• 한국환경농학회지
• /
• 제11권3호
• /
• pp.201-208
• /
• 1992

쓰레기 매립장 침출수를 모래, 연탄제, fly ash 및 활성탄을 각각 충전시킨 column에 8주간 매주 통과시켜 오염물질 제거율을 조사한 결과 COD는 활성탄 column에서 8주동안 평균 83%이상 제거되었으며, 연탄재와 fly ash column에서는 시간이 경과함에 따라 제거되는 비율이 낮아지는 경향이었으나 8주 평균 각각 45% 및 43% 제거되었고, 모래 column에서는 거의 제거되지 않았다. $NH_4\;^+$-N는 모든 column에서 8주 평균 60%이상 제거되었으며, Hardness는 활성탄과 fly ash column에서는 8주간 지속적으로 제거된 반면 연탄재 및 모래 column에서는 불규칙적이었고 특히 8주째에는 거의 제거되지 않았다. $PO_4\;^{3-}$는 1주 이후부터 모든 column에서 불규칙적으로 제거되었으며, 특히 fly ash column에서는 4, 5주째 폐기물 침출수 원액에 비해 $PO_4\;^{3-}$가 4배 높게 나타났으며, $CI^-$ 및 $SO_4\;^{2-}$등의 음이온은 1주 이후부터 모든 column에서 제거되지 않았으며, 이는 충전 물질과 침출수의 pH가 높았기 때문인 것으로 사료되었다. 각 column내 각 오염물질 흡착량을 토대로 각 흡착성분간 상관관계를 검토한 결과 활성탄, fly ash 및 연탄재 column에서는 양이온간에 서로 유의적인 정의 상관이 있었으며 모래 column에서는 유의적인 상관이 없었고, 활성탄과 fly ash column에서는 음이온간에 유의적인 상관이 있었다. 그리고 모든 column에서 양이온과 음이온간에는 대부분 유의적인 상관이 없었다.

• Environmental Engineering Research
• /
• 제23권3호
• /
• pp.288-293
• /
• 2018

The main objective of this study is to investigate the influence of hydraulic retention time (HRT) on biogas production during leachate treatment using an anaerobic reactor type Upflow Anaerobic Sludge Blanket. For this purpose, four HRTs ranging from 12 to 48 h were experienced. The obtained results showed that higher amount of biogas could be produced during longer HRTs. However, HRTs longer than 48 h could not affect clearly the biogas generation and considered as unnecessary given the small additional amount of biogas produced during the degradation process. A volume of $0.434L/L_{leachate}/d$ was achieved during the treatment with a HRT of 48 h. The higher biogas production, the smaller chemical oxygen demand (COD) values achieved. Besides, COD removal and biogas production positively correlate, showing that the active biomass has degraded effectively the organic load to produce biogas. Moreover, all the analyzed physicochemical parameters have experienced a decrease after 48 h except for the pH, which increased to approximately neutral value. More precisely, a decrease of 93.8%, 89.7%, 95%, 70%, 77%, and 84.4% was recorded for COD, electrical conductivity, total suspended solid, turbidity, $NH_4{^+}-N$, and $NO_3{^-}-N$, respectively.

• The Journal of Advanced Prosthodontics
• /
• 제6권4호
• /
• pp.295-301
• /
• 2014

PURPOSE. Numerous methods were used to etch the fiber posts to improve its bonding to root canal dentin. Our aim was to evaluate the efficacy of 37% phosphoric acid in etching fiber posts in comparison with 24% hydrogen peroxide. MATERIALS AND METHODS. Ninety human maxillary central incisors were taken and post space preparation was done. Ninety fiber posts were taken and divided into three groups (n=30) based on the surface treatment they received ($H_3PO_4$, $H_2O_2$, distilled water) and each group was further divided (n=10) based on the time period of application (15 seconds, 30 seconds, 60 seconds). All the posts were luted into canals using Rely X UniCem-2. Each tooth was then sectioned into six slices and subjected to push out test. Data obtained was subjected to statistical analysis at P<.05. The surface topography was evaluated using scanning electron microscopy. RESULTS. Highest bond strength values were noted in 15 seconds etched phosphoric acid group and 60 seconds etched hydrogen peroxide group with no significant difference between two groups. Surface topography revealed complete epoxy layer removal with no damage to its structural integrity in those groups. CONCLUSION. $H_3PO_4$ etching for a period of 15 seconds is an effective alternative in improving the adhesion of fiber post to root dentin.

