• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.246-252
• /
• 2000

Thermoelectric properties of the $Bi_2(Te_{0.85}Se_{0.15})_3$ alloy, prepared by mechanical alloying and hot pressing, were investigated with the variation of the hot-pressing temperature ranging from $300^{\circ}C$ to $550^{\circ}C$. Contrary to the p-type behavior of single crystal, the hot-pressed $Bi_2(Te_{0.85}Se_{0.15})_3$ alloy exhibited n-type conduction without addition of donor dopant. When the $Bi_2(Te_{0.85}Se_{0.15})_3$ powders were annealed in $(50{\%}\;H_2+50{\%}\;Ar)$ atmosphere, the hot-pressed specimens exhibited a positive Seebeck coefficient due to the reduction of the electron concentration by removal of the oxide layer on the powder surface and annealing-out of the excess Te vacancies. Figure-of-merit of the hot-pressed $Bi_2(Te_{0.85}Se_{0.15})_3$ alloy was improved by hot pressing at temperatures above $450^{\circ}C$, and the maximum value of $1.92{\times}10^{-3}/K$ was obtained for the specimen hot-pressed at $550^{\circ}C$.

• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.704-716
• /
• 2012

This paper provides a detailed account of pilot testing conducted at South Lake Tahoe (California), the Ddukdo (Seoul) water treatment plant (WTP) and the Bokjung (Seongnam) WTP between February, 2010, and February, 2012. The objectives were first, to characterize the reactions of ozone with hydrogen peroxide (Peroxone) for Han River water following sand filtration, second to determine empirical ozone and hydrogen peroxide doses to remove a taste-and-odor surrogate 2-methylisoborneol (MIB) using an advanced oxidation process (AOP) configuration and third, to determine the optimum dosing configuration to reduce residual ozone to a safe level at the exit of the process. The testing was performed in a real-time plant environment at both low- and high seasonal water temperatures. Experimental results including ozone decomposition rates were dependent on temperature and pH, consistent with data reported by other researchers. MIB in post-sand-filtration water was spiked to 40-50 ng/L, and in all cases, it was reduced to below the specified target level (7 ng/liter) and typically non-detect (ND). It was demonstrated that Peroxone could achieve both MIB removal and low effluent ozone residual at ozone+hydrogen peroxide doses less than those for ozone alone. An empirical predictive model, suitable for use by design engineers and operating personnel and for incorporation in plant control systems was developed. Due to a significant reduction in the ozone reaction/decomposition at low winter temperatures, results demonstrate the hydrogen peroxide can be "pre-conditioned" in order to increase initial reaction rates and achieve lower ozone residuals. Results also indicate the method, location and composition of hydrogen peroxide injection is critical to successful implementation of Peroxone without using excessive chemicals or degrading performance.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.7
• /
• pp.697-703
• /
• 2006

Endocrine disruptors were measured with GC/MS in effluents discharged from sewage treatment processes in pilot scale for the purpose of water reuse. From that analysis, we compared the removal rate of them by treatment processes. Nonylphenol was mainly detected in effluents and high concentration from 0.36 to 0.94 ${\mu}g/L$. $17{\beta}$-estradiol(E2) and $17{\alpha}$-ethynylestradiol(EE2) were detected as below the limit of detection in effluent. Endocrine disruptors were removed effectively in the range from 50 to 100% by treatment process. EC50 value($9.0{\times}10^{-3}$ M) of $17{\beta}$-estradiol(E2) by dose response curve of E-screen assay has higher than that of bisphenol A($2.736{\times}10^{-5}M$) and p-octylphenol($9.760{\times}10^{-6}$ M). These results showed that alkylphenols have lower relative estrogen potency than other estrogens such as $17{\beta}$-estradiol(E2). Calculated estrogenic activity(ng-EEQ/L) was 2 times higher than measured total estrogenic activity which estimated by E-screen assay. Moreover estrogenic activity of effluent by treatment process showed very low as below 1 ng-EEQ/L.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.2
• /
• pp.93-101
• /
• 2000

The objective of this study was to evaluate the possibility of co-digestion of food waste and sewage sludge mixture using anaerobic system. The Biochemical methane Potentials of cabbage and food waste were $297ml\;CH_4/g$ VS and $306.7ml\;CH_4/g$ VS, respectively. The biodegradability of food waste was 60%. The concentrations of acetate, propionate, and isobutyrate produced during the aerobic acidogenesis of food waste for 36 hours were 7,000~7,200 ppm, 260~280 ppm, 380~400 ppm, and 40~50 ppm, respectively, of which acetate was over 85%. The concentrations of acetate, propionate, and isobutyrate produced during the anaerobic acidogenesis for 36 hours were 1,400~1,600 ppm, 30~40 ppm, 220~250 ppm, and 260~300 ppm, respectively, of which acetate was over 70%. The biodegradabilities of aerobic and anaerobic acidogenesis were 30% and 25%, respectively. Methanogensis could be activated under 1 % of NaCl and 1,000 ppm of volatile fatty acids at the range of pH 6.8~7.2. The maximum mixture ratio of food waste and sewage sludge in the present study was 2:8 by the result of VS removal rate and Methane production.

