• Carbon letters
• /
• v.11 no.3
• /
• pp.206-210
• /
• 2010

Removal of dyes Reactive Blue 221, N Blue RGB and Acid Blue MTR using two different samples of activated carbon by static batch method was studied. Experimental data on optical density of solutions at different concentrations ranging from 10 to 100 mg/L and of solutions after adsorption on activated carbon samples were measured. Calibration curves were plotted and the amount of dye $q_e$ adsorbed was calculated. The data was fitted to Langmuir and Freundlich isotherms for two different carbon samples and different concentration and pH values. Constants were calculated from the slope and intercept values of the isotherms. Coefficient of correlation $R_2$ and Standard Deviation SD were also noted. The data fitted well to the isotherms. Carbon sample $C_1$ showed higher potential to adsorb all the three dyes. Adsorption was higher at lower concentrations. Carbon sample $C_2$ showed better adsorption in acidic pH as compared to in alkaline pH. From the analysis of the data capacity of $C_1$ and $C_2$ to remove the dyes from water have been compared.

• Korean Journal of Crystallography
• /
• v.12 no.1
• /
• pp.5-9
• /
• 2001

Nd/sub 0.05/Y/sub 0.95/Ca₄O(BO₃)₃(Nd:YCOB) single crystals were grown by the Czochralski method using a iridium crucible under N₂ atmosphere. Optimum growth parameters to get high quality of single crystals were 1.5∼2 mm/hr of growth rate and 10∼20 rpm of rotation rate. The grown crystals were transparent with light purple color and well-developed in cleavage planes. The crystal structure of Nd;YCOB were identified to monoclinic by XRD method. Crystal defects acting as light scattering centers, such as micro-pores, secondary phases, inclusions and cracks were not observed under the He-Ne laser illuminations. Three red, green, blue laser devices for the RGB laser oscillations were designed and then fabricated from the grown Nd:YCOB crystals according to the phase-matching angles of negative type-I which were φ=16.40°, 33.95° and θ=22.59° with the flatness of λ/6 at least, respectively.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.198-198
• /
• 2003

LED(Light Emitting Diode)는 전기 신호를 빛으로 신호를 보내고 받는데 사용되는 반도체의 일종으로 가정용 가전제품, 리모컨, 전광판, 각종 자동화 기기등에 사용된다. 3색광 백색 LED는 soft-UV 또는 blue 빛을 내는 device 와 RGB 형광체로 이루어져 있다. 현재 연구중인 3색광 백색 LED는 InGaN 또는 GaN 이 RGB 형광체를 여기 시키는것이 대부분이다. 이러한 경우에 유기물과 무기물 형과체가 백색광을 구현하기 위해 사용된다. 유기물의 경우에는 lift-time 이 짧고, 무기물의 경우에는 유해원소인 S, Cd등이 포함되기 때문에 환경오염이 야기된다. 이러한 단점을 보완하기 위해 진화 최적방법을 이용하여 alkali earth borosilicate ((Eu,Mg,Ca,Sr,Ba)$_{x}$ $B_{y}$ S $i_{z}$ $O_{d}$ ) 계열에 $^{Eu3+}$을 도핑하여 고효율 형광체를 합성하였다.

• Laser Solutions
• /
• v.14 no.2
• /
• pp.24-29
• /
• 2011

The design of a telecentric f-${\theta}$ lens with a field of view (FOV) $30^{\circ}$ and an effective focal length of 1000mm is presented. The optical stop is placed at the front plane and the design is based on a geometric ray tracing technique, and the designed system consists of a series of convex and concave lenses. The designed f-${\theta}$ lens showed a considerable reduction in weight with a simplified structure and resulted in a good performance in the designated FOV. Detail analysis of rays is also presented. 653nm (red laser), 586nm (green laser), and 468nm (blue laser) were simulated as a light source and image illuminating source. The developed optical design requires 7 pieces of lenses made of SF1, N-FK56, N-LAK33, and BK7 glass materials. With optimal parametric design, the effective focal length was calculated to be 974.839mm which is very close to the initial design target. For the manufacturing purpose, the dimensions of lens curvature and thickness were truncated with error ranging 0.1% to 3.2%. As a result, the overall error was calculated to be 3.2% which can be still tolerable for display, laser material, and machining processing.