• Membrane and Water Treatment
• /
• 제9권5호
• /
• pp.327-334
• /
• 2018

The nano/micro composites with highly porous surface area have attracted of great interest, particularly the synthesis of porous and thin film sheets of high performance. In this paper, an easy method of cost-effective synthesis of thin film ceramic fiber membranes based on Hydroxyapatite, and activated carbon by turned into studied to be applied within the service-facilitated the transport of radioactive waste such as $^{90}Sr$, $^{137}Cs$ and $^{60}Co$) as activated product of radioisotopes from ETRR-2 research reactor and dissolved in 3M $HNO_3$, across a thin flat-sheet supported liquid membrane (TFSSLM). Radionuclides are transported from alkaline pH values. The presence of sodium salts in the aqueous media improves in $HNO_3$, the lowering of permeability because the initial $HNO_3$ concentration is improved. The study some parameters on the thin sheet ceramic supported liquid membrane. EDTA as stripping phase concentration, time of extraction and temperature were studied. The study of maximum permeability of radioisotopes for all parameters. The pertraction of a radioactive waste solution from nitrate medium were examined at the optimized conditions. Under the optimum experimental 98.6-99.9% of $^{90}Sr$, 79.65-80.3% of $^{137}Cs$ and $^{60}Co$ 45.5-55.5% in 90-110 min with were extracted in 10-30 min, respectively. The process of diffusion in liquid membranes is governed by the chemical diffusion process.

• 한국환경과학회지
• /
• 제15권2호
• /
• pp.169-175
• /
• 2006

The changes of contaminants and odor corresponding to anaerobic maturation process of piggery slurry were investigated by applying the additives, such as different kinds of complex microorganism products and deodorants containing microorganism activating agents. The pHs during 20-day anaerobic maturation were operated stably without great change regardless of the additives, although they were rather lower in the case that the additives were contained than the case that they were not contained. The effects of removing CODcr, $NH_3-N$, T-N, and T-S in case that the additives were not contained, were not so great during the 20-day operation and so it would be difficult to remove the organic materials and nitrogen ingredients simply with anaerobic maturation process. However, in case of anaerobic maturation process that the additives were contained, their average removal rates were improved with the values of $49\%,\;63.5\%,\;48.5\%,\;and\;30.7\%$ for above each of items, even if the 20-day of short-term maturation period was applied. Especial1y, odor intensity with the additives was lowered continuously during the operation period and it had more than two times of lowering effect compared to that without those.

• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.79-87
• /
• 2014

PURPOSE. The aim of this study was to determine the efficiency of Erbium, Chromium: Yttrium-Scandium-Gallium-Garnet laser in different output powers for removing permanent resin cement residues and therefore its influence on microshear bond strength compared to other cleaning methods. MATERIALS AND METHODS. 90 extracted human molars were sectioned in 1 mm thickness. Resin cement was applied to surface of sliced teeth. After the removal of initial cement, 6 test groups were prepared by various dentin surface treatment methods as follows: no treatment (Group 1), ethylene diamine tetra acetic acid application (Group 2), Endosolv R application (Group 3), 1.25 W Erbium, Chromium:Yttrium-Scandium-Gallium-Garnet laser irradiation (Group 4), 2 W Erbium, Chromium:Yttrium-Scandium-Gallium-Garnet laser irradiation (Group 5) and 3.5 W Erbium, Chromium:Yttrium-Scandium-Gallium-Garnet laser irradiation (Group 6). The topography and morphology of the treated dentin surfaces were investigated by scanning electron microscopy (n=2 for each group). Following the repetitive cementation, microshear bond strength between dentin and cement (n=26 in per group) were measured with universal testing machine and the data were analyzed by Kruskal Wallis H Test with Bonferroni correction (P<.05). Fracture patterns were investigated by light microscope. RESULTS. Mean microshear bond strength ${\pm}$ SD (MPa) for each group was $34.9{\pm}17.7$, $32.1{\pm}15.8$, $37.8{\pm}19.3$, $31.3{\pm}12.7$, $44.4{\pm}13.6$, $40.2{\pm}13.2$ respectively. Group 5 showed significantly difference from Group 1, Group 2 and Group 4. Also, Group 6 was found statistically different from Group 4. CONCLUSION. 2 W and 3.5 W Erbium, Chromium: Yttrium-Scandium-Gallium-Garnet laser application were found efficient in removing resin residues.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제8권1호
• /
• pp.101-106
• /
• 2004

