• 제목/요약/키워드: N-heptane

검색결과 188건 처리시간 0.032초

화점높이 변화에 따른 Whirl Fire의 질량감소 및 공기유입속도 (Mass Loss and Air Entrainment Rate of Whirl Fire by Height of Fire Source)

  • 박형주
    • 한국화재소방학회논문지
    • /
    • 제25권2호
    • /
    • pp.126-131
    • /
    • 2011
  • 화점높이 변화에 따른 회오리 화염의 질량감소속도와 공기유입속도를 알아보기 위하여 회오리 화염 연구에서 많이 사용되고 있는 인화성 액체인 메탄올과 노말 헵탄을 사용하였다. 용기의 재질은 스테인레스로 100mm ${\times}$ 100mm ${\times}$ 50mm 크기의 사각형으로 제작하여 연소실험에 사용하였다. 외부로부터 화염으로 의 공기유입속도는 화점의 높이를 0cm에서 30cm로 변화시켰을 때, 0cm의 높이에서 가장 빠른 공기유입속도를 나타냈으며, 동일한 화점의 높이에서는 다점풍속기의 높이가 30cm인 경우에 가장 빠른 평균 공기유입속도와 최대 공기유입속도를 나타내었다. 또한 메탄올과 노말 헵탄의 회오리 화염의 결과로부터 질량감소속도는 노말 헵탄이 메탄올에 비해 1.33~1.58배, 외부로부터 화염으로의 공기유입속도는 노말 헵탄이 메탄올에 비해 4.38~5.44배 각각 빠름을 알 수 있었다. 결론적으로, 회오리 화염에서 질량감소속도와 외부에서 화염으로의 공기유입속도는 화점의 높이가 증가할수록 감소하며, 같은 실험조건에서 시료의 고위/저위 발열량이 높을수록 증가한다는 것을 확인할 수 있었다.

Phase Behavior Study of Poly(ethylene-co-octene) in normal-Hydrocarbons

  • Kwon, Hyuk-Sung;Lee, Sang-Ho
    • Elastomers and Composites
    • /
    • 제38권1호
    • /
    • pp.51-56
    • /
    • 2003
  • Cloud-point and bubble-point data to $170^{\circ}C$ and 50 bar are presented for four different solvents, normal pentane. n-hexane, n-heptane, and n-octane with poly(ethylene-co-42 wt% octene) ($PEO_{42}$) copolymer. The pressure-concentration isotherms measured for $PEO_{42}$ - normal pentane have maximums at around 5 wt% of the copolymer concentrations in the solution. $PEO_{42}$- normal pentane system exhibits LCST-type phase behavior at temperatures greater than $130^{\circ}C$. Below $120^{\circ}C$, bubble-point type transitions are observed. However, the binary mixtures for $PEO_{42}$ in n-hexane, n-heptane, and n-octane have only bubble-point type transitions at the pressure-temperature region investigated in this study. The single-phase region of PEO - alkane mixtures increases with the molecular size of alkane solvent due to the increasing dispersion interactions between PEO and the alkane.

O/W/O형 Emulsion 액체막에 의한 Toluene과 n-Heptane 혼합물의 분리(제1보) (Separation of Toluene/n-Heptane Mixture by O/W/O Type Emulsion Liquid Membrane(part 1))

  • 주명종;김태영;남기대
    • 한국응용과학기술학회지
    • /
    • 제13권3호
    • /
    • pp.95-103
    • /
    • 1996
  • In the separation of toluene/n-heptane mixture by the emulsion type liquid membrane in an batch system, the effect of surfactant on the separation factor and membrane stability was studied over the surfactant concentration ranging form 0.1 to 1.5wt% at the contact time of 5 and 10 minutes. and the settling time of 5 and 10 minutes. The surfactant used was sodium lauryl sulfate. The separation factor reached its maximum value at the surfactant concentration of 0.5wt% for surfantant. It was found that the percentage of membrane breakup reached its minimum values and the separation factor showed its maximum value at the surfactant concentration of 0.5wt%. which confirmed that efficient separation could be effect when emulsion liquid membrane was stable because of low membrane breakup.

O/W/O형 에멀젼 액체막에 의한 Toluene과 n-Heptane 혼합물의 분리에 있어서 계면활성제의 영향 (Effect of Surfactant on the Separation of Toluene/n-Heptane Mixture by O/W/O Type Emulsion Liquid Membrane)

  • 김태영;이주상;최성옥;남기대;박상찬
    • 한국응용과학기술학회지
    • /
    • 제16권1호
    • /
    • pp.95-103
    • /
    • 1999
  • In the separation of toluene/n-heptane mixture by the emulsion type liquid membrane in a batch system, the effect of surfactants on the separation factor and membrane stability were studied over the surfactant concentration ranging from 0.1 to 1.5 wt% at the contact time of 5 and 10 minutes and the settling time 5 and 10 minutes. The surfactants used were triethanol amine lauryl sulfate. The separation factor reached its maximum value at the surfactant concentration of 0.5 wt%. It was found that the percentage of membrane breakup reached its minium values and the separation factor showed its maximum value at the surfactant concentration of 0.5 wt%, which confirmed that efficient separation could be effect when emulsion liquid membrane were stable because of low membrane break up.