• Korean Journal of Environmental Biology
• /
• v.22 no.1
• /
• pp.120-126
• /
• 2004

Kenaf plants were hydroponically grown in reactor containing toxic metals as Cd, Cu, Cr, Ni and Zn to examine the ability to take up heavy metal. The plants were fertilized using a nutrient solution, which was appropriately adjusted to optimum pH, DO and conductivity. For n hydraulic retention time of 8 days, Cr, Cd, Cu, Ni and Zn were removed up to 90.5, 80.5, 66.1%, 71.1% and 79.4%, and reduced from 2.34 to 0.54 mg $L^{-1}$, 3.37 to 1.07 mg $L^{-1}$, 4.92 to 3.19 mg $L^{-1}$, 6.31 to 4.41 mg $L^{-1}$ and 6.27 to 2.09 mg $L^{-1}$. Especially, accumulation rate of Cr, Cd, Cu, Ni and Zn in the plant were measured up to 347.32, 275.39, 157.52, 50.48 and 211.01 mg DW kg $L^{-1}d^{-1}$, respectively. We considered that Kenaf plants removed Cr, Cd and Zn more effectively than other toxic metals applied.

• Journal of the Korean Chemical Society
• /
• v.62 no.5
• /
• pp.358-363
• /
• 2018

The purpose of this study is to show the possibility of using Cu catalyst in removal of $NO_x$ from automobile exhaust which is regarded as the primary source of fine dust PM2.5. The energy and the bond lengths of the three possible structures of Cu-NO complex, which is formed by binding NO molecule to Cu, and the changes in IR and Raman spectra are calculated using MPW1PW91 method on the level of 6-311(+)G(d,p) of basis sets with Gaussian 09 program. As a result, the enthalpy of formation of the Cu-NO complexes are obtained as ${\Delta}H=104.89$, 91.98, -127.48 kJ/mol for the linear, bent, and bridging forms of them, respectively. And the bond lengths between N and O in NO complexes, which becomes longer than NO molecule, indicates that O is easily reduced from Cu-NO. In addition, the Cu-NO complexes using Cu catalyst can be easily measured by infrared or Raman spectroscopy because in the IR and Raman spectra of the NO and Cu-NO complexes the positon and the intensity of bands are definitely different in each vibration mode.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.975-984
• /
• 2018

Fast pyrolysis bio-oil has unfavorable properties that restrict its use in many applications. Among the main issues are high acidity, instability, and water and oxygen content, which give rise to corrosiveness, polymerization during storage, and a low heating value. Esterification and azeotropic water removal can improve all of these properties. A 500 g of Quercus mongollica which grounded 0.8~1.4 mm was processed into bio-oil via fast pyrolysis for 2 seconds at $550^{\circ}C$. The esterification consists of treating pyrolysis oil with a high boiling alcohol like n-butanol at $70^{\circ}C$ under reduced pressure (100 hPa). All products are analyzed for water mass fraction, viscosity, higher heating value, pH, FT-IR and GC/MS. The water mass fraction can be reduced by 91.4 % (from 31.5 % to below 2.7 %), the viscosity by 65.8 % (from 36.5 to 12.5 cP) and the higher heating value can be increased by 96.8 % (from 3,918 to 7,712 kcal/kg), the pH by 1.3 (from 2.7 to 4.0). FT-IR and GC/MS analysis indicated that labile acids, aldehydes, ketones and lower alcohols were transformed to stable target products. Using this approach, the water content of the pyrolysis oil is reduced significantly. These improvements should allow the utilization of upgraded pyrolysis liquids in standard boilers and as fuel in CHP (Combined heat and power) plants.

• Microbiology and Biotechnology Letters
• /
• v.26 no.1
• /
• pp.83-88
• /
• 1998

Heavy metal removal by Z. ramigera 115 and soluble slime polymer producing mutant Z. ramigera 115SLR was investigated. Both strains showed similar tolerance against $Cd^{2+}$, $Co^{2+}$, $Cu^{2+}$, $Ni^{2+}$ and $Fe^{2+}$. When cells were cultivated in the presence of 500 ppm $Cd^{2+}$, the mutant strain removed 1.5 fold more metal than the wild type did at same biomass. Metal adsorption capacities were in the order of Z. ramigera l15SLR polymer > Z. ramigera 115 polymer > Z. ramigera 115 cell >Z. ramigera l15SLR cell. The optimum pH for metal adsorption was 7.5. Langmuir and Freundlich isotherms indicated that Qmax and 1/n of Z. ramigera l15SLR polymer were 164.2 mg $Cd^{2+}$/g dw and 0.496, respectively. These results showed that the polymer of Z. ramigera l15SLR could be used as an effective metal adsorbate.