• Carbon letters
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2008

The ability of cow dung ash without any pretreatment to remove color from textile dyes N Blue RGB, Green B and EOSIN YWS from aqueous solution has been investigated in this work. Cow dung ash, an ecofriendly and low cost adsorbent was prepared by burning cow dung cakes in the muffle furnace at $500^{\circ}C$. The adsorption was achieved under different pH and adsorbate concentration. The data was fitted to simple polynomial and the isotherms similar to Langmuir and Freundlich isotherms.

• The Journal of Korean Physical Therapy
• /
• v.23 no.1
• /
• pp.45-51
• /
• 2011

Purpose: This study investigated the effect of needle electrode stimulation at various frequencies on change in wound healing in excision wound rats Methods: Twenty-four Sprague-Dawley adult male rats were assigned to one of four groups: control (n=6), acupuncture group (n=6), low rate (2 Hz) percutaneous electrical stimulation group, high rate (100 Hz) percutaneous electrical stimulation group (n=6). We analyzed morphological effects by measuring the area of the excision wound, the contraction rate, and chromatic red. A digital camera and an image analysis program were used to measure and analyze the wound area,which was also used for the contraction rate. Chromatic red was obtained by calculating red, green, and blue (RGB) values of the wound area. Results: The electro acupuncture stimulation groupsshowed significant healing effects compared to the control and acupuncture groups. Conclusion: The results of this study showed that various frequencies of percutaneous electrical stimulation have a therapeutic effect on wound healing.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.39-39
• /
• 2001

The accurate representation of the colors of dyed fabric on a color CRT(cathode ray tube) screen is the basis for the automatic process in dyeing industry. In the former study, we had focused on the theoretically color matching method between CIE(International Commission on Illumination) and RGB color coordinates, but In this study we tried simulating the colors obtained from fabrics on the color CRT by using experimental method. we obtained the following results. 1. We could simulate all of the color CRT by gamut mapping method, even though some of the KOSCOTE(Korea Standard Color of Textile) colors represented on the color CRT didn′t exist in the region of color region. 2. We could do conditional matching by CIE system, even though it was hard to do invariant matching the Red, Green, Blue phosphers of the color CRT because of the SPD(Spectral Power Distribution) which had been set up before. 3. We could simulate all the colors obtained from fabrics on the color CRT by matching those two color groups from KOSCOTE fabrics and color CRT using match algorithm and matching programs. 4. If we get over on obstacles by grafting CCM and CCK machines which have been used in educational and industrial areas by matching KOSCOTE with color CRT we will be able to invent color simulation system controled automatically.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1583-1586
• /
• 2006

All non-dopant white organic light-emitting diodes (WOLEDs) have been realized by using solid state highly fluorescent red bis(4-(N-(1- naphthyl)phenylamino)phenyl)fumaronitrile (NPAFN) and amorphous bipolar blue light-emitting 2-(4- diphenylamino)phenyl-5-(4-triphenylsilyl)phenyl- 1,3,4-oxadiazole (TPAOXD), together with well known green fluorophore tris(8- hydroxyquinolinato)aluminum $(Alq_3)$. The fabrication of multilayer WOLEDs did not involve the hard-tocontrol doping process. Two WOLEDs, Device I and II, different in layer thickness of $Alq_3$, 30 and 15 nm, respectively, emitted strong electroluminescence (EL) as intense as $25,000\;cd/m^2$. For practical solid state lighting application, EL intensity exceeding $1,000\;cd/m^2$ was achieved at current density of $18-19\;mA/cm^2$ or driving voltage of 6.5-8 V and the devices exhibited external quantum efficiency $({\eta}_{ext})$ of $2.6{\sim}2.9%$ corresponding to power efficiency $({\eta}_P)$ of $2.1{\sim}2.3\;lm/W$ at the required brightness.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.377-385
• /
• 2020

