• KSBB Journal
• /
• 제24권4호
• /
• pp.353-360
• /
• 2009

본 연구에서는 혐기조 및 무산소조, 호기조로 구성된 상향류식 고정상 담체 반응장치와 호기조로 고정상 담체 대신에 유동상 담체를 사용한 Loop Reactor로 이루어진 장치에서 생활하수를 이용하여 성능실험을 수행한 후 HRT에 따른 유기물 및 T-N, T-P 등 오염물질의 제거 특성을 비교 분석하였다. 두 반응기 모두 평균 BOD 제거율과 SS 제거율은 HRT가 증가함에 따라 증가하다가 HRT 16 h 이상에서는 일정한 수치를 나타내고 있으며 HRT 16 h에서 고정상 담체 반응기와 Loop Reactor의 평균 BOD 제거율은 각각 86.6%, 90.9%이었으며 평균 SS 제거율은 각각 78.0%, 88.2%로 Loop Reactor의 경우가 각각 4.3%, 10.2%의 더 높은 BOD와 SS 제거율을 나타내었다. 또한 평균 $COD_{Cr}$, 제거율 및 평균 $COD_{Mn}$ 제거율은 BOD와 SS 제거율과 마찬가지로 HRT가 증가함에 따라 증가하다가 HRT 16 h에서 일정한 수치를 나타내고 있으며 고정상 담체 반응기와 Loop Reactor의 평균 $COD_{Cr}$, 제거율은 각각 63.5%, 75.2%이었으며 평균 $COD_{Mn}$ 제거율은 각각 60.7%, 73.6%로 Loop Reactor의 경우가 11.7%, 12.9% 더 높은 제거율을 나타내었다. 반면에 평균 T-N 제거율 및 T-P 제거율은 두 반응기 모두 HRT가 증가함에 따라 제거율은 계속 증가하는 양상을 보여주고 있으며 HRT 16 h에서 Loop Reactor의 경우 평균 T-N 제거율 및 평균 T-P 제거율은 각각 33.6%, 54.5%로 고정상 담체 반응기보다 14.1%, 10.8%의 더 높은 제거율을 나타내었다. 이상의 결과에서 Loop Reactor가 성능이 훨씬 더 우수하였으며 최적 HRT는 16 h임을 알 수 있었다.

• 한국지반환경공학회 논문집
• /
• 제8권6호
• /
• pp.21-28
• /
• 2007

본 연구는 합성하수 처리에 있어 MBR-RO 공정 적용시 유기물 및 질소, 인 제거에 대하여 수리학적체류시간이 제거효율에 미치는 영향을 실험적으로 검토하였다. MBR 공정에서 탁도는 운전기간(105일)동안 2 NTU 이하로 평균 99% 이상의 제거효율을 보였다 또한 수리학적체류시간 6, 12, 18 그리고 24 hour에 대한 $COD_{Cr}$, T-N, $NH_4{^+}-N$ 그리고 T-P의 평균 제거효율을 살펴보면, $COD_{Cr}$의 평균 제거율은 각각 72.4, 84, 88.6 그리고 92.5%, $NH_4{^+}-N$의 제거효율은 각각 60.2, 85.5, 91.3 그리고 92.2%였다. T-N과 T-P의 제거효율은 수리학적 체류시간을 6시간에서 24시간으로 증가시킴에 따라 각각 53.7과 56.8%에서 82.5와 86.4%로 증가했다. RO 공정에서 색도와 $COD_{Cr}$의 제거효율은 각각 99.9%와 96.8%였다. 또한 RO 유출수에서 T-N, $NH_4{^+}-N$, $NO_3{^-}-N$ 그리고 T-P는 평균 90% 이상 제거되었다.

• 한국환경과학회지
• /
• 제4권5호
• /
• pp.123-123
• /
• 1995

The treatment performances of anaerobic-aerobic activated sludge process were investigated under various operation conditions. The treatment system proposed in this study gave a relatively stable performance against hourly change of the flow rate and showed a satisfactory removal of nitrogen and phosphorus compounds under experimental conditions. The recycle ratio of mixed liquor from aerobic to anaerobic region and peak coefficient primarily controlled the extent of nitrogen removal. The recycle ratio had the optimum values which were determined by the microbial activities of nitrification and denitrification. The behavior of the treatment unit could be simulated by using the kinetic equations and reactor models which considered the treatment units as complete mixing tanks.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.3063-3070
• /
• 2014