The process of removal of gummy proteinous material sericin from silk is commonly called as degumming loss or boil-off loss ratio. In the present study, the boil-off loss ratio in the cocoon shells of twelve multivoltine${\times}$bivoltine hybrids and their parents were analysed. Inheritance pattern of boil-off loss ratio was analysed in crosses involving high and low boil-off loss parents, F$_1$s, F$_2$s and back-crosses by parent off spring regression analysis. Heterosis and heterobeltiosis was also analysed for this character, Highly significant (P＞0.01) variations were observed in eight out of ten multivoltine and two out of five bivoltine parents indicating the presence of genetic variation in the expression of boil-off loss ratio. Among F$_1$ hybrids, ten hybrids expressed significant (P＞0.01) variations when compared with control hybrid PM${\times}$NB$_4$D$_2$. Significant negative heterosis was expressed in three multi ${\times}$ bi hybrids viz., BL67${\times}$CSR$_{101}$, 96A${\times}$CSR$_{19}$ and 96C${\times}$CSR$_{19}$, which is desirable for this character, whereas expression of heterobeltiosis was significant only with one hybrid, 96C${\times}$CSR$_{18}$ in desired direction. Studies on inheritance pattern showed that the character is heritable and contribution percentage of female and male in the ratio of 50.9: 49.1 and it appears that both the parents are influencing in the expression of boil-on loss ratio in silkworm. Based on the overall performance and evaluation by multiple trait evaluation index and also considering the expression of the boil-off loss ratio three hybrids vix., BL67 ${\times}$ CSR$_{101}$, 96A${\times}$CSR$_{19}$ and 96C${\times}$CSR$_{18}$ were found superior and recommended for commercial exploitation.n.ion.n.

• Clinical and Experimental Reproductive Medicine
• /
• 제16권2호
• /
• pp.131-138
• /
• 1989

The present study was designed to develop a new method for the determination of estrogen receptor in porcine uterus using frozen sections. Cryostat sections were incubated with $^3H$-estradiol($^3H$-$E_2$) in the presence or absence of diethylstilbestrol(DES) and the radioactivity of 3H-E2 bound to estrogen receptor(ER) was detected. The level of specific estrogen receptor was determined by Scatchard analysis. The highest ratio of specific binding against total binding was achieved in 3 sec. tions(5mm x 5mm) which was corresponded to lOO${\mu}$/ml protein concentration. Optimal binding was obtained during incubation with $^3H$-$E_2$ for 30 minutes at 23$^{\circ}C$ after treatment of sections with acetone for 20 seconds. Three time-washing of sections was proved to be appropriate for the removal of unbound 3H-E2. 200-fold molar excess of DES was substituted for the binding of $^3H$-$E_2$ to ER sufficiently(binding efficiency of 54.8%). ER was saturated with 4nM of $^3H$-$E_2$ and its dissociation constant was 0.1nM. ER assay using frozen sections(Histological radioreceptor assay, HRRA) was significantly correlated with radioreceptor assay for estradiol(RRA, 0.976 , p