디테트라하이드로퍼퓨릴프로판과 용매를 포함하는 이성분계의 상평형 연구 (Study on the Phase Equilibria of Binary Systems Containing Ditetrahydrofurfurylpropane and Solvents)

  • 빈영욱;노경호;박소진;박종기
    • 공업화학
    • /
    • 제22권4호
    • /
    • pp.390-394
    • /
    • 2011
  • 디테트라하이드로퍼퓨릴프로판(Ditetrahydrofurfurylpropane, DTHFP, ($CH_2CH_2CH_2OCH)_2C(CH_3)_2$)과 용매인 사이클로헥산(Cyclohexane), 노말헵탄(n-Heptane), 테트라하이드로퓨란(Tetrahydrofuran), 그리고 물을 포함하는 각 이성분계의 기액상평형을 측정하였다. 기액 상평형 측정은 DTHFP의 농도가 낮은 영역에 대하여 실시하였다. NRTL 모델을 이용하여 기액 상평형을 해석하였으며 측정된 실험자료를 이용하여 NRTL 모델의 이성분계 상호작용 매개변수를 회귀분석하였다.

보조계면활성제가 비이온 계면활성제의 Water in Oil 마이크로에멀젼을 이용한 실리카 나노입자 제조에 미치는 영향 (Effect of Cosurfactant on Preparation of Silica Nanoparticles using Water in Oil Microemulsion of Nonionic Surfactant)

  • 김태훈;임종주
    • Korean Chemical Engineering Research
    • /
    • 제46권2호
    • /
    • pp.356-368
    • /
    • 2008
  • 본 연구에서는 계면활성제, 오일, 암모니아 수용액으로 이루어진 시스템에 보조계면활성제 첨가가 단일상의 마이크로에멀젼을 이용한 실리카 나노입자 제조에 미치는 영향에 관하여 살펴보았다. 동일한 연속상의 오일을 사용한 경우, 단일상의 W/O 마이크로에멀젼 영역은 계면활성제와 연속상 오일의 상호작용에 의하여 결정되었다. 예를 들어 연속상 오일로 cyclohexane을 사용한 경우에는 실험에 사용한 NP(nonylphenol ethoxylate) 계면활성제 중에서 NP-5가 가장 넓은 W/O 마이크로에멀젼 영역을 나타냈으며, NP-4가 가장 좁은 W/O 마이크로에멀젼 영역을 나타내었다. NP 계면활성제 시스템에 n-propanol을 보조계면활성제로 첨가한 경우, 단일상의 영역은 연속상 오일의 종류에 따라 증가 또는 감소하였다. 예를 들어, cyclohexane과 isooctane 시스템에서는 n-propanol 첨가에 따라 단일상의 마이크로에멀젼 영역은 감소하나 n-heptane 시스템의 경우에는 증가하였다. 실리카 나노입자 실험을 수행한 결과에 의하면 NP 계면활성제 시스템의 경우 보조계면활성제를 첨가함에 따라 한 상의 영역에서의 제조와 관계없이 많은 수의 불균일한 입자가 생성되었다. LA-5 계면활성제와 n-heptane 시스템에서의 n-propanol 첨가는 입자의 크기는 감소하며, 개수는 증가하는 경향을 나타내었다. 이는 n-propanol 첨가량이 증가함에 따라 계면활성제의 소수 결합이 증가하여 마이크로에멀젼 사이의 상호 물질 교환이 잘 일어나지 않기 때문으로 생각된다.

액적의 증발에 미치는 수증기 농도의 영향 (Effects of Water Vapor Concentration on a Droplet Evaporation)

  • 김용우;이명준;하종률;정성식
    • 한국분무공학회지
    • /
    • 제4권1호
    • /
    • pp.27-33
    • /
    • 1999
  • An experimental study has been conducted to clarify the effect of vapor on droplet evaporation. Droplets of water, ethanol, n-hexadecane and n-heptane were exposed in air stream. Temperature, pressure, and flow velocity in the ambient air are 470K, 1 atm, and 2m/s, respectively. Measurements are carried out for the wide range of water vapor concentration$(0%\sim40%)$. To obtain the time histories of droplet diameter, suspended droplet in hot and humid air stream was synchronized with a back flash light, and enlarged droplet images were taken on a CCD camera. With the vapor concentration increasing, the evaporation rate constant of water droplet decrease slightly and the droplet of ethanol and n-heptane increase actively. The evaporation rate constant of n-hexadecane which has higher boiling point than water increases within around 30% of the concentration.