Recently, wheat consumption has been increasing in Korea, requiring increased production. Nitrogen fertilization is a critical determinant in crop yield; therefore, it is necessary to optimize the nitrogen fertilization regime with current trends that emphasize the minimum impact of nitrogen fertilizer on the environment. In this study, both nondestructive spectral analysis using a hyperspectral camera and growth analysis were performed to determine the optimal N top-dressing rates after heading. The nitrogen application regimes consisted of three conditions according to the secondary top-dressing rate: N_4:3:0 (0 kg 10 a^-1), N_4:3:3 (2.73 kg 10 a^-1), and N_4:3:6 (5.46 kg 10 a^-1). Subsequently, growth and physiological investigations were performed at the jointing, heading, and ripening stages of wheat, and spectral investigations were conducted. On April 29, as the nitrogen fertilization rate was increased to N_4:3:3 and N_4:3:6, plant height and grain yield increased by 4% and 8%, and 8% and 52%, respectively, compared to those under N_4:3:0. Leaf area index and SPAD value also increased by 13% and 24%, and 32% and 43%, respectively. The R (red), G (green), and B (blue) of leaf color were lowered by 15, 11, and 4 in N_4:3:3 and 44, 34, and 18 in N_4:3:6, respectively, as compared to the control. Grain yield was the highest at high top-dressing (N_4:3:6), however, there was no difference between no top-dressing (N_4:3:0) and intermediat top-dressing (N_4:3:3). The reflectance analyzed using a hyperspectral camera showed a difference in the near-infrared (NIR) region on March 19, and on April 29, there was a difference both in the visible light region greater than 550 nm and the NIR region. Vegetation indices differed according to fertilization regime, except for the greenness index (GI). The results of this study showed that not only growth and physiological analysis but also spectral indices can be used to optimize the nitrogen top-dressing rate.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.2
• /
• pp.123-144
• /
• 2017

Objective: The objective of this study is to evaluate affection on how users perceive colors viewed from an automotive visual display according to cultural and radical differences including North America, Europe, and Southeast Asia. This study especially aims to identify effects of the variation of tone and chroma of representative color groups by analyzing affection differences depending on cultural and racial differences targeting the colors constituted through variation of tone and chroma, centered on representative colors. Background: The colors of the menu, information display or background viewed through an automotive visual display are an important factor stimulating consumer's affection, and therefore an effort to express the vehicle's brand and product image through colors is made. The studies on colors focus only on the research on unique characteristics of colors, but an affective approach lacks according to cultural and racial differences on colors considering tone and chroma variation within a color from the currently used automotive visual displays. Method: To grasp the visual affection felt by users, this study extracted affective adjectives related with colors through existing literature and a dictionary for adjectives, and presented human affection dimensions on colors through evaluation of various colors. Prior to carrying out affection evaluation, the basic light sources, red (R), green (G), and blue (B) constituting the colors used for automotive visual displays were defined as a representative color group, respectively. When colors in a color group are constituted, the evaluation target of each color group consisted of the colors considering the variation of tone and chroma by changing color sense through RGB values of the remaining two light sources. And then, this study carried out affection evaluation on the constituted colors targeting the subjects with cultural and racial differences. Results: As a result of evaluating the constituted colors with representative affections, there were statistically significant differences between the groups having cultural and racial differences. As a result of S-N-K post-hoc analysis on the colors showing significant differences, North America and Europe were classified as heterogeneous groups. In some cases, Korea was classified as the homogeneous group with North America, but Korea was mainly classified as the homogenous group with Europe. Conclusion: The representative affections on colors from an automotive visual display was drawn as three affective dimensions: passionate, neat, and masculine. Based on these, the affection of Korea and Europe on the constituted colors showed significant differences from that of North America, as a result of affection evaluation on the constituted colors viewed through the visual display by reflecting cultural and racial factors. Regarding representative color groups, bigger cultural and racial differences were revealed in terms of affection on red and green colors than on blue color, and variation of affection was the biggest in the red color. Application: This study analyzed correlations of affection considering the colors constituted through variation of tone and chroma, and the culture and race in the representative color groups constituting a visual display. The results of this study are predicted to be utilized in coordination and selection of colors viewed from an automotive visual display taking into account culture and race.