• The Korean Journal of Physiology and Pharmacology
• /
• v.21 no.6
• /
• pp.625-632
• /
• 2017

Familial Parkinson's disease (PD) has been linked to point mutations and duplication of the ${\alpha}$-synuclein (${\alpha}$-syn) gene. Mutant ${\alpha}$-syn expression increases the vulnerability of neurons to exogenous insults. In this study, we developed a new PD model in the transgenic mice expressing mutant hemizygous (hemi) or homozygous (homo) A53T ${\alpha}$-synuclein (${\alpha}$-syn Tg) and their wildtype (WT) littermates by treatment with sub-toxic (10 mg/kg, i.p., daily for 5 days) or toxic (30 mg/kg, i.p., daily for 5 days) dose of 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP). Tyrosine hydroxylase and Bcl-2 levels were reduced in the ${\alpha}$-syn Tg but not WT mice by sub-toxic MPTP injection. In the adhesive removal test, time to remove paper was significantly increased only in the homo ${\alpha}$-syn Tg mice. In the challenging beam test, the hemi and homo ${\alpha}$-syn Tg mice spent significantly longer time to traverse as compared to that of WT group. In order to find out responsible proteins related with vulnerability of mutant ${\alpha}$-syn expressed neurons, DJ-1 and ubiquitin enzyme expressions were examined. In the SN, DJ-1 and ubiquitin conjugating enzyme, UBE2N, levels were significantly decreased in the ${\alpha}$-syn Tg mice. Moreover, A53T ${\alpha}$-syn overexpression decreased DJ-1 expression in SH-SY5Y cells. These findings suggest that the vulnerability to oxidative injury such as MPTP of A53T ${\alpha}$-syn mice can be explained by downregulation of DJ-1.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.4
• /
• pp.408-421
• /
• 1989

The effects of seeding and clipping termination dates, and seeding and fertilizer rates on forage and grain yields were evaluated in 1989 harvest year for dual production of forage and grain of naked and malting barleys in Cheju province. In the experiment I, 'Saessalbori' (naked barleY)1 and 'Doosan 22' (malting barley) were seeded on Sept. 21, Oct. 12 and Nov. 2, respectively. An unclipped(grain-only) treatment that was planted on Nov. 2 was included for check. In the experiment II, the two above cultivars were planted at seed rate of 14, 20 and 26 and kg/l0a. Fertilizer rates were 9-6-12, 17-13-8 and 22-16-11 (N-P$_2$O$\sub$5/-K$_2$O) kg/l0a. Seeding dates were Oct. 13 and Nov. 7 for clipped treatments and grain -only treatment(seeding rate: 14kg/l0a, N-P$_2$O$\sub$5/-K$_2$O=9-6-12 kg/l0a), respectively. All treatments in both experiments were harvested for grain yield. In Saessalbori, survival following forage removal was 100％ regardless of seeding and clipping termination dates, and seeding and fertilizer rates. In Doosan 22, survival percenage decreased with increasing seeding and fertilizer rates when plants was clipped in January to Febuary. Forage yield of two cultivars increased with early planting and delays in clipping termination and tended to increase as seeding and fertilizer rates were increased. Crude ash and fat were not affected by seeding and fertilizer rates, and clipping date. Crude protein increased with an increase in fertilizer rate and decreased with delays in clipping date. N free extract tended to increase with delaying clipping date and decreased with increasing fertilizer rate. Earlier planting resulted in earlier heading and maturity. Clipping slightly delayed heading of Saessalbori and greatly delayed that of Doosan 22. Maturity of Doosan 22 was delayed 3 to 5 days by increased fertilization. Clipping shortened culm length more severely in Doosan 22 than in Saessalbori. The later the clipping termination, the shorter the culm length. The number of spikes per m$^2$ and the number of kernels per spike were not affected by clipping in Saessalbori while those of Doosan 22 were decreased with delays in clipping termination. Delaying forage harvest resulted In a reduction in grain yield. However, final clipping on Feb. 27 reduced grain yield of Saessalbori by only 6-11 ％ compared to the grain-only treatment. In Doosan 22, forage harvest after Dec. 28 resulted in 6 to 66％ reduction of grain yield. The data indicate that grazing of naked and malting barleys until late Feb. and late Dec., respectively, might not reduce grain yields when planted on mid-Sept. to mid-Oct.