  • PDF

방청유 취급 근로자의 휘발성 유기화합물 노출 평가 (Exposure Assessment of Volatile Organic Compounds for Workers Handling Rust-preventive Oils)

  • 정윤경;최상준
    • 한국산업보건학회지
    • /
    • 제27권1호
    • /
    • pp.23-37
    • /
    • 2017
  • Objectives : This study was conducted to evaluate the level of exposure to volatile organic compounds (VOCs) among workers handling rust preventive oils. Methods : A total of 30 bulk samples and 54 personal air samples were collected using diffusive samplers at 22 workplaces handling rust preventive oils in Daegu and Gyongsangbuk-do Province from March to October 2013. We also investigated detailed information on the related work conditions, such as kinds of products, handling methods, local exhaustive ventilation systems, and the status of the wearing personal protective equipment. All bulk samples and air samples were analyzed using gas chromatography mass spectrometry (GC-MS) to identify components to which workers potentially were exposed. Quantitative airborne concentrations of VOCs were confirmed using gas chromatography with flame ionized detectors. Results : In terms of qualitative analyses for the 30 bulk samples, we found carcinogenic, mutagenic and reproductive toxic(CMR) substances such as butane(carcinogenic Group 1A, mutagenic Group 1B), butoxy ethanol(carcinogenic Group 2), cumene (carcinogenic Group 2), ethyl benzene(carcinogenic Group 2), methyl isobutyl ketone(carcinogenic Group 2) and toluene (reproductive toxic, Group 2). As a result of full-shift based personal air samples, eight substances such as n-hexane, n-heptane, octane, nonane, decane, toluene, ethyl benzene and xylene were detected. Among them, n-hexane and n-heptane were detected in all of 54 air samples with $13.13mg/m^3$ and $8.61mg/m^3$ of maximum concentration, respectively. The level of airborne concentration from all of samples were bellow the occupational exposure limit in Korea. Conclusions : Based on the results of this study, workers handling rust preventive oils could be exposed to CMR substances contained in rust preventive oils and n-hexane and n-heptane were found as the most frequent sources of VOC exposure.

불포화지방산(不飽和脂肪酸)의 비색정량법(比色定量法) (Colorimetric Method of Determining Unsaturated Fatty Acids in Animal Tissues)

  • 허린수;장인호
    • Journal of Nutrition and Health
    • /
    • 제15권1호
    • /
    • pp.9-14
    • /
    • 1982
  • The present paper describes a colorimetric method of determining the free and total unsaturated fatty acids in animal tissues. The procedure is based in three steps on the following principles : First step is that the tissue homogenates are extracted in chilled acetone in order to eliminate the interfering substance, such as phospholipids, sulfatides and proteins. At next step, after centrifugation acetone layer is decanted and evaporated to dryness. Then the extract is shaken with heptane to solve in the solvent. That the characteristic nature of copper salts of unsaturated fatty acids are freely soluble in heptane and those of saturated acids are not is the bases of separating one from another. Thus unsaturated fatty acids can be isolated in heptane as their salts from saturated acids and other lipid mixture by shaking with copper reagent. Finally the yellowish brown color developed by adding color reagent (0.2% sodium diethyldithiocarbamate in n-butanol solution) which reacts with the copper salts of the acids and produces the color is measured colorimetrically.

  • PDF

헵탄 풀화재에서 불활성기체 소화농도 (Extinguishing Concentration of Inert Gases in Heptane Pool Fires)

  • 정태희;이의주
    • 한국안전학회지
    • /
    • 제27권3호
    • /
    • pp.71-76
    • /
    • 2012
  • The coflow velocity effect on the minimum extinguishing concentration(MEC) was investigated experimentally in heptane cup-burner flames. Various inert gases($N_2$, Ar, $CO_2$, He) were added into the oxidizer to find the critical concentration and the effectiveness of the agents on flame extinction. The experimental results showed that the MECs were increased with increasing coflow velocity for most inert gases except helium, but the higher coflow velocity induced the lower burning rates of heptane. This indicated that the increase of coflow velocity resulted in the decrease of fuel velocity evaporated from fuel surface, and hence the stain rate on the reaction zone was also decreased. In the case of helium as a additive, the extinguishing concentration was independent of the coflow velocity because the heat conductivity was ten times larger than the other inert gases and flow effect by a strain rate might be compensated for heat loss to the surroundings.