• 미생물학회지
• /
• 제53권2호
• /
• pp.83-96
• /
• 2017

부산시 영도구의 혁신지구의 인공해수천은 높아진 하상과 조류의 특성으로 인해 물이 순환되지 않고 더구나 주위의 오수가 유입되고 있어서 수질이 나빠지고 악취를 발생하고 있다. 이 문제를 해결하기 위한 방안으로 가장 오염되고 조류이동을 감안한 하천의 지점에 생물증강법을 적용하여 친환경적, 효율적으로 하천을 정화하고자 하였다. 현장에서 활성화된 복합미생물을 가장 오염된 지점(Site 2)에 7~10일 간격으로 투입하여, 수질의 pH, 온도, DO, ORP, SS, COD, T-N, 및 T-P를 측정하였고 또한 하상퇴적토의 COD 및 미생물군집을 분석하였다. 13개월 후 Site 2의 수질 SS, COD, T-N 및 COD (퇴적토)의 처리효율은 각각 51%, 58%, 27% 및 35%으로 나타났으나 T-P는 오히려 47% 증가를 보였다. 대부분의 측정지점에서 황산염환원세균(sulfate reducing bacteria)그룹 (Desulfobacteraceae_uc_s, Desulfobacterales_uc_s, Desulfuromonadaceae_uc_s, Desulfuromonas_g1_uc and Desulfobacter postgatei)과 Anaerolinaeles의 밀도는 대체적으로 생물증강에 의한 정화가 진행될수록 감소하였으며, 반면에 Gamma-proteobacteria (NOR5-6B_s and NOR5-6A_s), Bacteroidales_uc_s, 및 Flavobacteriales_uc_s의 밀도는 증가하는 경향이었다. 상대적으로 COD가 낮고 DO가 높은 청정지점인 St. 4에서는 호기성미생물인 Flavobacteriaceae_uc_s가 우점하였다. 이러한 미생물군은 하천의 정화과정을 추적할 수 있는 지표미생물로 활용될 수 있을 것으로 판단되었다. 생물증강 시행 후의 대표적 시점 퇴적토시료의 미생물군집 alpha diversity 지수(OTUs, Chao1 및 Shannon 지수)는 시행 전에 비해 감소하는 경향을 보였으며, 또한 beta diversity 분석기법(fast unifrac 분석)으로 분석한 결과 정화 전이나 초기에 비해서 정화가 진행될수록 전반적으로 시료에 무관하게 미생물군집의 유사성을 보여 생물증강이 현장 토착 미생물의 군집구조를 변화시키고 있음을 확인하였다. 이러한 사실로 보아 본 복합미생물에 의한 현장 생물증강법은 brine water 및 담수로 이루어진 오염된 하천을 환경친화적, 경제적으로 정화할 수 있는 대안으로 판단이 되었다.

• 해양환경안전학회지
• /
• 제10권1호
• /
• pp.69-73
• /
• 2004

새우양식장의 저질에서 암모니아, 황화수소가스와 같은 독성물질의 용출은 수질관리에서 매우 중요하다. 그러므로 이 연구에서는 칼럼에 저질을 주입하고 저질 개선제로 활성탄, 제올라이트, 패각 그리고 철 등을 주입하여 저질로부터 용출되는 독성물질을 중심으로 수질에 미치는 영행을 평가하였다. 암모니아 질소($NO_3$)는 제올라이트와 패각을 주입한 곳에서 효과적으로 제거되었다. 제올라이트는 암모늄이온($NH_4^+$)을 이온교환으로 제거된 것으로 판단되며, 패각은 pH의 상승을 방지하여 안정하게 pH를 유지시켜 암모니아가스($NO_3$)의 농도를 낮게 유지하는 것으로 나타났다. 황화수소와 COD는 활성탄을 주입한 곳에서 효과적으로 제거되었으며 황화수소는 패각에서도 부분적으로 제거가 일어난 것으로 나타났다. 인은 활성탄, 패각, 철에서 잘 제거되었다. 새우 양식장에서는 특히, 주간에 플랑크톤의 광합성에서 의해서 pH가 상승하게 되며 이것은 암모니아가스의 농도가 높게 된다. 그러나 패각의 주입은 pH의 상승을 방지하여 암모니아가스의 농도가 높게 된다. 그러나 패각의 주입은 pH의 상승을 방지하여 암모니아가스의 농도를 낮게 유지할 수 있다는 것을 나타내고 있다.