samples containing 0.3% Na-acetate at either fermentation periods but decreased in those containing 0.6% Na-acetate and stored for long. Saltiness was increased slightly with the addition of Calcium chloride. Compression test gave closer result to sensory evaluation than puncture test In the measurement of firmness with Instron.

• Korean Journal of Materials Research
• /
• v.15 no.10
• /
• pp.671-677
• /
• 2005

Ti and Ti alloys are known to have excellent corrosion properties, which is an important aspect for biocompability of these implants in human body. In our study, four types of samples (Cp-Ti, Ti-6Al-4V, $0.5wt.\%$ Fe-Ti and ECAP Ti) were tested for their apatite forming ability and corrosion properties. The micropolished samples were treated with 5M NaOH solution at $60^{\circ}C$ for 24 hours. Each samples was gently washed with distilled water and heat-treated at 600"C for 1 hour. The heat-treated samples were soaked in Simulated Body Fluid (SBF) solution at $36.5^{\circ}C$ in an incubator for different period of time. The test revealed that $0.5 wt.\%$ Fe-Ti showing faster apatite growth on the surface (7th day) compared to other samples. Polarization curve test (PCT) was also carried out to determine the corrosion resistance of each samples in SBF solution. ECAP-Ti showed highest corrosion resistance compared to any other samples. $0.5wt.\%Fe-Ti$ showed higher corrosion potential and corrosion current compared to other samples.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.5
• /
• pp.594-603
• /
• 2008

A single particle analytical technique, named low-Z particle electron probe X-ray microanalysis, was applied to characterize four samples collected at an underground shopping area connected to Dongdeamun subway station, in January and May 2006. Based on the analysis of their chemical compositions of the samples, many distinctive particle types are identified and the major chemical species are observed to be soil-derived particles, iron-containing particles. sulfates. nitrates, and carbonaceous particles. which are encountered both in coarse and fine fractions. Carbonaceous particles exist in carbon-rich and organic. Soil derived particles such as aluminosilicates, AlSi/C, $CaCO_3\;and\;SiO_2$ are more frequently encountered in spring samples than winter samples. Nitrate- and sulfate-con taming particles are more frequently encountered in winter samples, and those nitrate- and sulfate-containing particles mostly exist in the chemical forms of $Ca(CO_3,\;NO_3),\;Ca(NO_3,\;SO_4),\;(Na,\;Mg)NO_3\;and\;(Mg,\;Na)(NO_3,\;SO_4)$. Fe-containing particles which came from nearby subway platform are in the range of about 10% relative abundances for all the samples. It is observed that nitrate- and sulfate-containing particles and carbonaceous particles are much more frequently encountered in indoor aerosol samples than in outdoor aerosols, implying that $NO_x,\;SO_x$, and VOCs at the underground shopping area were more partitioned into aerosol phase.