In this study, poly(N-methylol methacrylamide) (NMMAAm) and poly(N-methylol methacrylamide/vinyl sulphonic acid) (NMMAAm-VSA) hydrogels were synthesized by $^{60}Co-{\gamma}$ ray irradiation at an ambient temperature. The graphs belonging to the gelation percent- percent-dose and swelling curves were drawn by using data which were obtained from water and different pH solutions. Characterization of hydrogels was performed by FTIR and DSC-TGA analysis. Heavy metal ion ($Ni^{2+}$, $Co^{2+}$) removal capacities of hydrogels were investigated in aqueous solutions, which had different concentrations (100-1500 mg/L). In metal ion removal studies, pH value of aqueous medium was kept constant at 5.0. Maximum metal ion removal values were obtained for NMMAAm-VSA (1:3 mole ratio) hydrogels. Metal ion removal capacities of NMMAAm-VSA (1:3 mole ratio) hydrogels were found as 82 mg/g and 98 mg/g for $Ni^{2+}$ and $Co^{2+}$ ions, respectively.

• 한국물환경학회지
• /
• 제27권2호
• /
• pp.235-241
• /
• 2011

This study was performed to investigate the characteristics of nutrient removal of municipal wastewater in the submerged membrane bioreactor by addition of alum directly into aerobic tank. Membrane bioreactor consists of three reactors such as two intermittent anaerobic tanks and the aerobic tank with hollow fiber membrane. The removal efficiencies of $COD_{cr}$, BOD, SS, TN and TP on the membrane bioreactor were 94.0%, 99.1%, 99.9%, 66.9%, and 58.9%, respectively. In addition, The removal efficiencies of $COD_{cr}$, BOD, SS, TN and TP on the membrane bioreactor with alum addition were 93.4%, 99.0%, 99.9%, 63.2%, and 96.8%, respectively. There was little difference between them on the nutrient removal efficiencies except phophorus removal. The estimated sludge production, specific denitrification rate, specific nitrification rate and phosphorus removal content on the membrane bioreactor were 1.76 kgTSS/d, $0.055mgNO_3-N/mgVSS{\cdot}d$, $0.031mgNH_4-N/mgVSS{\cdot}d$, and 0.095 kgP/d, respectively. And The estimated sludge production, specific denitrification rate, specific nitrification rate and phosphorus removal content on the membrane bioreactor with alum addition were 2.90 kgTSS/d, $0.049mgNO_3-N/mgVSS{\cdot}d$, $0.030mgNH_4-N/mgVSS{\cdot}d$, and 0.160 kgP/d, respectively. The alum content added was 1.7 molAl/molP on an average. The increasing ratio of tran-membrane pressure on the membrane bioreactor was $0.0056kgf/cm^2{\cdot}compared$ to $0.0033kgf/cm^2{\cdot}d$ on the membrane bioreactor with alum addition. There was a slightly reduction effect on membrane fouling by alum addition.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.439-446
• /
• 2009

This study was performed to evaluate SND(simultaneous nitrification and denitrification)efficiency, nitrogen removal efficiency and filtration function of non-woven fabric by using submerging MBR packed with granular sulfur covered with non-woven fabric filter. Synthetic wastewater was used as influent wastewater. Concentration of $NH_4{^+}-N$ in influent was maintained about 40 mg/L and the experiment was performed in four phases according to the flow rate. Nitrogen loading rate divided four phases ranging from $0.04 kg\;NH_4{^+}-N/m^3-day$ to $0.16 kg\;NH_4{^+}-N/m^3-day$. As a result, the maximum $NH_4{^+}-N$ removal rate was accomplished at $0.142 kg\;NH_4{^+}-N/m^3-day$ in nitrogen loading of $0.147 kg\;NH_4{^+}-N/m^3-day$. Nitrification efficiency was higher than 95% in all phases. $NO_3{^-}-N$ loading rate was adjusted ranging from $0.22 kg\;NO_3{^-}-N/m^3-day$ to $0.89 kg\;NO_3{^-}-N/m^3-day$. The maximum $NO_3{^-}-N$ removal rate was accomplished up to $0.71 kg\;NO_3{^-}-N/m^3-day$ in $NO_3{^-}-N$ loading of $0.89 kg\;NO_3{^-}-N/m^3-day$. The maximum $NO_3{^-}-N$ removal efficiency was 95% in $NO_3{^-}-N$ loading of $0.22 kg\;NO_3{^-}-N/m^3-day$. T-N removal rate was 90% and concentration of T-N in effluent was 3.7 mg/L in T-N loading rate of $0.039 kg\;NO_3{^-}-N/m^3-day$. In this study, TMP in reactor with and without non-woven fabric filter were observed to define fouling of hollow-fiber membrane module. Reaching time to standard washing pressure(22 cm Hg) of two reactors were 29 days with non-woven fabric But the reactor without non-woven fabric reached standard washing pressure only after 4 days. Accordingly, non-woven fabric was demonstrated the superiority as a filtration ability. With high nitrogen removal rate and decreasing of fouling of membrane, MBR packed with granular sulfur covered with non-woven fabric filter submerging in activated sludge aeration tank can be used as an advanced treatment process.

• 한국응용과학기술학회지
• /
• 제28권1호
• /
• pp.6-9
• /
• 2011

Step feed process was analyzed stoichiometrically for the optimal operation conditions in this study. In case of optimal operation conditions, minimum R (sludge recycling) value, r (internal recycling ratio) value, and n (influent allocation ratio) value for the step feed process to acquire the maximum TN removal efficiency were identified by theoretical analysis. Maximum TN removal efficiency, based on stoichiometric reaction, can be obtained by controlling n value for the step feed process.

• 유기물자원화
• /
• 제10권1호
• /
• pp.102-108
• /
• 2002

The effects of ammonia on mesophilic anaerobic digestion were investigated by operating lab-scale two-stage ASBF reactors using swine wastewaters as influent without and with ammonia removal at HRT of 1-2 days and OLR of $2.2{\sim}9.6kg-COD/m^3{\cdot}d$ for 250 days. The COD removal efficiency and biogas generation of two-stage ASBF reactors was decreased by increasing influent ammonia concentrations to 1,580 mg(T-N)/L with increasing OLR to $6.3kg-COD/m^3{\cdot}d$, while those were increased by maintaining influent ammonia concentrations below 340 mg(T-N)/L by MAP precipitation with increasing OLR to $9.6kg-COD/m^3{\cdot}d$. Initial inhibirion of ammonia on anaerobic processes was observed at a concentration of 760 mg(T-N)/L and the COD removal efficiency and biogas generation dropped to 1/2 at ammonia concentration ranges of 1,540~1,870 mg(T-N)/L. It is essential to remove ammonia in swine wastewaters to an initial inhibition level before anaerobic processes for the effective removal of COD.

• 환경위생공학
• /
• 제13권1호
• /
• pp.91-103
• /
• 1998

Design data for COD and nitrogen removal from wastewater were collected from Pilot's Multi-stage Bio-reactor. Hyraulic conditions and pollutant loadings were varied in order to optimize the biological and operational parameters. Pilot's experimental results summarize as followings. 1. T-N removal efficiency in the organic volumetric loading 0.2 kgCOD/m$^{3}$·d was obtained as maxium of 85% at internal recycle ratio 2.5 and in more ratio than this it was decreased. Organic removal efficiency was about 91% under the overall experimental conditions and not influenced by recycle ratio.. 2. Nitrification reaction was shown as maxium in the SCOD$_{cr}$/NH$^{+}$-N ratio of 6.5 and in more ratio than this it was decreased. Denitrification rate was the maxium as 85% in more than 7.5 of SCOD$_{cr}$/NO$_{x}$-N ratio and in the ratio over this ratio it becomes constant. 3. By utilizing an applied new model of Stover-Kincannon from Monod's kinetic model, concentration of T-N in the effluent according to flow quanity in the influent was estimated as 8.74 and -67.5 respectively. The formula for estimating T-N concentration of effluent was obtained like this: N$_e$=N$_0$(1- $\frac{8.74}{(QN$_0$/A)-67.05}$)

• 상하수도학회지
• /
• 제26권2호
• /
• pp.209-218
• /
• 2012

Recently, as reinforced water quality standards for wastewater has been announced, more efficient and more powerful wastewater treatment processes are required rather than the existing activated sludge process. In order to meet this demands, we evaluate Task 1-4 about lab scale $A_{2}O$　process using biofilm media. Task 1, 2, and 3 use 'Module A' which has 4 partitions (Anoxic/Anerobic/Oxic/Oxic). Task 4 uses 'Module B' which has 2 partitions including a denitrification reactor with an Inclined plug flow reactor (IPFR) and a nitrification reactor with biofilm media. The denitrification reactor of Module B is designed to be upward flow using IPFR. The result of evaluating at each Task has shown that attached growth system has better capacity of removal efficiency for organic matter and nitrogen with the exception of phosphorus.　Task 4 which has the most outstanding removal efficiency has 90.5% of $BOD_{5}$ removal efficiency, 97.8% of ${NH_4}^{+}-N$ removal efficiency, 65% of T-N removal efficiency and 92% of T-P removal efficiency with additional chemical phosphorus removal system operated at HRT 9hr, Qi:Qir 1:2, and BOD/T-N ratio 2.7.